Abstract Hybrid quantum devices, in which disparate quantum elements are combined in order to achieve enhanced functionality, have received much attention in recent years due to their exciting potential to address key problems in quantum information processing, communication, and control. Specifically, significant progress has been made in the field of hybrid mechanical devices, in which a qubit is coupled to a mechanical oscillator. High cooperativity in such devices has been demonstrated with superconducting qubits, and coupling defect qubits to mechanical elements via crystal strain has enabled novel methods of qubit measurement and control. In this paper we demonstrate the fabrication of diamond optomechanical crystals (OMCs) with embedded nitrogen-vacancy (NV) centers, a preliminary step toward reaching the quantum regime with defect qubit hybrid mechanical devices. We measure optical and mechanical resonances of diamond OMCs as well as the spin coherence of single embedded NV centers. We find that the spin has long coherence times T 2 * = 1.5 μ s and T 2 = 72 μ s despite its proximity to nanofabricated surfaces. Finally, we discuss potential improvements of these devices and prospects for future experiments in the quantum regime.
Abstract Hybrid quantum devices, in which disparate quantum elements are combined in order to achieve enhanced functionality, have received much attention in recent years due to their exciting potential to address key problems in quantum information processing, communication, and control. Specifically, significant progress has been made in the field of hybrid mechanical devices, in which a qubit is coupled to a mechanical oscillator. High cooperativity in such devices has been demonstrated with superconducting qubits, and coupling defect qubits to mechanical elements via crystal strain has enabled novel methods of qubit measurement and control. In this paper we demonstrate the fabrication of diamond optomechanical crystals (OMCs) with embedded nitrogen-vacancy (NV) centers, a preliminary step toward reaching the quantum regime with defect qubit hybrid mechanical devices. We measure optical and mechanical resonances of diamond OMCs as well as the spin coherence of single embedded NV centers. We find that the spin has long coherence times T 2 * = 1.5 μ s and T 2 = 72 μ s despite its proximity to nanofabricated surfaces. Finally, we discuss potential improvements of these devices and prospects for future experiments in the quantum regime.
A fully functional quantum computer must contain at least two important components: a quantum memory for storing and manipulating quantum information and a quantum data bus to securely transfer information between quantum memories. Typically, a quantum memory is composed of a matter system, such as an atom or an electron spin, due to their prolonged quantum coherence. Alternatively, a quantum data bus is typically composed of some propagating degree of freedom, such as a photon, which can retain quantum information over long distances. Therefore, a quantum computer will likely be a hybrid quantum device, consisting of two or more disparate quantum systems. However, there must be a reliable and controllable quantum interface between the memory and bus in order to faithfully interconvert quantum information. The current engineering challenge for quantum computers is scaling the device to large numbers of controllable quantum systems, which will ultimately depend on the choice of the quantum elements and interfaces utilized in the device. In this thesis, we present and characterize a hybrid quantum device comprised of single nitrogen-vacancy (NV) centers embedded in a high quality factor diamond mechanical oscillator. The electron spin of the NV center is a leading candidate for the realization of a quantum memory due to its exceptional quantum coherence times. On the other hand, mechanical oscillators are highly sensitive to a wide variety of external forces, and have the potential to serve as a long-range quantum bus between quantum systems of disparate energy scales. These two elements are interfaced through crystal strain generated by vibrations of the mechanical oscillator. Importantly, a strain interface allows for a scalable architecture, and furthermore, opens the door to integration into a larger quantum network through coupling to an optical interface.There are a few important engineering challenges associated with this device. First, there have been no previous demonstrations of a strain-mediated spin-mechanical interface and hence the system is largely uncharacterized. Second, fabricating high quality diamond mechanical oscillators is difficult due to the robust and chemically inert nature of diamond. Finally, engineering highly coherent NV centers with a coherent optical interface in nanostructured diamond remains an outstanding challenge. In this thesis, we theoretically and experimentally address each of these challenges, and show that with future improvements, this device is suitable for future quantum-enabled applications. First, we theoretically and experimentally demonstrate a dynamic, strain-mediated coupling between the spin and orbital degrees of freedom of the NV center and the driven mechanical motion of a single-crystal diamond cantilever. We employ Ramsey interferometry to demonstrate coherent, mechanical driving of the NV spin evolution. Using this interferometry technique, we present the first demonstration of nanoscale strain imaging, and quantitatively characterize the previously unknown spin-strain coupling constants. Next, we use the driven motion of the cantilever to perform deterministic control of the frequency and polarization dependence of the optical transitions of the NV center. Importantly, this experiment constitutes the first demonstration of on-chip control of both the frequency and polarization state of a single photon produced by a quantum emitter. In the final experiment, we use mechanical driving to engineer a series of spin ``clock" states and demonstrate a significant increase in the spin coherence time of the NV center. We conclude this thesis with a theoretical discussion of prospective applications for this device, including generation of non-classical mechanical states and spin-spin entanglement, as well as an evaluation of the current limitations of our devices, including a possible avenues for improvement to reach the regime of strong spin-phonon coupling.
The nitrogen vacancy (NV) center in diamond has in recent years emerged as a promising solid state system for quantum information processing and sensing applications.However, using NV centers to build up quantum networks for these applications faces several challenges, such as the lack of efficient interface between NVs and photons, difficulty of maintaining spin coherence times, and scalable techniques for fabrication of NV-photon networks.This thesis focuses on overcoming these challenges by fabricating diamond devices to improve the collection efficiency of NV photon emission, especially from the zero phonon line (ZPL), while maintaining long spin coherence times after fabrication.After an introduction to the subject matter in Chapter 1, Chapter 2 discusses a fabrication technique to produce vertical membranes out of bulk diamond plates.This work showed that after reactive ion etching, the spin properties of isolated NVs in diamond nanostructures were largely preserved.We also observed increased photoluminescence collection from shallow implanted NV centers in these slabs.In Chapter 3, we describe a versatile nanofabrication method based on re-usable silicon membrane hard masks, patterned using standard lithography and mature silicon processing technology.These masks are transferred precisely onto targeted regions of diamond membranes, where photonic devices can be realized without the need for spin coating, wet etching or electron beam exposure.Chapter 4 describes and demonstrates an alternative technique for fabricating one-dimensional photonic crystal (PC) cavities in single-crystal diamond by a combination of reactive ion etching (RIE) and focused ion beam milling.We compare it to transferred silicon hard mask lithography with RIE.Chapter 5 demonstrate NV-nanocavity systems in the strong Purcell regime with consistently high Q factors while preserving the long spin coherence times of NVs.These systems enable coherent spin control of cavity-coupled semiconductor qubits with coherence times exceeding 200 s -an increase by two orders of magnitude over previously reported optical cavity-coupled solid-state qubits.helped monitor the whole process.Special thanks go to our collaborators from BNL nanofabrication experts, namely to
The nitrogen-vacancy (NV) center is a point defect in the diamond crystal lattice, forming a localized-electron system with unique optical and spin properties. In particular, optical control and read-out of the spin state, combined with long spin coherence times, make it an attractive candidate for both high-sensitivity magnetometry and as a solid-state spin qubit for quantum information processing (QIP). This dissertation documents the design, implementation, and characterization of systems aimed at each of these applications. First, the development of a GaP-on-diamond integrated photonics platform for QIP is presented. This work is motivated in part by the scalability advantages that are inherent to photonic device integration, and more fundamentally by the large potential improvements in performance. Specifically, coupling NV centers to integrated optical resonators should enable orders of magnitude improvement in entanglement generation rate through improved photon collection efficiency. This will be crucial for the development of even small-scale QIP systems, as NV-NV spin entanglement has so far only been demonstrated at rates far below the spin decoherence rate, effectively limiting NV-based QIP to two-qubit systems. Large numbers of integrated optical devices were fabricated, including optical resonators. Passive transmission measurements were performed on hundreds of individual devices, enabling statistical performance metrics and device yields to be extracted for several components. Device-coupled single-photon measurements are also presented, indicating photon collection efficiencies as high as 9%, corresponding to an efficiency-limited entanglement rate far exceeding the best reported spin decoherence rate. These results put the GaP-on-diamond platform in a competitive position relative to other photonic integration efforts for QIP. Next, a magneto-optical microscope for bio-sensing applications is presented. The microscope images photoluminescence emitted from a thin, dense sheet of NV centers within the top 200 nm of a diamond chip. Changes in the photoluminescence associated with the spin population of the defects allow for optically detected magnetic resonance (ODMR), with the resonant frequency depending on the local magnetic field. Two-dimensional images of the magnetic field at the surface of the diamond are thus obtained, with a magnetic field sensitivity of 2.4 μT. The microscope was able to detect magnetic-field disturbances due to the presence of single 19-nm-diameter super-paramagnetic nanoparticles (SPNs) in wide-field ODMR images taken at room temperature. This is the first demonstration of wide-field detection of individual sub-μm magnetic particles under ambient conditions, and should enable a new class of biological imaging and sensing systems based on SPN labels.
Trapping of a nanodiamond/microdiamond containing Nitrogen-Vacancy centers in the vacuum is an ideal platform to develop a hybrid mechanical system. In such a system, the coupling between the Nitrogen-Vacancy centers and the mechanical motion of a trapped diamond provides pathways for generating a quantum superposition state of the mechanical motion with long coherence time. In this work, I demonstrate our preliminary data in the detection of Nitrogen-Vacancy spin signals from trapped diamonds using optical and magneto-gravitational trapping technologies. I compared the advantages and drawbacks of both techniques and improvements need to be made. I also explored the charge dynamics of Nitrogen-Vacancy centers in diamonds under near-IR laser illumination and first demonstrate low energy (0.95 to 1.18 eV or 1050 to 1300 nm) Multi-photon Photoluminescence Excitation (PLE) spectrum of NV centers in a sub-millimeter diamond crystal.
Defect based qubit systems like the nitrogen vacancy center in diamond have recently emerged as promising candidates for quantum technologies due to their combination of long coherence times, room temperature operation, and robust optical interface. In order to realize many of their proposed applications, defect qubits must be incorporated into scalable devices architectures consisting of photonic, mechanical, or electrical degrees of freedom. Despite much recent progress, many challenges remain for diamond growth and device fabrication. As an alternate approach, we engaged in a search for nitrogen vacancy center analogues in alternative materials with the hope of obtaining a greater degree of control over defect and material properties. Ultimately, we discovered that divacancy-related point defects in all three of the most common forms of silicon carbide- termed 4H, 6H, and 3C- act as analogues to the nitrogen vacancy center in diamond. We chose to focus our research primarily on defects in 3C silicon carbide (termed 'Ky5' defects) because of its availability as a single crystal heteroepitaxial thin film grown on silicon, an advantage that greatly facilitates the fabrication of functional devices. We characterized the spin and optical properties of Ky5 defects in thin film geometries and observed many similarities to the nitrogen vacancy center. We performed the first measurements of spin dynamics in 3C silicon carbide and demonstrate coherent control of defect spins up to room temperature and observe coherence times of up to 22 microseconds. To demonstrate their use in real devices, we designed, fabricated, and characterized photonic crystal cavities in 3C silicon carbide thin films with mode volumes of less than (lambda/n)^3 and Q's as high as 1,500 with integrated Ky5 defects. Additionally, we performed simulations and analysis of the fabricated structures using observed structural imperfections to determine that the Q's are likely limited primarily by the non-vertical structure sidewall angle. Despite the modest Q's of these structures, they can be utilized to generate large local field intensities to enhance optical interactions with Ky5 qubit states within the cavities. We accomplish this by performing cavity enhanced photoluminescence excitation spectroscopy on cavity modes tuned to the zero phonon line of the defects and observe large (as high as 30 times) increases in the luminescence and optically detected magnetic resonance signals originating from the defect states and approximately 2x faster rates of ground state spin initialization. In addition, we use these techniques to probe the photoluminescence dynamics of the Ky5 defects' optical pumping cycle, perform excitation wavelength dependent studies of spin and spectral inhomogeneity, and use the small mode volume and narrowband photoluminescence enhancements of the cavities to observe spectrally distinct subensembles of defects with linewidths as narrow as 25 GHz within the inhomogeneously broadened zero phonon line. Although much is still unknown regarding the properties of these defects, they show great promise as a candidate system for defect qubit based quantum devices and technologies.
Point defects in diamond, particularly nitrogen-vacancy (NV) centers, have emerged as powerful tools for a broad range of quantum technologies. These defects are promising candidates for quantum information science, serving as deterministic single-photon sources and solid-state quantum memories. They have also been employed as nanoscale quantum sensors to detect various physical quantities, including magnetic fields, electric fields, and temperature, owing to their long spin coherence time at room temperature. Development of these diamond-based quantum technologies has been rapidly boosted by a recent quantum leap in nanofabrication technologies for high-quality single-crystal diamond. Incorporating these color centers into diamond nanostructures with mature integrated photonics provides a promising route to build scalable and practical systems for quantum applications. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms. Nitrogen-vacancy centers in diamond have emerged as powerful tools for a broad range of quantum technologies. This review discusses recent progress and challenges in the hybrid integration of diamond color centers on cutting-edge photonic platforms.