Abstract Fault-tolerant quantum computing requires many qubits with long lifetimes and accurate quantum gate operations. However, external noise limits the computing time and hampers accurate quantum gate operations. Quantum error correction (QEC) codes may extend such limits, but imperfect gate operations during QEC cause errors, which could cancel out QEC. We used density matrix simulations to examine the performance of QEC codes with five qubits. In current quantum devices, less than ten qubits are needed to conduct sufficient gate operations within their lifetime so that it is feasible to implement QEC codes. We analyzed the maximum tolerable error rate and error correction effect of individual QEC codes according to the qubit arrangement and gate accuracy. Assuming a 0.1% gate error probability, a logical ∣ 1 〉 state encoded by a five-qubit QEC code is expected to have a 0.25 higher fidelity than its physical counterpart.
Abstract Fault-tolerant quantum computing requires many qubits with long lifetimes and accurate quantum gate operations. However, external noise limits the computing time and hampers accurate quantum gate operations. Quantum error correction (QEC) codes may extend such limits, but imperfect gate operations during QEC cause errors, which could cancel out QEC. We used density matrix simulations to examine the performance of QEC codes with five qubits. In current quantum devices, less than ten qubits are needed to conduct sufficient gate operations within their lifetime so that it is feasible to implement QEC codes. We analyzed the maximum tolerable error rate and error correction effect of individual QEC codes according to the qubit arrangement and gate accuracy. Assuming a 0.1% gate error probability, a logical ∣ 1 〉 state encoded by a five-qubit QEC code is expected to have a 0.25 higher fidelity than its physical counterpart.
Quantum computers hold the promise to solve some hard problems that are intractable for even the most powerful current supercomputers. One of the most famous examples is Shor's algorithm for factorizing large numbers, which has exponential speedup compared to its best classical counterparts. However, running such an algorithm will require to build a large-scale quantum computer consisting of thousands or even millions of qubits that include quantum error correction (QEC) and fault-tolerant (FT) mechanisms. Quantum computing is already a reality with the so-called Noisy Intermediate-Scale Quantum (NISQ) processors, some of them available in the cloud. Noisy refers to the imperfect control over the qubits and intermediate-scale to the relatively low number of quits (from fifty to a few hundred). Although current and near-term quantum devices will not have enough qubits for implementing large and fully corrected quantum computations, the use of small quantum error correction codes may extend the computation lifetime of NISQ devices. In this context and as a first step, it is important to test and demonstrate the fault-tolerance of these QEC codes. In this thesis, we explore the fault-tolerance of two small quantum correction codes that are good candidates to be applied to NISQ processors, the [[4,2,2]] code and the [[7,1,3]] Steane code. To this purpose, by following the FT criterion prosed by Daniel Gottesman in 2016, we tested both codes using two simulators, the stabilizer formalism simulator that includes quite simple error models and a full density matrix simulator called quantumsim, which includes more realistic noise. The simulations are performed under reasonable noise parameter values. For the [[4,2,2]] code, 235 circuits are tested based on the two simulators. The results show that in the stabilizer formalism simulation, the FT criterion is satised for all circuits, while not fully satisfied in the full density matrix simulation. For the [[7,1,3]] Steane code, we use a parallel-flag error correction implementation which is tested using the full density matrix simulator. Our results show that without applying any QEC cycle, for all circuits (84 circuits for 1 logical qubit simulation and 452 circuits for 2 logical qubits simulation), the error rate of the encoded circuits is lower than the unencoded ones. Adding a quantum error correction (QEC) cycle will in general increase the error rate of the computation.
Study of the Issue Quantum error correction (QEC) is crucial yet incurs significant qubit overhead costs. The current QEC codes lack sufficient efficiency for near-term devices. The current generation of NISQ devices, which often rely on delicate nanostructured qubit architectures, is prone to noise, decoherence, and gate faults, which severely limit their computing capability and scalability. While traditional quantum error correction codes, such as the surface code, are theoretically resilient, they often require significant qubit overhead and complex management systems that exceed the hardware capabilities of NISQ-era devices. This raises the question of whether new, resource-efficient QEC strategies or hybrid error mitigation approaches can be tailored to the limits of nanostructured NISQ designs. This document examines the constraints of existing quantum error correction (QEC) codes, which are crucial for preserving the fidelity of quantum computations yet require substantial qubit resources. This study examines the shortcomings of current Quantum Error Correction (QEC) codes in relation to Noisy Intermediate-Scale Quantum (NISQ) devices and explores alternative strategies to create more efficient, low-overhead QEC frameworks appropriate for imminent quantum technologies.
Fault-tolerant protocol assumes the application of error correction after every quantum gate. However, correcting errors is costly in terms of time and number of qubits. Here we demonstrate that quantum error correction (QEC) can be applied significantly less often with only a minimal loss of fidelity. This is done by simulating the implementation of 50 encoded, single-qubit, quantum gates within the [[7,1,3]] QEC code in a noisy, nonequiprobable Pauli error environment with QEC being applied at different intervals. We find that applying QEC after every gate is rarely optimal and even applying QEC only once after all 50 gates sacrifices only a slight amount of fidelity with the benefit of 50-fold saving of resources. In addition, we find that in cases where bit-flip errors are dominant, it is best not to apply QEC at all.
Logical qubits can be protected from decoherence by performing quantum error-correction (QEC) cycles repeatedly. Algorithms for fault-tolerant QEC must be compiled to the specific hardware platform under consideration in order to practically realize a quantum memory that operates for in principle arbitrary long times. All circuit components must be assumed as noisy unless specific assumptions about the form of the noise are made. Modern QEC schemes are challenging to implement experimentally in physical architectures where in-sequence measurements and feed forward of classical information cannot be reliably executed fast enough or even at all. Here we provide a novel scheme to perform QEC cycles without the need of measuring qubits that is fully fault-tolerant with respect to all components used in the circuit. Our scheme can be used for any low-distance CSS code since its only requirement towards the underlying code is a transversal gate. Similarly to Steane-type EC, we coherently copy errors to a logical auxiliary qubit but then apply a coherent feedback operation from the auxiliary system to the logical data qubit. The logical auxiliary qubit is prepared fault tolerantly without measurements, too. We benchmark logical failure rates of the scheme in comparison to a flag-qubit-based EC cycle. We map out a parameter region where our scheme is feasible and estimate physical error rates necessary to achieve the break-even point of beneficial QEC with our scheme. We outline how our scheme could be implemented in ion traps and with neutral atoms in a tweezer array. For recently demonstrated capabilities of atom shuttling and native multiatom Rydberg gates, we achieve moderate circuit depths and beneficial performance of our scheme while not breaking fault tolerance. These results thereby enable practical fault-tolerant QEC in hardware architectures that do not support midcircuit measurements. Published by the American Physical Society 2024
Experimental realization of stabilizer-based quantum error correction (QEC) codes that would yield superior logical qubit performance is one of the formidable task for state-of-the-art quantum processors. A major obstacle toward realizing this goal is the large footprint of QEC codes, even those with a small distance. We propose a circuit based on the minimal distance-3 QEC code, which requires only five data qubits and five ancilla qubits, connected in a ring with iswap gates implemented between neighboring qubits. Using a density-matrix simulation, we show that, thanks to its smaller footprint, the proposed code has a lower logical error rate than surface-17 for similar physical error rates. We also estimate the performance of a neural-network-based error decoder, which can be trained to accommodate the error statistics of a specific quantum processor by training on experimental data.
Quantum error correction (QEC) represents the cornerstone technology for realizing fault-tolerant quantum computing, addressing the fundamental challenge of quantum state decoherence in noisy intermediate-scale quantum (NISQ) devices. This comprehensive review examines recent advances in QEC implementations from 2020-2024, spanning theoretical foundations to practical hardware demonstrations. We analyze the evolution from pioneering stabilizer codes to modern topological approaches, with particular emphasis on surface codes and low-density parity-check (LDPC) codes that have demonstrated below-threshold error correction in superconducting and trapped-ion systems. The paper provides a comparative analysis of classical and machine learning-based decoder algorithms, evaluating their performance through complexity analysis and threshold comparisons in real-time error correction scenarios. Through examination of breakthrough experiments by Google, IBM, Quantinuum, and emerging platforms, we assess the current state of fault-tolerant quantum computing and identify critical engineering challenges including correlated noise models, cryogenic control systems, and scalable logical gate implementations. Our quantitative analysis reveals that while significant progress has been made toward practical fault-tolerance thresholds, achieving the resource efficiency and reliability required for large-scale quantum computation remains challenging. We provide detailed resource estimates for key applications including Shor's algorithm and optimization problems, along with analysis of industry roadmaps toward thousand-logical-qubit systems. This review serves as a comprehensive guide for researchers and engineers working toward the next generation of fault-tolerant quantum computers, with particular focus on information-theoretic perspectives relevant to quantum information entropy and syndrome processing.