This thesis is an exploration of quantum repeaters from a practical point of view. Quantum repeaters are devices which help improve the quantum communication capacity of a lossy bosonic channel (which include photonic channels such as optical fiber) beyond what is possible using a purely lossy channel. The analyses in this thesis involve modeling the experimental imperfections inherent in the various devices which comprise a quantum repeater, then combining these models to calculate various quantities of interest. \n \nTwo systems are analyzed in this thesis. One is a simple quantum repeater, while the other is a potential building block for more complex quantum repeaters. \n \nThe simple quantum repeater scheme can be implemented with currently available technology. In it, two parties perform quantum key distribution (QKD) by exchanging photons with two quantum memories placed between them. Its secret key rate ideally scales as the square root of the transmittivity of the optical channel, which is superior to QKD schemes based on direct transmission because key rates for the latter scale at best linearly with transmittivity. Taking into account imperfections in the setup, such as detector efficiency and dark counts, we present parameter regimes in which our protocol outperforms protocols based on direct transmission. We find that implementing our scheme with trapped ions is a promising way to reach the necessary parameter regimes, and that the regimes are easier to reach if the optical channels are very lossy. \n \nThe creation of entanglement between two quantum memories is an important building block in some quantum repeater schemes. We consider a specific quantum memory consisting of an atom trapped in a cavity. The system allows a CNOT operation to be performed between an atom and a photon. We study three methods for taking advantage of this to entangle two atoms: (1) interacting a coherent pulse with each atom, then performing an entangling measurement on the pulses; (2) interacting a single coherent pulse with each atom sequentially; (3) emitting an entangled photon from one atom and interacting it with the other atom. The success probability of each method is compared, as well as the quality of the entangled states produced by each one, taking into account imperfections which appear in a specific experimental implementation of such memories. We find that there is a tradeoff between success probability and entangled state quality when coherent states are used, and that method 3 provides higher-quality entangled states than is possible with the other two methods.
This thesis is an exploration of quantum repeaters from a practical point of view. Quantum repeaters are devices which help improve the quantum communication capacity of a lossy bosonic channel (which include photonic channels such as optical fiber) beyond what is possible using a purely lossy channel. The analyses in this thesis involve modeling the experimental imperfections inherent in the various devices which comprise a quantum repeater, then combining these models to calculate various quantities of interest. \n \nTwo systems are analyzed in this thesis. One is a simple quantum repeater, while the other is a potential building block for more complex quantum repeaters. \n \nThe simple quantum repeater scheme can be implemented with currently available technology. In it, two parties perform quantum key distribution (QKD) by exchanging photons with two quantum memories placed between them. Its secret key rate ideally scales as the square root of the transmittivity of the optical channel, which is superior to QKD schemes based on direct transmission because key rates for the latter scale at best linearly with transmittivity. Taking into account imperfections in the setup, such as detector efficiency and dark counts, we present parameter regimes in which our protocol outperforms protocols based on direct transmission. We find that implementing our scheme with trapped ions is a promising way to reach the necessary parameter regimes, and that the regimes are easier to reach if the optical channels are very lossy. \n \nThe creation of entanglement between two quantum memories is an important building block in some quantum repeater schemes. We consider a specific quantum memory consisting of an atom trapped in a cavity. The system allows a CNOT operation to be performed between an atom and a photon. We study three methods for taking advantage of this to entangle two atoms: (1) interacting a coherent pulse with each atom, then performing an entangling measurement on the pulses; (2) interacting a single coherent pulse with each atom sequentially; (3) emitting an entangled photon from one atom and interacting it with the other atom. The success probability of each method is compared, as well as the quality of the entangled states produced by each one, taking into account imperfections which appear in a specific experimental implementation of such memories. We find that there is a tradeoff between success probability and entangled state quality when coherent states are used, and that method 3 provides higher-quality entangled states than is possible with the other two methods.
Future quantum networks will enable the realisation of a large family of quantum protocols, hence allowing for implementation of various tasks ranging from quantum cryptography through quantum computing to quantum metrology.In this thesis we analyse and develop the building blocks of quantum repeater networks.These networks consist of quantum repeater nodes, which are equipped with quantum memories enabling storage of quantum information.The repeater nodes are connected using optical fibres that enable for the transmission of photonic quantum signals between the repeater nodes.We specifically focus on the two building blocks: remote entanglement generation and entanglement distillation.We then investigate various proof of principle quantum repeater schemes used for generating shared secret key between distant parties.The repeater schemes that we consider utilise one to three memory nodes capable of generating memory-photon entanglement.Finally, we introduce a novel framework for investigating a foundational aspect in the use of quantum communication related to the uncertainty principle.Efficient remote entanglement generation is an indispensable building block of most near-term quantum repeater networks.In this thesis we consider various remote entanglement generation schemes that permit multiplexing, which aims at increasing the throughput of this procedure.We find that for the specific schemes that are suitable for platforms with a single communication qubit and multiple memory qubits, the performance of the multiplexing approach is strongly dependent on the time it takes to perform local operations within the memory nodes.Entanglement distillation enables for filtering out the noise from imperfect entangled states using only local operations and classical communication.Using a general framework for optimising such schemes, which we have developed, we have proven optimality of specific generic and experimentally relevant distillation schemes.We have developed a general framework for optimising such schemes, which we have used to prove optimality of various generic and experimentally relevant distillation schemes.In designing proof of principle quantum repeater schemes we assume an informationtheoretic approach, which enables us to assess their performance in a hardware-agnostic way.We find that all the schemes that we consider can prove useful in specific parameter regimes for the nitrogen-vacancy centre platform.Moreover, we find that one scheme which has already been realised experimentally in the context of remote entanglement generation, is expected to significantly outperform every possible system based on direct communication without repeaters.However, our analysis shows that encapsulating the nitrogen-vacancy centres in optical cavities for the enhancement of the emission rates is a necessary requirement for such a successful demonstration of the first proofof-principle quantum repeater.xi xii SUMMARY Finally, we investigate the quantum uncertainty principle which is a fundamental feature of quantum mechanics, allowing for security in many quantum cryptographic protocols.We find that in a particular scenario, relevant from the perspective of quantum key distribution, a significant part of the observed uncertainty is in fact due to lack of information rather than intrinsic.If the eavesdropper could access that information, she would be able to much better, or in some cases even with certainty, guess the value of the raw bit of the generated key.
As children, whispering into the ear of a friend in the presence of others allows us to pass a secret without interception, and forms one of the simplest attempts at secret communications we can employ. However, sending secret messages becomes deeply nontrivial over long distances. \n \nA solution for two parties to communicate securely is to encrypt and decrypt a message with two identical strings of bits, one for each party. In this case, the security of the encrypted message is provable and does not rely on assumptions on computational power. Quantum theory provides a clear solution for the initial distribution of these identical bit strings through Quantum Key Distribution. However, once long distances are involved, the corresponding loss involved in direct transmission ruins the effectiveness of quantum key distribution by reducing the effective rate exponentially with the distance. \n \nTo circumvent the losses involved in direct transmission, quantum repeater architectures have been proposed. We present our contributions towards three aspects of quantum repeater systems in this thesis. We ensure conditions for implementing quantum repeaters with atomic ensembles, explore the option of optomechanical systems for implementing quantum repeaters and verify the success of completed quantum repeater protocols. \n \nIn the first part of this thesis, we show how we can ensure conditions for the successful implementation of quantum repeater systems with atomic ensembles. These quantum repeater systems are formed with 1-dimensional networks, where the nodes are made up of quantum memories connected by means of single photons. This requires memories that are highly efficient. Also, if quantum repeater systems are implemented with hybrid resources, tunable photon waveforms will be desirable. We propose a protocol to implement quantum memories with atomic ensembles using a clear recipe to optimise the efficiency. We also demonstrate that a cold ensemble of Rubidium-87 can act as an efficient tunable source of single photons, along with flexibility in the produced temporal shapes. \n \nNext, we show how we can explore alternative options for the nodes of quantum repeater systems. We focus on optomechanical oscillators, and recognise that they can also be used as quantum memories. We present a witness to certify that this memory successfully operates in the quantum regime. \n \nFinally, we focus on the verification of successfully implemented quantum repeater protocols. This verification will be essential for certifying that quantum repeater systems operate as instructed. We use only local homodyne measurements to witness the success of the network, and find that the witness is robust to loss. \n \nWe thus present distinct contributions towards three important aspects of quantum repeater systems. As far as a full-fledged quantum repeater system might seem to be right now, we have faith that our work brings the field of quantum-enabled secure communications forward.
This thesis assesses the theoretical performance of a realistic multi-node quantum repeater that is implementable with current technology. A quantum repeater, by definition, allows for communication rates in a channel to be larger than what is fundamentally possible over a loss only channel. We consider a simple, one-way, multi-node quantum repeater that utilizes entanglement swapping in the absence of any quantum error correction or entanglement purification. We create a theoretical model of the quantum repeater, incorporating the imperfections of each component within the system, to get an accurate key rate using current, viable state-of-the-art experimental parameters. Our main goal is to benchmark the performance of this specific multi-node quantum repeater. We compare the performance of this multi-node system to that of a single node repeater, which has been previously analysed for this architecture. We are interested to see if there is an advantage for introducing more nodes in this type of system. We also provide some suggestions for improving the key rate performance.
Quantum information degrades over distance due to the unavoidable imperfections of the transmission channels, with loss as the leading factor. This simple fact hinders quantum communication, as it relies on propagating quantum systems. A solution to this issue is to introduce quantum repeaters at regular intervals along a lossy channel, to revive the quantum signal. In this work we study unitary one-way quantum repeaters, which do not need to perform measurements and do not require quantum memories, and are therefore considerably simpler than other schemes. We introduce and analyze two methods to construct Hamiltonians that generate a repeater interaction that can beat the fundamental repeaterless key rate bound even in the presence of an additional coupling loss, with signals that contain only a handful of photons. The natural evolution of this work will be to approximate a repeater interaction by combining simple optical elements.
Quantum communication between two remote locations often involves remote parties sharing an entangled quantum state. At present, entanglement distribution is usually performed using photons transmitted through optical fibers. However, the absorption of light in the fiber limits the communication distances to less than 200 km, even for optimal photon telecom wavelengths. To increase this distance, the quantum repeater idea was proposed. In the quantum repeater architecture, one divides communication distance into segments of the order of the attenuation length of the photons and places quantum memory nodes at the intermediate locations. Since the photon loss between intermediate locations is low, it is possible then to establish entanglement between intermediate quantum memory nodes. Once entanglement between adjacent nodes is established, one can extend it over larger distances using entanglement swapping.\n\nThe long coherence time of a quantum memory is a crucial requirement for the quantum repeater protocol. It is obvious that the coherence time of a quantum memory should be much longer that the time it takes for light to travel between remote locations. For a communication distance l = 1000 km, the corresponding time is t = l/c = 3.3 ms. One can show that for a simple repeater protocol and realistic success probabilities of entanglement generation, the required coherence time should be on the order of many seconds, while for the more complicated protocols that involve multiplexing and several quantum memory cells per intermediate node, the required coherence time is on the order of milliseconds.\n\nIn this thesis, I describe a quantum memory based on an ensemble of rubidium atoms confined in a one-dimensional optical lattice. The use of the magnetically- insensitive clock transition and suppression of atomic motion allows us to increase coherence time of the quantum memory by two-orders of magnitude compared to previous work. I also propose a method for determining the Zeeman content of atomic samples. In addition, I demonstrate the observation of quantum evolution under continuous measurement. The long quantum memory lifetime demonstrated in this work opens the way for scalable processing of quantum information and long distance quantum communication.
Long-distance transfer of quantum information is an essential ability for many applications of quantum science. A natural choice to distribute quantum information is to encode it into photons and transfer it through optical fibers. However, due to the unavoidable transmission losses present in every communication channel, the distances for efficient quantum communication via direct-state transfer are limited to a few hundred kilometers. To overcome this limitation, the use of quantum repeaters has been suggested. A quantum repeater protocol aims to establish entanglement (i.e., quantum correlation) between remote nodes by first generating entanglement over shorter distance pieces, storing it in quantum memories, and finally extending it to the whole distance using entanglement swapping. The main goal of this thesis is to design quantum repeater architectures using single solid-state quantum emitters and to develop the two-qubit gates required for performing entanglement swapping. We first explain the basic ideas of quantum repeaters and introduce potential material candidates, single erbium (168Er) and europium (151Eu) ions doped yttrium orthosilicate photonic crystals. Next, we propose a quantum repeater scheme combing erbium and europium ions to generate and distribute entanglement over long distances. We study the entanglement generation rate of the protocol and compare it with the rate of a well-known ensemble-based quantum repeater. Then, using cavity assisted interactions, we propose three different schemes to perform high fidelity two-qubit gates between single quantum systems. We quantify their expected performance in detail by taking into account many realistic imperfections and compare their strengths and weaknesses. The ability to perform local two-qubits gates is especially crucial in terms of distributing entanglement. Finally, based on our gained knowledge through these projects, we propose our second quantum repeater architecture based on erbium (167Er) ions, which outperforms the first scheme. We study two possibilities for distributing entanglement and calculate the overall fidelity as well as the distribution rate of the protocol.