Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1808.04666 · Physical Review A

Adiabatic quantum simulations with driven superconducting qubits

Marco Roth, Nikolaj Moll, Gian Salis, Marc Ganzhorn, Daniel J. Egger, Stefan Filipp, Sebastian Schmidt

Published Feb 21, 2019• 16 citations
arXivHTMLPDF

Abstract

We propose a quantum simulator based on driven superconducting qubits where the interactions are generated parametrically by a bichromatic magnetic flux modulation of a tunable bus element. Using a time-dependent Schrieffer-Wolff transformation, we analytically derive a multiqubit Hamiltonian which features independently tunable $XX$- and $YY$-type interactions as well as local bias fields over a large parameter range. We demonstrate the adiabatic simulation of the ground state of a hydrogen molecule using two superconducting qubits and one tunable bus element. The time required to reach chemical accuracy lies in the few microsecond range. Therefore, the proposed adiabatic protocol could be implemented using currently available superconducting circuits. Further applications of this technique may also be found in the simulation of interacting spin systems.

DOI
10.1103/physreva.99.022323

Related papers

Demonstration of Tunable Three-Body Interactions between Superconducting Qubits

Tim Menke, William P. Banner, Thomas R. Bergamaschi +16 more

Nonpairwise multiqubit interactions present a useful resource for quantum information processors. Their implementation would facilitate more efficient quantum simulations of molecules and combinatorial optimization problems, and they could simplify error suppression and error correction schemes. Here, we present a superconducting circuit architecture in which a coupling module mediates two-local and three-local interactions between three flux qubits by design. The system Hamiltonian is estimated via multiqubit pulse sequences that implement Ramsey-type interferometry between all neighboring excitation manifolds in the system. The three-local interaction is coherently tunable over several MHz via the coupler flux biases and can be turned off, which is important for applications in quantum annealing, analog quantum simulation, and gate-model quantum computation.

arXiv:2205.04542•Physical Review Letters•Nov 21, 2022•40 citations

Quantum Coherent Tunable Coupling of Superconducting Qubits

A. O. Niskanen, K. Harrabi, Fumiki Yoshihara +3 more

To do large-scale quantum information processing, it is necessary to control the interactions between individual qubits while retaining quantum coherence. To this end, superconducting circuits allow for a high degree of flexibility. We report on the time-domain tunable coupling of optimally biased superconducting flux qubits. By modulating the nonlinear inductance of an additional coupling element, we parametrically induced a two-qubit transition that was otherwise forbidden. We observed an on/off coupling ratio of 19 and were able to demonstrate a simple quantum protocol.

Science•May 3, 2007•424 citations

All-to-all connectivity via adiabatic ZZ interactions in a superconducting flux qubit processor

Elena Lupo, Nguyen H. Le, Eran Ginossar +1 more

Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below $10^{-4}$ over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.

arXiv:2611.12576•Nov 9, 2026•0 citations

Controlled-Controlled-Phase Gates for Superconducting Qubits Mediated by a Shared Tunable Coupler

Niklas J. Glaser, Federico Roy, Stefan Filipp

Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.

arXiv:2206.12392•Physical Review Applied•Apr 3, 2023•31 citations

Time-resolved tomography of a driven adiabatic quantum simulation

Gian Salis, Nikolaj Moll, Marco Roth +2 more

A typical goal of a quantum simulation is to find the energy levels and eigenstates of a given Hamiltonian. This can be realized by adiabatically varying the system control parameters to steer an initial eigenstate into the eigenstate of the target Hamiltonian. Such an adiabatic quantum simulation is demonstrated by directly implementing a controllable and smoothly varying Hamiltonian in the rotating frame of two superconducting qubits, including longitudinal and transverse fields and iswap-type two-qubit interactions. The evolution of each eigenstate is tracked using time-resolved state tomography. The energy gaps between instantaneous eigenstates are chosen such that, depending on the energy transition rate, either diabatic or adiabatic passages are observed in the measured energies and correlators. Errors in the obtained energy values induced by finite ${T}_{1}$ and ${T}_{2}$ times of the qubits are mitigated by extrapolation to short protocol times.

arXiv:2001.05243•Physical Review A•Dec 17, 2020•3 citations

Analysis of a parametrically driven exchange-type gate and a two-photon excitation gate between superconducting qubits

Marco Roth, Marc Ganzhorn, Nikolaj Moll +3 more

A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two or more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we theoretically and experimentally study a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swapping excitations between the qubits (iswap) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bswap). We find that the bswap gate is generally slower than the more commonly used iswap gate, but features favorable scalability properties with less severe frequency-crowding effects, which typically degrade the fidelity in multiqubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.

arXiv:1708.02090•Physical Review A•Dec 20, 2017•97 citations
We propose a quantum simulator based on driven superconducting qubits where the interactions are generated parametrically by a bichromatic magnetic flux modulation of a tunable bus element. Using a time-dependent Schrieffer-Wolff transformation, we analytically derive a multiqubit Hamiltonian which features independently tunable XXXXXX- and YYYYYY-type interactions as well as local bias fields over a large parameter range. We demonstrate the adiabatic simulation of the ground state of a hydrogen molecule using two superconducting qubits and one tunable bus element. The time required to reach chemical accuracy lies in the few microsecond range. Therefore, the proposed adiabatic protocol could be implemented using currently available superconducting circuits. Further applications of this technique may also be found in the simulation of interacting spin systems.
Nonpairwise multiqubit interactions present a useful resource for quantum information processors. Their implementation would facilitate more efficient quantum simulations of molecules and combinatorial optimization problems, and they could simplify error suppression and error correction schemes. Here, we present a superconducting circuit architecture in which a coupling module mediates two-local and three-local interactions between three flux qubits by design. The system Hamiltonian is estimated via multiqubit pulse sequences that implement Ramsey-type interferometry between all neighboring excitation manifolds in the system. The three-local interaction is coherently tunable over several MHz via the coupler flux biases and can be turned off, which is important for applications in quantum annealing, analog quantum simulation, and gate-model quantum computation.
To do large-scale quantum information processing, it is necessary to control the interactions between individual qubits while retaining quantum coherence. To this end, superconducting circuits allow for a high degree of flexibility. We report on the time-domain tunable coupling of optimally biased superconducting flux qubits. By modulating the nonlinear inductance of an additional coupling element, we parametrically induced a two-qubit transition that was otherwise forbidden. We observed an on/off coupling ratio of 19 and were able to demonstrate a simple quantum protocol.
Scalable superconducting quantum processors would benefit from high qubit connectivity, yet existing architectures connect neighbouring qubits via tunable couplers, which introduce substantial wiring and control overhead. Here, we propose a baseband-driven adiabatic ZZ gate that entangles any selected pair in a register of flux qubits coupled via a common cavity. The qubits stay dc-biased at their flux sweet spot. Strong drives applied selectively through local flux lines, at frequencies far below the qubit transitions, adiabatically tilt the quantization axes and generate an effective longitudinal ZZ interaction. The strength of the coupling is tunable and controlled by the amplitudes and relative phase of the drives rather than by any resonance condition. Numerical simulations give coherent gate errors below 10−410^{-4}10−4 over broad ranges of drive frequency, with comparable fidelities for two simultaneous gates in a four-qubit register. The protocol is robust against frequency fluctuations and remains effective even when many qubits are coupled to the cavity.
Applications for noisy intermediate-scale quantum computing devices rely on the efficient entanglement of many qubits to reach a potential quantum advantage. Although entanglement is typically generated using two-qubit gates, direct control of strong multiqubit interactions can improve the efficiency of the process. Here, we investigate a system of three superconducting transmon-type qubits coupled via a single flux-tunable coupler. Tuning the frequency of the coupler by adiabatic flux pulses enables us to control the conditional energy shifts between the qubits and directly realize multiqubit interactions. To accurately adjust the resulting controlled relative phases, we describe a gate protocol involving refocusing pulses and adjustable interaction times. This enables the implementation of the full family of pairwise controlled-phase and controlled-controlled-phase gates. Numerical simulations result in fidelities around 99% and gate times below 300 ns using currently achievable system parameters and decoherence rates.
A typical goal of a quantum simulation is to find the energy levels and eigenstates of a given Hamiltonian. This can be realized by adiabatically varying the system control parameters to steer an initial eigenstate into the eigenstate of the target Hamiltonian. Such an adiabatic quantum simulation is demonstrated by directly implementing a controllable and smoothly varying Hamiltonian in the rotating frame of two superconducting qubits, including longitudinal and transverse fields and iswap-type two-qubit interactions. The evolution of each eigenstate is tracked using time-resolved state tomography. The energy gaps between instantaneous eigenstates are chosen such that, depending on the energy transition rate, either diabatic or adiabatic passages are observed in the measured energies and correlators. Errors in the obtained energy values induced by finite T1{T}_{1}T1​ and T2{T}_{2}T2​ times of the qubits are mitigated by extrapolation to short protocol times.
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two or more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we theoretically and experimentally study a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swapping excitations between the qubits (iswap) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bswap). We find that the bswap gate is generally slower than the more commonly used iswap gate, but features favorable scalability properties with less severe frequency-crowding effects, which typically degrade the fidelity in multiqubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.