Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1811.04002 · Physical Review X

Benchmarking Gate Fidelities in a Si / SiGe Two-Qubit Device

Xiao Xue, Thomas F. Watson, Jonas Helsen, Daniel R. Ward, D. E. Savage, M. G. Lagally, S. N. Coppersmith, M. A. Eriksson, Stephanie Wehner, Lieven M. K. Vandersypen

Published Apr 18, 2019• 140 citations
arXivHTMLPDF

Abstract

Two-qubit quantum gates in silicon exhibit 92% fidelity when tested with a new benchmarking protocol, showing both the utility of the protocol and a promising start for developing fault-tolerant quantum computers based on spins in silicon.
DOI
10.1103/physrevx.9.021011

Related papers

Two-qubit silicon quantum processor with operation fidelity exceeding 99%

Adam Mills, Charles R. Guinn, Michael J. Gullans +4 more

Silicon spin qubits satisfy the necessary criteria for quantum information processing. However, a demonstration of high-fidelity state preparation and readout combined with high-fidelity single- and two-qubit gates, all of which must be present for quantum error correction, has been lacking. We use a two-qubit Si/SiGe quantum processor to demonstrate state preparation and readout with fidelity greater than 97%, combined with both single- and two-qubit control fidelities exceeding 99%. The operation of the quantum processor is quantitatively characterized using gate set tomography and randomized benchmarking. Our results highlight the potential of silicon spin qubits to become a dominant technology in the development of intermediate-scale quantum processors.

arXiv:2111.11937•Science Advances•Apr 6, 2022•376 citations

Simultaneous single-qubit driving of semiconductor spin qubits at the fault-tolerant threshold

William I. L. Lawrie, Maximilian Rimbach-Russ, F. van Riggelen +6 more

Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.

arXiv:2109.07837•Nature Communications•Jun 19, 2023•104 citations

Pursuing high-fidelity control of spin qubits in natural Si/SiGe quantum dot

Ning Wang, Shaomin Wang, Run-Ze Zhang +6 more

Electron spins in silicon quantum dots are a promising platform for fault-tolerant quantum computing. Low-frequency noise, including nuclear spin fluctuations and charge noise, is a primary factor limiting gate fidelities. Suppressing this noise is crucial for high-fidelity qubit operations. Here, we report on a two-qubit quantum device in natural silicon with universal qubit control, designed to investigate the upper limits of gate fidelities in a non-purified Si/SiGe quantum dot device. By employing advanced device structures, qubit manipulation techniques, and optimization methods, we have achieved single-qubit gate fidelities exceeding 99% and a two-qubit controlled-Z (CZ) gate fidelity of 91%. Decoupled CZ gates are used to prepare Bell states with an average fidelity of 91%, typically exceeding previously reported values in natural silicon devices. These results underscore that even natural silicon has the potential to achieve high-fidelity gate operations, particularly with further optimization methods to suppress low-frequency noise.

arXiv:2409.09747•Applied Physics Letters•Nov 11, 2024•9 citations

Quantum logic with spin qubits crossing the surface code threshold

Xiao Xue, Maximilian Rimbach-Russ, Nodar Samkharadze +4 more

Abstract High-fidelity control of quantum bits is paramount for the reliable execution of quantum algorithms and for achieving fault tolerance—the ability to correct errors faster than they occur 1 . The central requirement for fault tolerance is expressed in terms of an error threshold. Whereas the actual threshold depends on many details, a common target is the approximately 1% error threshold of the well-known surface code 2,3 . Reaching two-qubit gate fidelities above 99% has been a long-standing major goal for semiconductor spin qubits. These qubits are promising for scaling, as they can leverage advanced semiconductor technology 4 . Here we report a spin-based quantum processor in silicon with single-qubit and two-qubit gate fidelities, all of which are above 99.5%, extracted from gate-set tomography. The average single-qubit gate fidelities remain above 99% when including crosstalk and idling errors on the neighbouring qubit. Using this high-fidelity gate set, we execute the demanding task of calculating molecular ground-state energies using a variational quantum eigensolver algorithm 5 . Having surpassed the 99% barrier for the two-qubit gate fidelity, semiconductor qubits are well positioned on the path to fault tolerance and to possible applications in the era of noisy intermediate-scale quantum devices.

arXiv:2107.00628•Nature•Jan 19, 2022•576 citations

High-fidelity Two and Three Spin Operations in Si with Triple Quantum Dots

Seigo Tarucha

We use Si/SiGe triple quantum dots to operate two and three spin qubits with high fidelities. For the two qubit we speed up the single qubit and exchange control to achieve the fault tolerance threshold fidelity of$> 99$%. For the three qubits we control two exchange couplings to generate a three-spin entangled state.

Technical digest - International Electron Devices Meeting/Technical digest•Dec 11, 2021•1 citation

Simulation of Two-qubit Gate Variability and Fidelity of Spin Qubits Built on Nanosheet Technology

Trung Nguyen, Sarah Dweik, Hiu Yung Wong

Silicon spin qubits are promising for large-scale quantum-computer integration because they can fully leverage the well-developed semiconductor infrastructure. However, the low fidelity of two-qubit entanglement gates remains a key barrier to large-scale integrations. Recent simulations of silicon spin-qubit two-qubit gates have been performed on silicon-on-insulator (SOI) platforms, while nanosheet-based charge-qubit work has been limited to single-qubit operation using a two-dimensional Schrödinger approximation. In this work, we study silicon spin-qubit double quantum dots built on nanosheet technology using the Quantum Technology Computer-Aided Design (QTCAD) simulation suite to run three-dimensional Poisson and Schroedinger solvers, followed by a many-body solver to extract exchange interactions. We evaluate the exchange energy sensitivity to process and bias variations and then use QuTiP to solve the master equation for a two-qubit gate. The results show that millivolt-level bias variations at the plunger and middle barrier gates can reduce the gate fidelity below 99%, a common threshold target for many fault-tolerant quantum-computing algorithms. Gate-referred 1/f charge-noise effects are also analyzed through the resulting coherence time.

quant-pharXiv:2606.32030•Jul 1, 2026
Silicon spin qubits satisfy the necessary criteria for quantum information processing. However, a demonstration of high-fidelity state preparation and readout combined with high-fidelity single- and two-qubit gates, all of which must be present for quantum error correction, has been lacking. We use a two-qubit Si/SiGe quantum processor to demonstrate state preparation and readout with fidelity greater than 97%, combined with both single- and two-qubit control fidelities exceeding 99%. The operation of the quantum processor is quantitatively characterized using gate set tomography and randomized benchmarking. Our results highlight the potential of silicon spin qubits to become a dominant technology in the development of intermediate-scale quantum processors.
Practical Quantum computing hinges on the ability to control large numbers of qubits with high fidelity. Quantum dots define a promising platform due to their compatibility with semiconductor manufacturing. Moreover, high-fidelity operations above 99.9% have been realized with individual qubits, though their performance has been limited to 98.67% when driving two qubits simultaneously. Here we present single-qubit randomized benchmarking in a two-dimensional array of spin qubits, finding native gate fidelities as high as 99.992(1)%. Furthermore, we benchmark single qubit gate performance while simultaneously driving two and four qubits, utilizing a novel benchmarking technique called N-copy randomized benchmarking, designed for simple experimental implementation and accurate simultaneous gate fidelity estimation. We find two- and four-copy randomized benchmarking fidelities of 99.905(8)% and 99.34(4)% respectively, and that next-nearest neighbor pairs are highly robust to cross-talk errors. These characterizations of single-qubit gate quality are crucial for scaling up quantum information technology.
Electron spins in silicon quantum dots are a promising platform for fault-tolerant quantum computing. Low-frequency noise, including nuclear spin fluctuations and charge noise, is a primary factor limiting gate fidelities. Suppressing this noise is crucial for high-fidelity qubit operations. Here, we report on a two-qubit quantum device in natural silicon with universal qubit control, designed to investigate the upper limits of gate fidelities in a non-purified Si/SiGe quantum dot device. By employing advanced device structures, qubit manipulation techniques, and optimization methods, we have achieved single-qubit gate fidelities exceeding 99% and a two-qubit controlled-Z (CZ) gate fidelity of 91%. Decoupled CZ gates are used to prepare Bell states with an average fidelity of 91%, typically exceeding previously reported values in natural silicon devices. These results underscore that even natural silicon has the potential to achieve high-fidelity gate operations, particularly with further optimization methods to suppress low-frequency noise.
Abstract High-fidelity control of quantum bits is paramount for the reliable execution of quantum algorithms and for achieving fault tolerance—the ability to correct errors faster than they occur 1 . The central requirement for fault tolerance is expressed in terms of an error threshold. Whereas the actual threshold depends on many details, a common target is the approximately 1% error threshold of the well-known surface code 2,3 . Reaching two-qubit gate fidelities above 99% has been a long-standing major goal for semiconductor spin qubits. These qubits are promising for scaling, as they can leverage advanced semiconductor technology 4 . Here we report a spin-based quantum processor in silicon with single-qubit and two-qubit gate fidelities, all of which are above 99.5%, extracted from gate-set tomography. The average single-qubit gate fidelities remain above 99% when including crosstalk and idling errors on the neighbouring qubit. Using this high-fidelity gate set, we execute the demanding task of calculating molecular ground-state energies using a variational quantum eigensolver algorithm 5 . Having surpassed the 99% barrier for the two-qubit gate fidelity, semiconductor qubits are well positioned on the path to fault tolerance and to possible applications in the era of noisy intermediate-scale quantum devices.
We use Si/SiGe triple quantum dots to operate two and three spin qubits with high fidelities. For the two qubit we speed up the single qubit and exchange control to achieve the fault tolerance threshold fidelity of>99> 99>99%. For the three qubits we control two exchange couplings to generate a three-spin entangled state.
Silicon spin qubits are promising for large-scale quantum-computer integration because they can fully leverage the well-developed semiconductor infrastructure. However, the low fidelity of two-qubit entanglement gates remains a key barrier to large-scale integrations. Recent simulations of silicon spin-qubit two-qubit gates have been performed on silicon-on-insulator (SOI) platforms, while nanosheet-based charge-qubit work has been limited to single-qubit operation using a two-dimensional Schrödinger approximation. In this work, we study silicon spin-qubit double quantum dots built on nanosheet technology using the Quantum Technology Computer-Aided Design (QTCAD) simulation suite to run three-dimensional Poisson and Schroedinger solvers, followed by a many-body solver to extract exchange interactions. We evaluate the exchange energy sensitivity to process and bias variations and then use QuTiP to solve the master equation for a two-qubit gate. The results show that millivolt-level bias variations at the plunger and middle barrier gates can reduce the gate fidelity below 99%, a common threshold target for many fault-tolerant quantum-computing algorithms. Gate-referred 1/f charge-noise effects are also analyzed through the resulting coherence time.