Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1905.02134 · Physical Review A

Photon-photon interactions in dynamically coupled cavities

Mikkel Heuck, Kurt A. Jacobs, Dirk Robert Englund

Published Apr 20, 2020• 44 citations
arXivHTMLPDF

Abstract

We study theoretically the interaction between two photons in a nonlinear cavity. The photons are absorbed into the cavity by an effective tuning of its input-output coupling via external control of a coupling to a second, strongly output-coupled cavity mode. Such ``dynamically coupled'' cavities, which can be implemented using bulk ${\ensuremath{\chi}}^{(2)}$ and ${\ensuremath{\chi}}^{(3)}$ nonlinearities, enable incoming photon wave packets to be absorbed into the cavity with high fidelity when the duration of the control is similar to that of the wave packets. Further, this configuration can be used to avoid limitations in the photon-photon interaction time set by the delay-bandwidth product of passive cavities and enables the elimination of wave-packet distortions caused by dispersive cavity transmission and reflection. We consider three kinds of nonlinearities, two arising from ${\ensuremath{\chi}}^{(2)}$ and ${\ensuremath{\chi}}^{(3)}$ materials and one due to an interaction with a two-level emitter. To analyze the input and output of few-photon wave packets, we use a Schr\"odinger-picture formalism in which traveling-wave fields are discretized into infinitesimal time bins. We suggest that dynamically coupled cavities provide a very useful tool for improving the performance of quantum devices relying on cavity-enhanced light-matter interactions such as single-photon sources and atomlike quantum memories with photon interfaces. As an example, we present simulation results showing that high-fidelity two-qubit entangling gates may be constructed using any of the considered nonlinear interactions.

DOI
10.1103/physreva.101.042322

Related papers

Controlled-Phase Gate Using Dynamically Coupled Cavities and Optical Nonlinearities

Mikkel Heuck, Kurt A. Jacobs, Dirk Robert Englund

We show that relatively simple integrated photonic circuits have the potential to realize a high fidelity deterministic controlled-phase gate between photonic qubits using bulk optical nonlinearities. The gate is enabled by converting travelling continuous-mode photons into stationary cavity modes using strong classical control fields that dynamically change the effective cavity-waveguide coupling rate. This architecture succeeds because it reduces the wave packet distortions that otherwise accompany the action of optical nonlinearities [J. Shapiro, Phys. Rev. A 73, 062305 (2006)PLRAAN1050-294710.1103/PhysRevA.73.062305; J. Gea-Banacloche, Phys. Rev. A 81, 043823 (2010)PLRAAN1050-294710.1103/PhysRevA.81.043823]. We show that high-fidelity gates can be achieved with self-phase modulation in χ^{(3)} materials as well as second-harmonic generation in χ^{(2)} materials. The gate fidelity asymptotically approaches unity with increasing storage time for an incident photon wave packet with fixed duration. We also show that dynamically coupled cavities enable a trade-off between errors due to loss and wave packet distortion. Our proposed architecture represents a new approach to practical implementation of quantum gates that is room-temperature compatible and only relies on components that have been individually demonstrated.

arXiv:1909.05751•Physical Review Letters•Apr 20, 2020•85 citations

Deterministic quantum logic gates based on optical nonlinearities in controllable cavities

Mikkel Heuck, Kurt A. Jacobs, Dirk Robert Englund +1 more

A central goal in photonic quantum information processing is the ability to perform high-fidelity logic gates between multiple optical qubits. Here, we present our recent theoretical work on using optical nonlinearities to implement controlled-phase gates between two optical qubits. Our approach is based on using dynamically coupled cavities to convert photons travelling in a waveguide into highly confined cavity modes. This conversion enables very strong interactions between photons in quasi-monochromatic modes, which enables high fidelity gates. We will discuss gate protocols based on second- and third order nonlinear materials as well as interactions with two-level emitters.

Quantum Computing, Communication, and Simulation•Mar 4, 2021•0 citations

Efficient, high-fidelity single-photon switch based on waveguide-coupled cavities

Mateusz Duda, Luke Brunswick, Luke R. Wilson +1 more

We demonstrate theoretically that waveguide-coupled cavities with embedded two-level emitters can act as a highly efficient, high-fidelity single-photon switch. The photon switch is an optical router triggered by a classical signal—the propagation direction of single input photons in the waveguide is controlled by changing the emitter-cavity coupling parameters , for example, using applied fields. The switch reflects photons in the weak emitter-cavity coupling regime and transmits photons in the strong coupling regime. By calculating transmission and reflection spectra using the input-output formalism of quantum optics and the transfer matrix approach, we obtain the fidelity and efficiency of the switch with a single-photon input in both regimes. We find that a single waveguide-coupled cavity can route input photon wave packets with near-unity efficiency and fidelity if the wave packet width is smaller than the cavity mode linewidth. We also find that using multiple waveguide-coupled cavities increases the switching bandwidth, allowing wider wave packets to be routed with high efficiency and fidelity. For example, an array of three waveguide-coupled cavities can reflect an input Gaussian wave packet with a full width at half-maximum of 1 nm (corresponding to a few-picosecond pulse) with an efficiency E r = 96.4 % and a fidelity F r = 97.7 % , or transmit the wave packet with an efficiency E t = 99.7 % and a fidelity F t = 99.8 % . Such efficient, high-fidelity single-photon routing is essential for scalable photonic quantum technologies. Published by the American Physical Society 2024

arXiv:2402.05714•Physical Review A•Oct 15, 2024•11 citations

Quantum input-output theory for optical cavities with arbitrary coupling strength: Application to two-photon wave-packet shaping

Michael G. Raymer, Colin J. McKinstrie

We develop quantum-optical input-output theory for resonators with arbitrary coupling strength, and for input fields whose spectrum can be wider than the cavity free-spectral range, while ensuring that the field-operator commutator relations in space-time variables are correct. The cavity-field commutator exhibits a series of space-time ``echoes,'' representing causal connections of certain space-time points by light propagation. We apply the theory to two-photon wave-packet shaping by cavity reflection, which displays a remarkable illustration of dispersion cancellation. We also show that the theory is amenable to inclusion of intracavity absorbing and emitting atoms, allowing, for example, dissipative losses within the cavity to be incorporated in a quantum mechanically correct way.

arXiv:1309.5915•Physical Review A•Oct 11, 2013•34 citations

A photon-photon interface with an atomic ensemble in an optical cavity

Kristin M. Beck

Since the emergence of quantum computing as a field, interactions between two-level systems that can carry quantum information have been conceptualized in terms of quantum devices. Here, I demonstrate four such devices for optical photons traveling in two different modes: an all-optical switch and transistor, a nondestructive photon detector, a phase shifter, and a quantum state generator. These devices rely on a nonlinear optical interface comprised of a few thousand atoms inside of a high-finesse optical cavity. Signal light is sent through a mode transverse to the cavity and is stored or travels through the atoms as a collective excitation. The corresponding atomic population couples to the cavity mode's optical field. The strength of the resulting photon-photon interaction is governed by the optical depth of the atoms for the signal light, and the strong atom-photon coupling in the optical cavity. I first demonstrate an all-optical switch and transistor using blocking interactions that reduce the cavity's transmission by a factor of 11 +/- 1 in the presence of a stored signal photon. This interaction creates anticorrelations between the output light in the signal and cavity paths. I show that these anticorrelations persist in time continuous operation when the photon signal and cavity arrive at the same time. Then, I turn to photon detection. I reconfigure the system and reconceptualize it as a nondestructive, cavity-based detector for signal light. I demonstrate strong correlations between this nondestructive detection and a subsequent destructive detection with non-destructive detection efficiency of 0.5%. Next, I show that a single cavity photon can shift the phase of stored signal light by up to 1.0 +/- 0.4 rad and demonstrate entanglement between output cavity and signal photons. Finally, I present recent experiments where this entanglement is used to modify the phase and amplitude of the signal light by making a projective measurement on the cavity light.

•Jan 1, 2016•0 citations

Novel quantum technology based on atom-cavity physics

Chun‐Hsu Su

Cavity quantum electrodynamics explores the dynamics and manipulation of quantized electromagnetic fields and atomic systems coherently coupled inside an electromagnetic resonator or cavity. High-quality, small-volume cavities have been exploited as the critical component in numerous promising schemes for developing quantum technology in this era of quantum revolution.\n \n Within this context, this thesis investigates various prospective quantum technology based on atom-cavity systems, from new optical-cavity designs, through to cavity-enhanced single-photon sources in diamond for secure communication, quantum controls for photon pulse-shaping, qubit preparation and implementing faster quantum gates, and finally novel metamaterials built of cavity-arrays.\n \n The discussion begins with a proposal of novel slot-waveguide cavity designs for visible wavelength operations. Optimization to minimize cavity mode volumes in these structures is conducted, showing that they are capable of generating stronger atom-photon couplings than state-of-the-art cubic-wavelength cavities. The use of the diamond colour centres are then reviewed with original work carried out to show that spectral bandwidth/purity, emission rate, quantum efficiency and reliability can be improved by the use of cavities. These results improve the prospects of the centres for practical applications in long-distance, high-speed quantum communication.\n \n Next, a dynamic control for modifying effective cavity properties in a coupled-cavity arrangement is introduced. The scheme can be applied to perform reversible switching of single photons into and out of cavities, and temporal shaping and time-encoding of single photons. The reversible photon-switching control is applied to implement a two-qubit quantum gate, which by breaking the time-bandwidth limitation, outperforms comparable passive devices.\n \n Finally, we present a novel metamaterial design based on cavity-arrays and coupled atom-cavity systems, which can be used to engineer anomalous light response and complex waveguiding properties. In particular, as an introductory application, demonstrations of superlensing effects, which are pertinent for subwavelength imaging, are presented.

•Jan 1, 2010•5 citations
We study theoretically the interaction between two photons in a nonlinear cavity. The photons are absorbed into the cavity by an effective tuning of its input-output coupling via external control of a coupling to a second, strongly output-coupled cavity mode. Such ``dynamically coupled'' cavities, which can be implemented using bulk \ensuremathχ(2){\ensuremath{\chi}}^{(2)}\ensuremathχ(2) and \ensuremathχ(3){\ensuremath{\chi}}^{(3)}\ensuremathχ(3) nonlinearities, enable incoming photon wave packets to be absorbed into the cavity with high fidelity when the duration of the control is similar to that of the wave packets. Further, this configuration can be used to avoid limitations in the photon-photon interaction time set by the delay-bandwidth product of passive cavities and enables the elimination of wave-packet distortions caused by dispersive cavity transmission and reflection. We consider three kinds of nonlinearities, two arising from \ensuremathχ(2){\ensuremath{\chi}}^{(2)}\ensuremathχ(2) and \ensuremathχ(3){\ensuremath{\chi}}^{(3)}\ensuremathχ(3) materials and one due to an interaction with a two-level emitter. To analyze the input and output of few-photon wave packets, we use a Schr"odinger-picture formalism in which traveling-wave fields are discretized into infinitesimal time bins. We suggest that dynamically coupled cavities provide a very useful tool for improving the performance of quantum devices relying on cavity-enhanced light-matter interactions such as single-photon sources and atomlike quantum memories with photon interfaces. As an example, we present simulation results showing that high-fidelity two-qubit entangling gates may be constructed using any of the considered nonlinear interactions.
We show that relatively simple integrated photonic circuits have the potential to realize a high fidelity deterministic controlled-phase gate between photonic qubits using bulk optical nonlinearities. The gate is enabled by converting travelling continuous-mode photons into stationary cavity modes using strong classical control fields that dynamically change the effective cavity-waveguide coupling rate. This architecture succeeds because it reduces the wave packet distortions that otherwise accompany the action of optical nonlinearities [J. Shapiro, Phys. Rev. A 73, 062305 (2006)PLRAAN1050-294710.1103/PhysRevA.73.062305; J. Gea-Banacloche, Phys. Rev. A 81, 043823 (2010)PLRAAN1050-294710.1103/PhysRevA.81.043823]. We show that high-fidelity gates can be achieved with self-phase modulation in χ^{(3)} materials as well as second-harmonic generation in χ^{(2)} materials. The gate fidelity asymptotically approaches unity with increasing storage time for an incident photon wave packet with fixed duration. We also show that dynamically coupled cavities enable a trade-off between errors due to loss and wave packet distortion. Our proposed architecture represents a new approach to practical implementation of quantum gates that is room-temperature compatible and only relies on components that have been individually demonstrated.
A central goal in photonic quantum information processing is the ability to perform high-fidelity logic gates between multiple optical qubits. Here, we present our recent theoretical work on using optical nonlinearities to implement controlled-phase gates between two optical qubits. Our approach is based on using dynamically coupled cavities to convert photons travelling in a waveguide into highly confined cavity modes. This conversion enables very strong interactions between photons in quasi-monochromatic modes, which enables high fidelity gates. We will discuss gate protocols based on second- and third order nonlinear materials as well as interactions with two-level emitters.
We demonstrate theoretically that waveguide-coupled cavities with embedded two-level emitters can act as a highly efficient, high-fidelity single-photon switch. The photon switch is an optical router triggered by a classical signal—the propagation direction of single input photons in the waveguide is controlled by changing the emitter-cavity coupling parameters , for example, using applied fields. The switch reflects photons in the weak emitter-cavity coupling regime and transmits photons in the strong coupling regime. By calculating transmission and reflection spectra using the input-output formalism of quantum optics and the transfer matrix approach, we obtain the fidelity and efficiency of the switch with a single-photon input in both regimes. We find that a single waveguide-coupled cavity can route input photon wave packets with near-unity efficiency and fidelity if the wave packet width is smaller than the cavity mode linewidth. We also find that using multiple waveguide-coupled cavities increases the switching bandwidth, allowing wider wave packets to be routed with high efficiency and fidelity. For example, an array of three waveguide-coupled cavities can reflect an input Gaussian wave packet with a full width at half-maximum of 1 nm (corresponding to a few-picosecond pulse) with an efficiency E r = 96.4 % and a fidelity F r = 97.7 % , or transmit the wave packet with an efficiency E t = 99.7 % and a fidelity F t = 99.8 % . Such efficient, high-fidelity single-photon routing is essential for scalable photonic quantum technologies. Published by the American Physical Society 2024
We develop quantum-optical input-output theory for resonators with arbitrary coupling strength, and for input fields whose spectrum can be wider than the cavity free-spectral range, while ensuring that the field-operator commutator relations in space-time variables are correct. The cavity-field commutator exhibits a series of space-time ``echoes,'' representing causal connections of certain space-time points by light propagation. We apply the theory to two-photon wave-packet shaping by cavity reflection, which displays a remarkable illustration of dispersion cancellation. We also show that the theory is amenable to inclusion of intracavity absorbing and emitting atoms, allowing, for example, dissipative losses within the cavity to be incorporated in a quantum mechanically correct way.
Since the emergence of quantum computing as a field, interactions between two-level systems that can carry quantum information have been conceptualized in terms of quantum devices. Here, I demonstrate four such devices for optical photons traveling in two different modes: an all-optical switch and transistor, a nondestructive photon detector, a phase shifter, and a quantum state generator. These devices rely on a nonlinear optical interface comprised of a few thousand atoms inside of a high-finesse optical cavity. Signal light is sent through a mode transverse to the cavity and is stored or travels through the atoms as a collective excitation. The corresponding atomic population couples to the cavity mode's optical field. The strength of the resulting photon-photon interaction is governed by the optical depth of the atoms for the signal light, and the strong atom-photon coupling in the optical cavity. I first demonstrate an all-optical switch and transistor using blocking interactions that reduce the cavity's transmission by a factor of 11 +/- 1 in the presence of a stored signal photon. This interaction creates anticorrelations between the output light in the signal and cavity paths. I show that these anticorrelations persist in time continuous operation when the photon signal and cavity arrive at the same time. Then, I turn to photon detection. I reconfigure the system and reconceptualize it as a nondestructive, cavity-based detector for signal light. I demonstrate strong correlations between this nondestructive detection and a subsequent destructive detection with non-destructive detection efficiency of 0.5%. Next, I show that a single cavity photon can shift the phase of stored signal light by up to 1.0 +/- 0.4 rad and demonstrate entanglement between output cavity and signal photons. Finally, I present recent experiments where this entanglement is used to modify the phase and amplitude of the signal light by making a projective measurement on the cavity light.
Cavity quantum electrodynamics explores the dynamics and manipulation of quantized electromagnetic fields and atomic systems coherently coupled inside an electromagnetic resonator or cavity. High-quality, small-volume cavities have been exploited as the critical component in numerous promising schemes for developing quantum technology in this era of quantum revolution.\n \n Within this context, this thesis investigates various prospective quantum technology based on atom-cavity systems, from new optical-cavity designs, through to cavity-enhanced single-photon sources in diamond for secure communication, quantum controls for photon pulse-shaping, qubit preparation and implementing faster quantum gates, and finally novel metamaterials built of cavity-arrays.\n \n The discussion begins with a proposal of novel slot-waveguide cavity designs for visible wavelength operations. Optimization to minimize cavity mode volumes in these structures is conducted, showing that they are capable of generating stronger atom-photon couplings than state-of-the-art cubic-wavelength cavities. The use of the diamond colour centres are then reviewed with original work carried out to show that spectral bandwidth/purity, emission rate, quantum efficiency and reliability can be improved by the use of cavities. These results improve the prospects of the centres for practical applications in long-distance, high-speed quantum communication.\n \n Next, a dynamic control for modifying effective cavity properties in a coupled-cavity arrangement is introduced. The scheme can be applied to perform reversible switching of single photons into and out of cavities, and temporal shaping and time-encoding of single photons. The reversible photon-switching control is applied to implement a two-qubit quantum gate, which by breaking the time-bandwidth limitation, outperforms comparable passive devices.\n \n Finally, we present a novel metamaterial design based on cavity-arrays and coupled atom-cavity systems, which can be used to engineer anomalous light response and complex waveguiding properties. In particular, as an introductory application, demonstrations of superlensing effects, which are pertinent for subwavelength imaging, are presented.