High-fidelity readout of semiconductor-based qubits (in particular, Majorana qubits of the future) could be accomplished by dispersive readout, as already used with superconducting qubits. So far, though, the dispersive signals have been small, and the required integration times much longer than typical qubit coherence times. This work shows that signal amplitude can be vastly increased by strongly coupling a sensing gate to a readout quantum dot. This coupling allows readout of this system in the microsecond regime, which is on par with the state of the art for other qubits. Here the chief limiting factor of the signal-to-noise ratio is tunnel coupling.
High-fidelity readout of semiconductor-based qubits (in particular, Majorana qubits of the future) could be accomplished by dispersive readout, as already used with superconducting qubits. So far, though, the dispersive signals have been small, and the required integration times much longer than typical qubit coherence times. This work shows that signal amplitude can be vastly increased by strongly coupling a sensing gate to a readout quantum dot. This coupling allows readout of this system in the microsecond regime, which is on par with the state of the art for other qubits. Here the chief limiting factor of the signal-to-noise ratio is tunnel coupling.
Spin and topological-qubit based quantum computers require an easily scalable and highly sensitive method for readout and manipulation, for which Dispersive Gate Sensing (DGS) is a promising candidate [1, 2]. DGS enables sensing of single electron tunneling events in a mesoscopic system by measuring a reflected Radio Frequency (RF) signal from a resonator capacitively coupled to one of the system’s gate electrodes. From the resonator’s perspective, the system is modeled as an effective ‘parametric capacitance’ [3]. Motivated by its viability for qubit readout and control, we measure transport characteristics of a semiconducting-superconducting hybrid charge island system using this method. Doing so, we observe a spin degeneracy modulation of interdot tunnel couplings resulting from hybridization of a dot orbital with a subgap state of the superconductor, measured entirely within Coulomb blockade. Without DC measurement, we also track a subgap state’s energy via voltage intervals between island charge states as a function of field. Subsequently, we attempt to correlate changes in the resonator’s internal dissipation with coherence of tunneling into the superconducting island. In particular, we collapse a superconducting island’s lowest energy state to the Fermi level by applying a magnetic field. Contrary to expectations, internal dissipation in the resonator did not change dramatically with field, in fact decreasing at charge degeneracy points at all field strengths. We corroborate measurements with existing theory, augmented by simple analytical and numerical models demonstrating that coherence factors of superconducting quasiparticle states and the degeneracy of dot orbitals modulate parametric capacitance. A master equation model of finite temperature interdot tunneling is solved, agreeing with experimental evidence that Sisyphus dissipation is negligible when a dot orbital is hybridized with multiple independent quasiparticle states. To be employed in quantum computers, a full understanding of all phenomena contributing to a DGS signal in these hybrid systems is critical. Hence, these results mark a step towards unambiguous readout of Majorana parity in topological qubits [4].
Dispersive charge sensing is realized in hybrid semiconductor-superconductor nanowires in gate-defined single- and double-island device geometries. Signal-to-noise ratios (SNRs) were measured in both the frequency and time domains. Frequency-domain measurements were carried out as a function of frequency and power and yield a charge sensitivity of 1 × 10–3 e/Hz for an ∼11 MHz measurement bandwidth. Time-domain measurements yield SNR > 1 for a 20 μs integration time. At zero magnetic field, photon-assisted tunneling was detected dispersively in a double-island geometry, indicating coherent hybridization of the two superconducting islands. At an axial magnetic field of 0.6 T, subgap states are detected dispersively, demonstrating the suitability of the method to sensing in the topological regime.
Quantum computers can solve some problems exponentially faster than classical computers. Unfortunately, the computational power of quantum computers is currently limited by the number of working qubits. It is difficult to scale up these systems, because qubits are easily affected by noise in their environment. This noise leads to decoherence: loss of the qubit’s encoded information. A possible solution to diminish decoherence is using Majorana box qubits, as these qubits are predicted to be insensitive to local noise. However, this promising type of qubit does not exist yet. With the research described in this thesis, we aim to contribute to the development of Majorana box qubits (MBQs). In these qubits, Majorana zero modes, the basic elements of MBQs, are contained within a superconducting island to suppress Majorana parity fluctuations caused by quasiparticle poisoning. To enable parity readout of the MBQ, these modes are coupled to quantum dots within a nanowire network. To help realize MBQs, we need a better understanding of quasiparticles in superconducting islands, parity-readout techniques, and ways to fabricate nanowire networks. These three aspects are the focus of the experiments presented in this thesis. To study superconducting islands and readout techniques, we used InAs semiconductor nanowires with an epitaxially grown Al shell. Majorana signatures have already been observed in such nanowires. We addressed quasiparticle dynamics in superconducting islands by measuring the gate-charge modulation of the switching current. We found a consistent 2e-periodic modulation at zero magnetic field, and an exponential decrease of parity lifetime with increasing magnetic field. We explored MBQ readout, using a quantum dot level as a proxy for a Majorana zero mode, and measured its charge hybridization with another dot using gate-based readout. We showed that we can rapidly discriminate between two settings with different tunnel couplings, demonstrating the potential of gate-based readout to measure MBQs. And, using gate-based readout, we could study charge-transfer processes occurring in hybrid structures of superconducting islands coupled to quantum dots. Finally, to find a good material platform for nanowire networks, we characterized two two-dimensional systems. We realized quantum point contacts in InSb, which we used to measure the g-factor anisotropy, and effective electron mass in this system. And, we studied the spin-orbit interaction in InAs/GaSb by extracting the difference in density between electrons with different spin orientations. This thesis finishes with a proposal for a series experiments to realize MBQs. These experiments make use of superconducting islands and the reflectometry setup we developed for gate-based readout.
Strong coupling of semiconductor spin qubits to superconducting microwave resonators was recently demonstrated [X. Mi et al., Nature 555, 599 (2018); A. J. Landig et al., Nature 560, 179 (2018); N. Samkharadze et al., Science 359, 1123 (2018); T. Cubaynes et al., NPJ Quant. Inf. 5, 47 (2019)]. These breakthroughs pave the way for quantum information processing that combines the long coherence times of solid-state spin qubits with the long-distance connectivity, fast control, and fast high-fidelity quantum-non-demolition readout of existing superconducting qubit implementations. Here we theoretically analyze and optimize the dispersive readout of a single spin in a semiconductor double quantum dot (DQD) coupled to a microwave resonator via its electric dipole moment. The strong spin-photon coupling arises from the motion of the electron spin in a local magnetic field gradient. We calculate the signal-to-noise ratio (SNR) of the readout accounting for both Purcell spin relaxation and spin relaxation arising from intrinsic electric noise within the semiconductor. We express the maximum achievable SNR in terms of the cooperativity associated with these two dissipation processes. We find that while the cooperativity increases with the strength of the dipole coupling between the DQD and the resonator, it does not depend on the strength of the magnetic field gradient. We then optimize the SNR as a function of experimentally tunable DQD parameters. We identify wide regions of parameter space where the unwanted backaction of the resonator photons on the qubit is small. Moreover, we find that the coupling of the resonator to other DQD transitions can enhance the SNR by at least a factor of two, a ``straddling'' effect [J. Koch et al., Phys. Rev. A 76, 042319 (2007)] that occurs only at nonzero energy detuning of the DQD double-well potential. We estimate that with current technology, single-shot readout fidelities in the range 82--95% can be achieved within a few $\ensuremath{\mu}\mathrm{s}$ of readout time without requiring the use of Purcell filters.
The need for fast readout to measure the state of a quantum dot device has important applications in the capabilities of using them as a means for quantum information processing. Traditional charge sensors used to readout the charge state of a quantum dot device are very robust and sensitive electrometers that have been in use since the late 1980s. They pose an issue to the future of quantum dots as a viable means of quantum computing, and that is in their slow acquisition times of the charge state of the quantum dot. This rate of measurement means that implementing any quantum error correction scheme becomes very difficult or even unfeasible as the coherence times of these semiconductor systems is short compared to charge sensor’s acquisition times. A possibility to speed up the measurement process of the charge state is possible thanks to the atomic molecular and optical (AMO) physics community.Cavity quantum electrodynamics (CQED) is the study of light-matter interactions when both the light and matter are taken to be quantized. A photon may interact with an atom via a dipole interaction to excite it from its ground state to its excited state, and the reverse can occur where the atom emits a photon and decays from its excited state ii to the ground state. This fundamental interaction which has been extensively studied in the AMO community since the early 1960s had been adopted by the superconducting qubit community to measure the state of their qubits. These superconducting qubits, representing atoms, which are coupled to a resonant structure on chip, which represents the photons that can interact with the artificial atom. Since these systems were not traditional trapped or neutral atoms interacting with a photon via a laser, but instead planar circuit structures, the superconducting qubit community re-coined the term cavity quantum electrodynamics to circuit quantum electrodynamics, which we will refer to as cQED.The quantum dot community adapted these methods of what is known as dispersive readout; a capacitive change of the atomic like system, results in a dispersive shift which then alters the characteristic frequency response of the resonant structure. This has allowed for a new kind of charge sensor by means of measuring the resonators response due to its coupling to a quantum dot system. This can be done with very high frequency microwave circuitry, allowing much faster readout than is capable via traditional charge sensors. Thus, allowing a pathway to implement quantum error correction schemes with reasonable times compared to any dephasing or decoherence times of the semiconductor system. Furthermore, such fast readout allows for feedback protocols to be implemented to the system to correct for certain undesirable effects due to instruments or the system itself. Our work focuses on a limit of this cQED interaction of the quantum dots to a resonant structure allowing us to do fast readout of the quantum dot charge states via a dispersive shift.The work I will demonstrate in this dissertation will be in the efforts of fast readout on the charge occupation of a double quantum dot system which is galvanically coupled to a superconducting microwave resonator. This was done in a Si/SiGe heterostructure system where I designed, simulated, and fabricated the device which was optimized to have a stronger dispersive shift signal due to an enhanced gate lever arm that couples to the resonator. I will discuss our results of attaining a minimum integration time of 34.54 ns for a unity signal to noise ratio. This demonstrates a fast readout system in the community iii which could be extended to allow for even better readout speeds with faster instruments than what were available to me for the experiment. I will further discuss our characterization of the hybrid system and how we extracted a charge noise due to charging events between the two dots in our system up to around 10 kHz. This work demonstrates a robust dispersive readout scheme which helps in the scalability of hybrid superconducting-semiconducting architectures for means of quantum information processing.
The performance of a wide range of quantum computing algorithms and protocols depends critically on the fidelity and speed of the employed qubit readout. Examples include gate sequences benefiting from midcircuit real-time measurement-based feedback, such as qubit initialization, entanglement generation, teleportation, and, perhaps most importantly, quantum error correction. A prominent and widely used readout approach is based on the dispersive interaction of a superconducting qubit strongly coupled to a large-bandwidth readout resonator, frequently combined with a dedicated or shared Purcell filter protecting qubits from decay. By dynamically reducing the qubit-resonator detuning and thus increasing the dispersive shift, we demonstrate a beyond-state-of-the-art two-state-readout error of only 0.25% in 100-ns integration time. Maintaining low-readout-drive strength, we nearly quadruple the signal-to-noise ratio of the readout by doubling the readout-mode line width, which we quantify by considering the hybridization of the readout resonator and its dedicated Purcell filter. We find excellent agreement between our experimental data and our theoretical model. The presented results are expected to further boost the performance of new and existing algorithms and protocols critically depending on high-fidelity fast midcircuit measurements. Published by the American Physical Society 2024