Annealing approach to quantum tomography is theoretically proposed. First, based on the maximum entropy principle, we introduce classical parameters to combine "quantum models (or quantum states)" given a prior for potentially representing the unknown target state. Then, we formulate the quantum tomography as an optimization problem on the classical parameters, by employing relative entropy of the parametrized state with the target state as the objective function to be minimized. We show that the objective function is physically implementable, in a theoretical sense at least, as an effective Hamiltonian to be induced by physical interactions of the system with environment systems being prepared in the target state. Corollary, applying quantum annealing to the effective Hamiltonian, we can execute quantum tomography by obtaining the ground state that gives the optimal parameters.
Annealing approach to quantum tomography is theoretically proposed. First, based on the maximum entropy principle, we introduce classical parameters to combine "quantum models (or quantum states)" given a prior for potentially representing the unknown target state. Then, we formulate the quantum tomography as an optimization problem on the classical parameters, by employing relative entropy of the parametrized state with the target state as the objective function to be minimized. We show that the objective function is physically implementable, in a theoretical sense at least, as an effective Hamiltonian to be induced by physical interactions of the system with environment systems being prepared in the target state. Corollary, applying quantum annealing to the effective Hamiltonian, we can execute quantum tomography by obtaining the ground state that gives the optimal parameters.
The problem of quantum tomography is to estimate an unknown quantum state ρ from a measurement of n copies of ρ. One can ask which tomography protocol, i.e.\ which choice of multi-copy measurement, gives the best possible estimate of ρ. To do so, we characterize tomography protocols by their \emph{rate function}, which governs the exponential rate at which a protocol assigns probability to a particular estimate σ of the true state ρ. This rate function is a quantum mechanical generalization of the classical relative entropy between the true state and its estimate, and depends on the choice of protocol. It is bounded by the quantum relative entropy, and we show that this bound is sharp: for any ρ and σ we construct a family of protocols whose rate functions converge to the quantum relative entropy D(σ∥ρ).
We consider the family of covariant tomography protocols; these are the basis independent state estimation schemes that assume no prior information about ρ and σ. Keyl described a specific tomography protocol based on Schur sampling, and conjectured that among all covariant tomography protocols it has the largest possible rate function for all σ and ρ. We prove this conjecture. The resulting rate function is an annealed version of quantum relative entropy, due to the cost of learning the eigenbasis in covariant quantum state tomography.
Quantum state tomography is an integral part of quantum computation and offers the starting point for the validation of various quantum devices. One of the central tasks in the field of state tomography is to reconstruct, with high fidelity, the quantum states of a quantum system. From an experiment on a real quantum device, one can obtain the mean measurement values of different operators. With such data as input, in this report we employ the maximal entropy formalism to construct the least biased mixed quantum state that is consistent with the given set of expectation values. Even though, in principle, the reported formalism is quite general and should work for an arbitrary set of observables, in practice we shall demonstrate the efficacy of the algorithm on an informationally complete (IC) set of Hermitian operators. Such a set possesses the advantage of uniquely specifying a single quantum state from which the experimental measurements have been sampled and hence renders the rare opportunity not only to construct a least-biased quantum state but even replicate the exact state prepared experimentally within a preset tolerance. The primary workhorse of the algorithm is reconstructing an energy function which we designate as the effective Hamiltonian of the system, and parameterizing it with Lagrange multipliers, according to the formalism of maximal entropy. These parameters are thereafter optimized variationally so that the reconstructed quantum state of the system converges to the true quantum state within an error threshold. To this end, we employ a parameterized quantum circuit and a hybrid quantum-classical variational algorithm to obtain such a target state, making our recipe easily implementable on a near-term quantum device.
Quantum annealing is a method based on simulated annealing where temperature variations are replaced by quantum fluctuations that cause qubit state transitions. ISING problems and Quadratic Unconstrained Binary Optimization problems (QUBO) can be tackled by quantum annealing-based machines. We can link the interconnected qubits of the machine and the binaries of our model: qubits are binary variables and each pair of them linked by a coupler has a strong impact on the equality or the non-equality of the two binaries of the associated pair. Quantum annealing is based on the fact that any system tends to seek its minimum energy state. Starting from qubits in a state of superposition where all the solutions to the problem are fairly represented, the machine will apply a magnetic field by targeting the qubits and couplers in such a way as to make their value energetically favorable in the direction of optimization (minimization). For the coupled qubits, it is the quadratic products of the binary variables that are considered here and the physical system will make it energetically favorable for them to take (or not) the same values. To work on these machines based on quantum annealing in order to solve optimization problems with constraints, the latter must be relaxed while penalizing the Objective function. After presenting the case of the Max-Cut problem, we will look at such constrained problems.
We introduce a fast and accurate heuristic for adaptive tomography that addresses many of the limitations of prior methods.Previous approaches were either too computationally intensive or tailored to handle special cases such as single qubits or pure states.By contrast, our approach combines the efficiency of online optimization with generally applicable and well-motivated data-processing techniques.We numerically demonstrate these advantages in several scenarios including mixed states, higher-dimensional systems, and restricted measurements.Quantum information processing (QIP) promises advantages in a wide range of different contexts, including machine learning [2-4], chemistry simulation [5][6][7], and number theory [8,9].As such, the experimental effort to build useful QIP devices has exploded in recent years.In the course of this effort, quantum tomography is a valuable tool for diagnosing and debugging small quantum devices, and has subsequently seen a variety of different advances.In particular, Bayesian approaches to tomography which are especially well suited to utilizing prior information and adapting to changing experimental conditions have developed significantly in recent years [10-13], presenting a useful experimental tool [14][15][16].In this paper we demonstrate the efficiency and accuracy of an adaptive tomography protocol that we call PAQT: practical adaptive quantum tomography.PAQT intelligently selects new measurements based on the outcomes of previous ones [10,[17][18][19][20][21].Adaptivity has been experimentally demonstrated [14,15,[22][23][24][25], but is not currently standard practice.Though adaptivity increases accuracy, the computational costs incurred outweigh that of simply repeating standard measurements many times.The PAQT approach employs a simple heuristic that can be efficiently computed between measurements, even with embedded hardware [26][27][28][29].The algorithm we propose is therefore compatible with modern experimental design and avoids an important limitation of previous approaches.We base our algorithm off of self-guided quantum tomography (SGQT), which treats adaptive tomography as a direct optimization problem rather than a new optimization problem between each measurement [30].Though this affords an efficient and easy to implement adaptive heuristic, SGQT is not without its limitations.It requires assuming that the target state is pure, and it does not return rich region estimates for a state.What PAQT achieves is to effectively combine SGQT with conventional and easily-implemented tomographic estimators, such as the Bayesian particle filter or least-squares fit (LSF) estimators.Under this approach, an experimentalist can collect data using SGQT (even if its assumptions are not met), and then post-process this data using particle filtering or LSF.The benefit of PAQT is two-fold.(1) From the point of view of traditional tomography, it gives an adaptive tomography protocol requiring only modest computational resources, as the bulk of the computational cost is offloaded to post-processing.(2) From the point of view of simulation-based optimization tomography (such as SGQT), it effectively augments the output with region estimation providing a statistically robust quantification of uncertainty.Thus, while we do not explicitly demonstrate that the improved scaling of Ferrie [30] remains in the more general case considered here, PAQT does provide a practical and efficient procedure for performing adaptive quantum tomography with rigorous statistical principles.
Quantum annealing is a generic name of quantum algorithms that use quantum-mechanical fluctuations to search for the solution of an optimization problem. It shares the basic idea with quantum adiabatic evolution studied actively in quantum computation. The present paper reviews the mathematical and theoretical foundations of quantum annealing. In particular, theorems are presented for convergence conditions of quantum annealing to the target optimal state after an infinite-time evolution following the Schrödinger or stochastic (Monte Carlo) dynamics. It is proved that the same asymptotic behavior of the control parameter guarantees convergence for both the Schrödinger dynamics and the stochastic dynamics in spite of the essential difference of these two types of dynamics. Also described are the prescriptions to reduce errors in the final approximate solution obtained after a long but finite dynamical evolution of quantum annealing. It is shown there that we can reduce errors significantly by an ingenious choice of annealing schedule (time dependence of the control parameter) without compromising computational complexity qualitatively. A review is given on the derivation of the convergence condition for classical simulated annealing from the view point of quantum adiabaticity using a classical-quantum mapping.
The quantum annealing devices, which encode the solution to a computational problem in the ground state of a quantum Hamiltonian, are implemented in D-Wave systems with more than 2,000 qubits. However, quantum annealing can solve only a classical combinatorial optimization problem such as an Ising model, or equivalently, a quadratic unconstrained binary optimization (QUBO) problem. In this paper, we formulate the QUBO model to solve elliptic problems with Dirichlet and Neumann boundary conditions using the finite element method. In this formulation, we develop the objective function of quadratic binary variables represented by qubits and the system finds the binary string combination minimizing the objective function globally. Based on the QUBO formulation, we introduce an iterative algorithm to solve the elliptic problems. We discuss the validation of the modeling on the D-Wave quantum annealing system.