Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.07814 · Physical Review Letters

Quantum Measurement Cooling

Lorenzo Buffoni, Andrea Solfanelli, Paola Verrucchi, Alessandro Cuccoli, Michele Campisi

Published Feb 21, 2019• 186 citations
arXivHTMLPDF

Abstract

Invasiveness of quantum measurements is a genuinely quantum mechanical feature that is not necessarily detrimental: Here we show how quantum measurements can be used to fuel a cooling engine. We illustrate quantum measurement cooling (QMC) by means of a prototypical two-stroke two-qubit engine which interacts with a measurement apparatus and two heat reservoirs at different temperatures. We show that feedback control is not necessary for operation while entanglement must be present in the measurement projectors. We quantify the probability that QMC occurs when the measurement basis is chosen randomly, and find that it can be very large as compared to the probability of extracting energy (heat engine operation), while remaining always smaller than the most useless operation, namely, dumping heat in both baths. These results show that QMC can be very robust to experimental noise. A possible low-temperature solid-state implementation that integrates circuit QED technology with circuit quantum thermodynamics technology is presented.

DOI
10.1103/physrevlett.122.070603

Related papers

Optical simulation of a quantum cooling engine powered by entangled measurements

Ning-Ning Wang, Huan Cao, Chao Zhang +5 more

Traditional refrigeration is driven either by external forces or by the information-feedback mechanism. Surprisingly, quantum measurement and collapse, typically viewed as detrimental, can also power a quantum cooling engine without requiring any feedback mechanism. In this work, we perform a proof-of-principle demonstration of quantum measurement cooling (QMC) powered by entangled measurements using a highly controllable linear optical simulator. The simulator can simulate qubits with different energy-level spacings and their thermalizing processes at different temperatures, and also allows for arbitrary projections of two qubits at different energy levels. We show the effect of changes in energy levels and measurement bases on the cooling process and demonstrate the robustness of QMC. These results reveal the special role of entangled measurements in quantum thermodynamics, indicate that quantum measurement is not always detrimental but can be a valuable thermodynamic resource. Our setup also offers a highly controllable simulation platform for multiqubit quantum engines.

arXiv:2302.09948•Optica•Jun 20, 2024•2 citations

Squeezing-Fueled Quantum Otto Engine via Measurement-Induced Cooling: The Two-Qubit Quantum Rabi Model

S R Rathnakaran, Asoka Biswas

We investigate a quantum Otto engine (QOE) constructed from the two-qubit quantum Rabi model, operating within a cavity quantum electrodynamics (QED) architecture. The engine operates with two qubits as the working substance and a single non-Markovian hot thermal bath, modeled via the hierarchical equations of motion (HEOM) formalism. In place of a conventional cold thermal reservoir, the cooling stroke is realized through a projective measurement protocol on the cavity mode, which acts as an ancillary subsystem and effectively mimics a cold bath for the qubit working medium via measurement back-action. A squeezing drive applied to the cavity mode serves as a quantum fuel. We demonstrate that cavity squeezing systematically enhances both the power output and operational efficiency of the engine - the work extracted per unit of heat drawn from the hot bath-driving it above the standard quantum Otto limit. In the limit-cycle regime, the efficiency, while remaining above the Otto bound throughout, asymptotically converges to it from above. This identifies squeezing as a controllable quantum resource for thermodynamic optimization. Our results reveal that the interplay between qubit-cavity coupling, measurement-induced cooling, and non-equilibrium squeezing gives rise to a multi-resource thermodynamic architecture with performance characteristics inaccessible to conventional two-bath quantum Otto engines, thereby providing a concrete route toward experimentally realizable quantum heat engines in cavity QED platforms.

quant-pharXiv:2608.02521•Quantum Science and Technology•Aug 4, 2026•0 citations

Experimental investigation of a quantum heat engine powered by generalized measurements

Vinicius F. Lisboa, Pedro R. Dieguez, J. R. Guimarães +2 more

Generalized measurements may allow the control of its back-action on the quantum system by interpolating from a very weak to strong projective action. Such a measurement can fuel a quantum heat engine or extract work depending on the system-meter interaction. Here, we performed a proof-of-concept experiment using nuclear magnetic resonance techniques to investigate a spin quantum heat engine driven by nonselective generalized (weak) measurements without feedback control. Our prototype of a quantum thermal device operates with a measurement protocol and a single heat bath. The protocol is composed of two nonselective measurement channels with variable measurement strengths; one dedicated to fueling the device (analogous to a hot heat source) and the other committed to work extraction. The experimental results highlight that this kind of quantum thermal device can reach unit efficiency with maximum extracted power by fine-tuning of the measurement strengths.

arXiv:2204.01041•Physical Review A•Aug 29, 2022•47 citations

Impact of Information on Quantum Heat Engines

Lindsay Bassman Oftelie, Michele Campisi

The emerging field of quantum thermodynamics is beginning to reveal the intriguing role that information can play in quantum thermal engines. Information enters as a resource when considering feedback-controlled thermal machines. While both a general theory of quantum feedback control as well as specific examples of quantum feedback-controlled engines have been presented, still lacking is a general framework for such machines. Here, we present a framework for a generic, two-stroke quantum heat engine interacting with $N$ thermal baths and Maxwell's demon. The demon performs projective measurements on the engine working substance, the outcome of which is recorded in a classical memory, embedded in its own thermal bath. To perform feedback control, the demon enacts unitary operations on the working substance, conditioned on the recorded outcome. By considering the compound machine-memory as a hybrid (classical-quantum) standard thermal machine interacting with $N+1$ thermal baths, our framework puts the working substance and memory on equal footing, thereby enabling a comprehensible resolution to Maxwell's paradox and elucidating the intricate manner in which information impacts the performance of quantum engines. We illustrate the application of our framework with a two-qubit engine. A remarkable observation is that more information does not necessarily result in better thermodynamic performance: sometimes knowing less is better.

quant-pharXiv:2512.13371•Physical Review A•Dec 16, 2025•1 citation

Two-stroke Quantum Measurement Heat Engine

Mohammad Sahnawaz Alam, B. Prasanna Venkatesh

We propose and analyze the theoretical model for a two-stroke quantum heat engine with one of the heat baths replaced by a non-selective quantum measurement. We show that the engine's invariant reference state depends on whether the cycle is monitored or unmonitored via diagnostic measurements to determine the engine's work output. We explore in detail the average work output and fluctuations of the proposed heat engine for the monitored and unmonitored cases. We also identify unitary work strokes for which the invariant states can support coherences in the energy basis leading to differing predictions for the average energy change during the unitary work strokes and the average work from the standard two-projective measurement approach.

arXiv:2201.06303•Jan 17, 2022•13 citations

Revealing the fuel of a quantum continuous measurement-based refrigerator

Cyril Elouard, Sreenath K. Manikandan, Andrew N. Jordan +1 more

While quantum measurements have been shown to constitute a resource for operating quantum thermal machines, the nature of the energy exchanges involved in the interaction between system and measuring apparatus is still under debate. In this work, we show that a microscopic model of the apparatus is necessary to unambiguously determine whether quantum measurements provide energy in the form of heat or work. We illustrate this result by considering a measurement-based refrigerator, made of a double quantum dot embedded in a two-terminal device, with the charge of one of the dots being continuously monitored. Tuning the parameters of the measurement device interpolates between heat- and work-fueled regimes with very different thermodynamic efficiency. Notably, we demonstrate a trade-off between a maximal thermodynamic efficiency when the measurement-based refrigerator is fueled by heat and a maximal measurement efficiency quantified by the signal-to-noise ratio in the work-fueled regime. Our analysis sheds light on the nature of the energy exchanges occurring during a quantum measurement, paving the way for energy optimization in quantum protocols and quantum machines.

arXiv:2502.10349•Physical review. E•Jan 6, 2026•11 citations
Invasiveness of quantum measurements is a genuinely quantum mechanical feature that is not necessarily detrimental: Here we show how quantum measurements can be used to fuel a cooling engine. We illustrate quantum measurement cooling (QMC) by means of a prototypical two-stroke two-qubit engine which interacts with a measurement apparatus and two heat reservoirs at different temperatures. We show that feedback control is not necessary for operation while entanglement must be present in the measurement projectors. We quantify the probability that QMC occurs when the measurement basis is chosen randomly, and find that it can be very large as compared to the probability of extracting energy (heat engine operation), while remaining always smaller than the most useless operation, namely, dumping heat in both baths. These results show that QMC can be very robust to experimental noise. A possible low-temperature solid-state implementation that integrates circuit QED technology with circuit quantum thermodynamics technology is presented.
Traditional refrigeration is driven either by external forces or by the information-feedback mechanism. Surprisingly, quantum measurement and collapse, typically viewed as detrimental, can also power a quantum cooling engine without requiring any feedback mechanism. In this work, we perform a proof-of-principle demonstration of quantum measurement cooling (QMC) powered by entangled measurements using a highly controllable linear optical simulator. The simulator can simulate qubits with different energy-level spacings and their thermalizing processes at different temperatures, and also allows for arbitrary projections of two qubits at different energy levels. We show the effect of changes in energy levels and measurement bases on the cooling process and demonstrate the robustness of QMC. These results reveal the special role of entangled measurements in quantum thermodynamics, indicate that quantum measurement is not always detrimental but can be a valuable thermodynamic resource. Our setup also offers a highly controllable simulation platform for multiqubit quantum engines.
We investigate a quantum Otto engine (QOE) constructed from the two-qubit quantum Rabi model, operating within a cavity quantum electrodynamics (QED) architecture. The engine operates with two qubits as the working substance and a single non-Markovian hot thermal bath, modeled via the hierarchical equations of motion (HEOM) formalism. In place of a conventional cold thermal reservoir, the cooling stroke is realized through a projective measurement protocol on the cavity mode, which acts as an ancillary subsystem and effectively mimics a cold bath for the qubit working medium via measurement back-action. A squeezing drive applied to the cavity mode serves as a quantum fuel. We demonstrate that cavity squeezing systematically enhances both the power output and operational efficiency of the engine - the work extracted per unit of heat drawn from the hot bath-driving it above the standard quantum Otto limit. In the limit-cycle regime, the efficiency, while remaining above the Otto bound throughout, asymptotically converges to it from above. This identifies squeezing as a controllable quantum resource for thermodynamic optimization. Our results reveal that the interplay between qubit-cavity coupling, measurement-induced cooling, and non-equilibrium squeezing gives rise to a multi-resource thermodynamic architecture with performance characteristics inaccessible to conventional two-bath quantum Otto engines, thereby providing a concrete route toward experimentally realizable quantum heat engines in cavity QED platforms.
Generalized measurements may allow the control of its back-action on the quantum system by interpolating from a very weak to strong projective action. Such a measurement can fuel a quantum heat engine or extract work depending on the system-meter interaction. Here, we performed a proof-of-concept experiment using nuclear magnetic resonance techniques to investigate a spin quantum heat engine driven by nonselective generalized (weak) measurements without feedback control. Our prototype of a quantum thermal device operates with a measurement protocol and a single heat bath. The protocol is composed of two nonselective measurement channels with variable measurement strengths; one dedicated to fueling the device (analogous to a hot heat source) and the other committed to work extraction. The experimental results highlight that this kind of quantum thermal device can reach unit efficiency with maximum extracted power by fine-tuning of the measurement strengths.
The emerging field of quantum thermodynamics is beginning to reveal the intriguing role that information can play in quantum thermal engines. Information enters as a resource when considering feedback-controlled thermal machines. While both a general theory of quantum feedback control as well as specific examples of quantum feedback-controlled engines have been presented, still lacking is a general framework for such machines. Here, we present a framework for a generic, two-stroke quantum heat engine interacting with NNN thermal baths and Maxwell's demon. The demon performs projective measurements on the engine working substance, the outcome of which is recorded in a classical memory, embedded in its own thermal bath. To perform feedback control, the demon enacts unitary operations on the working substance, conditioned on the recorded outcome. By considering the compound machine-memory as a hybrid (classical-quantum) standard thermal machine interacting with N+1N+1N+1 thermal baths, our framework puts the working substance and memory on equal footing, thereby enabling a comprehensible resolution to Maxwell's paradox and elucidating the intricate manner in which information impacts the performance of quantum engines. We illustrate the application of our framework with a two-qubit engine. A remarkable observation is that more information does not necessarily result in better thermodynamic performance: sometimes knowing less is better.
We propose and analyze the theoretical model for a two-stroke quantum heat engine with one of the heat baths replaced by a non-selective quantum measurement. We show that the engine's invariant reference state depends on whether the cycle is monitored or unmonitored via diagnostic measurements to determine the engine's work output. We explore in detail the average work output and fluctuations of the proposed heat engine for the monitored and unmonitored cases. We also identify unitary work strokes for which the invariant states can support coherences in the energy basis leading to differing predictions for the average energy change during the unitary work strokes and the average work from the standard two-projective measurement approach.
While quantum measurements have been shown to constitute a resource for operating quantum thermal machines, the nature of the energy exchanges involved in the interaction between system and measuring apparatus is still under debate. In this work, we show that a microscopic model of the apparatus is necessary to unambiguously determine whether quantum measurements provide energy in the form of heat or work. We illustrate this result by considering a measurement-based refrigerator, made of a double quantum dot embedded in a two-terminal device, with the charge of one of the dots being continuously monitored. Tuning the parameters of the measurement device interpolates between heat- and work-fueled regimes with very different thermodynamic efficiency. Notably, we demonstrate a trade-off between a maximal thermodynamic efficiency when the measurement-based refrigerator is fueled by heat and a maximal measurement efficiency quantified by the signal-to-noise ratio in the work-fueled regime. Our analysis sheds light on the nature of the energy exchanges occurring during a quantum measurement, paving the way for energy optimization in quantum protocols and quantum machines.