We use Si/SiGe triple quantum dots to operate two and three spin qubits with high fidelities. For the two qubit we speed up the single qubit and exchange control to achieve the fault tolerance threshold fidelity of$> 99$%. For the three qubits we control two exchange couplings to generate a three-spin entangled state.
We use Si/SiGe triple quantum dots to operate two and three spin qubits with high fidelities. For the two qubit we speed up the single qubit and exchange control to achieve the fault tolerance threshold fidelity of>99%. For the three qubits we control two exchange couplings to generate a three-spin entangled state.
We demonstrate rapid high-fidelity state preparation and measurement in exchange-only Si/SiGe triplequantum-dot qubits.Fast measurement integration (980-ns) and initialization (approximately 300-ns) operations are performed with all-electrical baseband control.We emphasize a leakage-sensitive joint initialization and measurement metric, developed in the context of exchange-only qubits but applicable more broadly, and report an infidelity of 2.5 ± 0.5×10 -3 .This result is enabled by a high-valley-splitting heterostructure, initialization at the two-to three-electron charge boundary, and careful assessment and mitigation of T 1 during spin-to-charge conversion.The ultimate fidelity is limited by a number of comparably important factors and we identify clear paths toward further improved fidelity and speed.Along with an observed single-qubit randomized benchmarking error rate of 1.7 × 10 -3 , this work demonstrates initialization, control, and measurement of Si/SiGe triple-dot qubits at fidelities and durations that are promising for scalable quantum information processing.
Electron spins in silicon quantum dots are a promising platform for fault-tolerant quantum computing. Low-frequency noise, including nuclear spin fluctuations and charge noise, is a primary factor limiting gate fidelities. Suppressing this noise is crucial for high-fidelity qubit operations. Here, we report on a two-qubit quantum device in natural silicon with universal qubit control, designed to investigate the upper limits of gate fidelities in a non-purified Si/SiGe quantum dot device. By employing advanced device structures, qubit manipulation techniques, and optimization methods, we have achieved single-qubit gate fidelities exceeding 99% and a two-qubit controlled-Z (CZ) gate fidelity of 91%. Decoupled CZ gates are used to prepare Bell states with an average fidelity of 91%, typically exceeding previously reported values in natural silicon devices. These results underscore that even natural silicon has the potential to achieve high-fidelity gate operations, particularly with further optimization methods to suppress low-frequency noise.
Motivated by recent experiments of Zajac et al. [Science 359, 439 (2018)], we theoretically describe high-fidelity two-qubit gates using the exchange interaction between the spins in neighboring quantum dots subject to a magnetic field gradient. We use a combination of analytical calculations and numerical simulations to provide the optimal pulse sequences and parameter settings for the gate operation. We present a synchronization method which avoids detrimental spin flips during the gate operation and provide details about phase mismatches accumulated during the two-qubit gates which occur due to residual exchange interaction, nonadiabatic pulses, and off-resonant driving. By adjusting the gate times, synchronizing the resonant and off-resonant transitions, and compensating these phase mismatches by phase control, the overall gate fidelity can be increased significantly.
Abstract Electron spins in semiconductors are promising qubits because their long coherence times enable nearly 10 9 coherent quantum gate operations. However, developing a scalable high-fidelity two-qubit gate remains challenging. Here, we demonstrate an entangling gate between two double-quantum-dot spin qubits in GaAs by using a magnetic field gradient between the two dots in each qubit to suppress decoherence due to charge noise. When the magnetic gradient dominates the voltage-controlled exchange interaction between electrons, qubit coherence times increase by an order of magnitude. Using randomized benchmarking, we measure single-qubit gate fidelities of ~ 99%, and through self-consistent quantum measurement, state, and process tomography, we measure an entangling gate fidelity of 90%. In the future, operating double quantum dot spin qubits with large gradients in nuclear-spin-free materials, such as Si, should enable a two-qubit gate fidelity surpassing the threshold for fault-tolerant quantum information processing.
Implementing high-fidelity two-qubit gates in single-electron spin qubits in silicon double quantum dots is still a major challenge. In this work we employ analytical methods to design control pulses that generate high-fidelity entangling gates for quantum computers based on this platform. Using realistic parameters and initially assuming a noise-free environment, we present simple control pulses that generate cnot, cphase, and cz gates with average fidelities greater than 99.99% and gate times as short as 45 ns. Moreover, using the local invariants of the system's evolution operator, we show that a simple square pulse generates a cnot gate in less than 27 ns and with a fidelity greater than 99.99%. Last, we use the same analytical methods to generate two-qubit gates locally equivalent to CNOT and CZ that are used to implement simple two-piece pulse sequences that produce high-fidelity cnot and cz gates in the presence of low-frequency noise.
The charge and spin degrees of freedom of an electron constitute natural bases for constructing quantum two level systems, or qubits, in semiconductor quantum dots. The quantum dot charge qubit offers a simple architecture and high-speed operation, but generally suffers from fast dephasing due to strong coupling of the environment to the electron’s charge. On the other hand, quantum dot spin qubits have demonstrated long coherence times, but their manipulation is often slower than desired for important future applications. This talk will present experimental progress of a ‘hybrid’ qubit, formed by three electrons in a Si/SiGe double quantum dot, which combines desirable characteristics (speed and coherence) in the past found separately in qubits based on either charge or spin degrees of freedom. Using resonant microwaves, we first discuss qubit operations near the ‘sweet spot’ for charge qubit operation. Along with fast ( >GHz) manipulation rates for any rotation axis on the Bloch sphere, we implement two independent tomographic characterization schemes in the charge qubit regime: traditional quantum process tomography (QPT) and gate set tomography (GST). We also present resonant qubit operations of the hybrid qubit performed on the same device, DC pulsed gate operations of which were recently demonstrated. We demonstrate three-axis control and the implementation of dynamic decoupling pulse sequences. Performing QPT on the hybrid qubit, we show that AC gating yields π rotation process fidelities higher than 93% for X-axis and 96% for Z-axis rotations, which demonstrates efficient quantum control of semiconductor qubits using resonant microwaves. We discuss a path forward for achieving fidelities better than the threshold for quantum error correction using surface codes.