Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1907.09516 · Laser & Photonics Review

Distributed Quantum Fiber Magnetometry

Shai Maayani, Christopher C. Foy, Dirk Robert Englund, Yoel Fink

Published May 17, 2019• 53 citations
arXivHTMLPDF

Abstract

Abstract Nitrogen‐vacancy (NV) quantum magnetometers offer exceptional sensitivity and long‐term stability. However, their use to date in distributed sensing applications, including remote detection of ferrous metals, geophysics, and biosensing, is limited due to the need to combine optical, microwave (MW), and magnetic excitations into a single system. Existing approaches have yielded localized devices but not distributed capabilities. In this study, a continuous system‐in‐a‐fiber architecture is reported, which enables distributed magnetic sensing over extended lengths. Key to this realization is a thermally drawn fiber that has hundreds of embedded photodiodes connected in parallel and a hollow optical waveguide that contains a fluid with NV diamonds. This fiber is placed in a larger coaxial cable to deliver the required MW excitation. This distributed quantum sensor is realized in a water‐immersible 90‐m‐long cable with 102 detection sites. A sensitivity of 63 ± 5 nT Hz−1/2 per site, limited by laser shot noise, is established along a 90 m test section. This fiber architecture opens new possibilities as a robust and scalable platform for distributed quantum sensing technologies.

DOI
10.1002/lpor.201900075

Related papers

Integrated Fibre Detection Architectures for Distributed Quantum Magnetometry

Shai Maayani, Christopher C. Foy, Dirk Robert Englund +1 more

Here we constructed a water-immersible 90-meter-long fully-integrated fiber system that allows distributed quantum magnetic sensing over large distances with a sensitivity of 63 nT Hz-1/2. Applications include remote detection of ferrous metals geophysics and biosensing. © 2019 The Author(s)

Conference on Lasers and Electro-Optics•May 5, 2019•0 citations

Integrated Fibre Detection Architectures for Distributed Quantum Magnetometry

Shai Maayani, Christopher C. Foy, Dirk Robert Englund +1 more

Here, we constructed a water-immersible 90-meter-long fully-integrated fiber system that allows distributed quantum magnetic sensing over large distances with a sensitivity of 63 nT Hz-1/2. Applications include remote detection of ferrous metals, geophysics, and biosensing.

Conference on Lasers and Electro-Optics•Jan 1, 2019•0 citations

Miniaturized magnetic-field sensor based on nitrogen-vacancy centers

Sigfrid Lindén Johansson, Dennis Lönard, Isabel Cardoso Barbosa +3 more

The nitrogen-vacancy (NV) center in diamond is a prime candidate for quantum sensing technologies. Here, we present a fully integrated and mechanically robust fiber-based endoscopic sensor with a tip diameter of 1.25 mm . On its tip, a direct laser-writing process is used to secure a diamond containing NV centers above the fiber’s core inside a polymer structure. Additionally, a metallic direct laser-written antenna structure next to the fiber facet allows efficient microwave manipulation of NV-center spins. The sensor achieves a shot-noise-limited magnetic-field sensitivity of 5.9 nT / Hz using a 15 − μ m -sized microdiamond at a microwave power of 50 mW and an optical power of 2.15 mW . Using lock-in techniques, we measure a sensitivity of 51.8 nT / Hz . Furthermore, we introduce a dual-fiber concept that enables, in combination with a direct laser-written structure, independent guiding of excitation and fluorescence light and thus reduces background autofluorescence. Moreover, controlled guiding of excitation light to the diamond while avoiding sample illumination may enable operation in light-sensitive environments such as biological tissue. While the demonstrated sensitivity is achieved using a single-fiber configuration, the dual-fiber approach provides a path toward integrating smaller diamonds, where autofluorescence would otherwise limit performance. We demonstrate the capability of vector magnetic-field measurements in the type of magnetic field used in state-of-the-art ultracold quantum gas experiments, opening a potential arena in which high resolution and high sensitivity are required.

arXiv:2402.19372•Physical Review Applied•Oct 24, 2025•14 citations

Nanophotonic quantum magnetometry in a spin-dense diamond cavity

Nicholas J. Sorensen, Elham Zohari, Joshua S. Wildeman +3 more

Quantum sensors based on the nitrogen-vacancy (NV) center in diamond are leading platforms for high-sensitivity magnetometry with nanometer-scale resolution. State-of-the-art implementations, however, typically rely on bulky free-space optics or sacrifice spatial resolution to achieve high sensitivities. Here, we realize an integrated platform that overcomes this trade-off by fabricating monolithic whispering-gallery-mode cavities from a diamond chip containing a high density of NV centers and by evanescently coupling excitation to and photoluminescence from the cavity using a tapered optical fiber. Employing a lock-in-amplified Ramsey magnetometry scheme, we achieve a photon-shot-noise-limited DC sensitivity of $58\,\text{nT}/\sqrt{\text{Hz}}$---the best sensitivity reported to date for a nanofabricated cavity-based magnetometer. The microscopic cavity size enables micrometer-scale spatial resolution and low-power operation, while fiber-coupling provides a path to scalable on-chip integration. Arrays of such sensors could enable NV-NMR spectroscopy of sub-nanoliter samples, new magnetic-gradient imaging architectures, and compact biosensing platforms.

physics.opticsCross-listedarXiv:2511.19831•Physical Review Applied•Nov 26, 2025•3 citations

Optical fibers doped with nitrogen-vacancy submicron diamonds as magnetic sensors

Mariusz Mrózek, Adam Filipkowski, Grzegorz Stępniewski +4 more

Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.

Workshop on Specialty Optical Fibers and Their Applications (WSOF)•May 29, 2025•0 citations

Photonic Links for Spin-Based Quantum Sensors

M. Reefaz Rahman, Karsten Schnier, Ryan Goldsmith +4 more

A growing variety of optically accessible spin qubits have emerged in recent years as key components for quantum sensors, qubits, and quantum memories. However, the scalability of conventional spin-based quantum architectures remains limited by direct microwave delivery, which introduces thermal noise, electromagnetic cross-talk, and design constraints for cryogenic, high-field, and distributed systems. In this work, we present a unified framework for RF-over-fiber (RFoF) control of optically accessible spins through RFoF optically detected magnetic resonance (ODMR) spectroscopy of nitrogen-vacancy (NV) centers in diamond. The RFoF platform relies on an electro-optically modulated telecom-band laser that transmits microwave signals over fiber and a high-speed photodiode that recovers the RF waveform to drive NV center spin transitions. We obtain an RFoF efficiency of 1.81\% at 2.90~GHz, corresponding to $P_{\mathrm{RF,out}}=-0.7$~dBm. The RFoF architecture provides a path toward low-noise, thermally isolated, and cryo-compatible ODMR systems bridging conventional spin-based quantum sensing protocols with emerging distributed quantum technologies.

quant-pharXiv:2601.22011•Applied Physics Letters•Jan 30, 2026•1 citation
Abstract Nitrogen‐vacancy (NV) quantum magnetometers offer exceptional sensitivity and long‐term stability. However, their use to date in distributed sensing applications, including remote detection of ferrous metals, geophysics, and biosensing, is limited due to the need to combine optical, microwave (MW), and magnetic excitations into a single system. Existing approaches have yielded localized devices but not distributed capabilities. In this study, a continuous system‐in‐a‐fiber architecture is reported, which enables distributed magnetic sensing over extended lengths. Key to this realization is a thermally drawn fiber that has hundreds of embedded photodiodes connected in parallel and a hollow optical waveguide that contains a fluid with NV diamonds. This fiber is placed in a larger coaxial cable to deliver the required MW excitation. This distributed quantum sensor is realized in a water‐immersible 90‐m‐long cable with 102 detection sites. A sensitivity of 63 ± 5 nT Hz−1/2 per site, limited by laser shot noise, is established along a 90 m test section. This fiber architecture opens new possibilities as a robust and scalable platform for distributed quantum sensing technologies.
The nitrogen-vacancy (NV) center in diamond is a prime candidate for quantum sensing technologies. Here, we present a fully integrated and mechanically robust fiber-based endoscopic sensor with a tip diameter of 1.25 mm . On its tip, a direct laser-writing process is used to secure a diamond containing NV centers above the fiber’s core inside a polymer structure. Additionally, a metallic direct laser-written antenna structure next to the fiber facet allows efficient microwave manipulation of NV-center spins. The sensor achieves a shot-noise-limited magnetic-field sensitivity of 5.9 nT / Hz using a 15 − μ m -sized microdiamond at a microwave power of 50 mW and an optical power of 2.15 mW . Using lock-in techniques, we measure a sensitivity of 51.8 nT / Hz . Furthermore, we introduce a dual-fiber concept that enables, in combination with a direct laser-written structure, independent guiding of excitation and fluorescence light and thus reduces background autofluorescence. Moreover, controlled guiding of excitation light to the diamond while avoiding sample illumination may enable operation in light-sensitive environments such as biological tissue. While the demonstrated sensitivity is achieved using a single-fiber configuration, the dual-fiber approach provides a path toward integrating smaller diamonds, where autofluorescence would otherwise limit performance. We demonstrate the capability of vector magnetic-field measurements in the type of magnetic field used in state-of-the-art ultracold quantum gas experiments, opening a potential arena in which high resolution and high sensitivity are required.
Quantum sensors based on the nitrogen-vacancy (NV) center in diamond are leading platforms for high-sensitivity magnetometry with nanometer-scale resolution. State-of-the-art implementations, however, typically rely on bulky free-space optics or sacrifice spatial resolution to achieve high sensitivities. Here, we realize an integrated platform that overcomes this trade-off by fabricating monolithic whispering-gallery-mode cavities from a diamond chip containing a high density of NV centers and by evanescently coupling excitation to and photoluminescence from the cavity using a tapered optical fiber. Employing a lock-in-amplified Ramsey magnetometry scheme, we achieve a photon-shot-noise-limited DC sensitivity of 58 nT/Hz58\,\text{nT}/\sqrt{\text{Hz}}58nT/Hz​---the best sensitivity reported to date for a nanofabricated cavity-based magnetometer. The microscopic cavity size enables micrometer-scale spatial resolution and low-power operation, while fiber-coupling provides a path to scalable on-chip integration. Arrays of such sensors could enable NV-NMR spectroscopy of sub-nanoliter samples, new magnetic-gradient imaging architectures, and compact biosensing platforms.
Coupling NV-rich diamond with optical fibers opens the door to guiding quantum information via the NV center's spin state. While diamond-functionalized fiber sensors have shown excellent sensitivity to localized magnetic fields, their distributed sensing capabilities have been untapped. By embedding diamonds throughout the fiber's core, we create a sensor sensitive to magnetic fields along its entire length. This theoretically allows for distributed optical readout of small magnetic fields. However, challenges remain in pinpointing the source's location and understanding the performance of a sensor where the NV-center fluorescence is detected at a single endpoint, integrating signals from color centers in varying field and microwave conditions. We present a demonstration of distributed magnetic field sensing using a step-index fiber with NV-rich diamonds incorporated throughout the core. By collecting the NV fluorescence at the fiber's output and recording Optically Detected Magnetic Resonance (ODMR) spectra as the excitation source moves, we can map the magnetic field profile along the fiber, accurately locating the field source. This straightforward sensor design holds promise for applications such as magnetic field mapping of integrated circuits in photonics and spintronics.
A growing variety of optically accessible spin qubits have emerged in recent years as key components for quantum sensors, qubits, and quantum memories. However, the scalability of conventional spin-based quantum architectures remains limited by direct microwave delivery, which introduces thermal noise, electromagnetic cross-talk, and design constraints for cryogenic, high-field, and distributed systems. In this work, we present a unified framework for RF-over-fiber (RFoF) control of optically accessible spins through RFoF optically detected magnetic resonance (ODMR) spectroscopy of nitrogen-vacancy (NV) centers in diamond. The RFoF platform relies on an electro-optically modulated telecom-band laser that transmits microwave signals over fiber and a high-speed photodiode that recovers the RF waveform to drive NV center spin transitions. We obtain an RFoF efficiency of 1.81\% at 2.90~GHz, corresponding to PRF,out=−0.7P_{\mathrm{RF,out}}=-0.7PRF,out​=−0.7~dBm. The RFoF architecture provides a path toward low-noise, thermally isolated, and cryo-compatible ODMR systems bridging conventional spin-based quantum sensing protocols with emerging distributed quantum technologies.