Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.10349 · Physical review. E

Revealing the fuel of a quantum continuous measurement-based refrigerator

Cyril Elouard, Sreenath K. Manikandan, Andrew N. Jordan, Géraldine Haack

Published Jan 6, 2026• 11 citations
arXivHTMLPDF

Abstract

While quantum measurements have been shown to constitute a resource for operating quantum thermal machines, the nature of the energy exchanges involved in the interaction between system and measuring apparatus is still under debate. In this work, we show that a microscopic model of the apparatus is necessary to unambiguously determine whether quantum measurements provide energy in the form of heat or work. We illustrate this result by considering a measurement-based refrigerator, made of a double quantum dot embedded in a two-terminal device, with the charge of one of the dots being continuously monitored. Tuning the parameters of the measurement device interpolates between heat- and work-fueled regimes with very different thermodynamic efficiency. Notably, we demonstrate a trade-off between a maximal thermodynamic efficiency when the measurement-based refrigerator is fueled by heat and a maximal measurement efficiency quantified by the signal-to-noise ratio in the work-fueled regime. Our analysis sheds light on the nature of the energy exchanges occurring during a quantum measurement, paving the way for energy optimization in quantum protocols and quantum machines.

DOI
10.1103/hpgc-nsmr

Related papers

Continuous measurement boosted adiabatic quantum thermal machines

Bibek Bhandari, Andrew N. Jordan

We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.

arXiv:2112.03971•Physical Review Research•Aug 5, 2022•32 citations

A thermodynamically consistent approach to the energy costs of quantum measurements

Camille Lombard Latune, Cyril Elouard

Considering a general microscopic model for a quantum measuring apparatus comprising a quantum probe coupled to a thermal bath, we analyze the energetic resources necessary for the realization of a quantum measurement, which includes the creation of system-apparatus correlations, the irreversible transition to a statistical mixture of definite outcomes, and the apparatus resetting. Crucially, we do not resort to another quantum measurement to capture the emergence of objective measurement results, but rather exploit the properties of the thermal bath which redundantly records the measurement result in its degrees of freedom, naturally implementing the paradigm of quantum Darwinism. In practice, this model allows us to perform a quantitative thermodynamic analysis of the measurement process. From the expression of the second law, we show how the minimal required work depends on the energy variation of the system being measured plus information-theoretic quantities characterizing the performance of the measurement – efficiency and completeness. Additionally, we show that it is possible to perform a thermodynamically reversible measurement, thus reaching the minimal work expenditure, and provide the corresponding protocol. Finally, for finite-time measurement protocols, we illustrate the increasing work cost induced by rising entropy production inherent in finite-time thermodynamic processes. This highlights an emerging trade-off between velocity of the measurement and work cost, on top of a trade-off between efficiency of the measurement and work cost. We apply those findings to bring new insights in the thermodynamic balance of the measurement-powered quantum engines.

arXiv:2402.16037•Quantum•Jan 28, 2025•19 citations

Thermodynamics of a continuously monitored double-quantum-dot heat engine in the repeated interactions framework

Laetitia P. Bettmann, Michael J. Kewming, John Goold

Understanding the thermodynamic role of measurement in quantum mechanical systems is a burgeoning field of study. In this article, we study a double quantum dot (DQD) connected to two macroscopic fermionic thermal reservoirs. We assume that the DQD is continuously monitored by a quantum point contact (QPC), which serves as a charge detector. Starting from a minimalist microscopic model for the QPC and reservoirs, we show that the local master equation of the DQD can alternatively be derived in the framework of repeated interactions and that this framework guarantees a thermodynamically consistent description of the DQD and its environment (including the QPC). We analyze the effect of the measurement strength and identify a regime in which particle transport through the DQD is both assisted and stabilized by dephasing. We also find that in this regime the entropic cost of driving the particle current with fixed relative fluctuations through the DQD is reduced. We thus conclude that under continuous measurement a more constant particle current may be achieved at a fixed entropic cost.

arXiv:2212.10193•Physical review. E•Apr 6, 2023•19 citations

The importance of being measurement

Esteban Calzetta

Energy exchanges under form of heat is neither the most natural or efficient way to operate an engine in the quantum realm. Recently there have been in the literature several proposals for "quantum measurement engines" where energy is fed into the machine by operations which otherwise would be conducive to quantum measurements on the working substance (henceforth "the system"). In the analysis of the working of these devices, oftentimes it is assumed that the only effect of measurement is to turn the state of the system from whatever prior state to an eigenstate of the measured property, and energy exchanges are determined therefrom. This ignores the intricacies of the quantum measurement process. We propose a simple model of a quantum measurement engine where the measurement process may be analyzed in detail, and therefore energy exchanges, and limitations on their duration, may be traced more fully.

arXiv:1909.13178•Sep 29, 2019•0 citations

Nonselective generalized measurements as a resource for quantum thermal machines in a double quantum dot

Bruno Carvalho, Jonas F. G. Santos, Moises Rojas

We investigated quantum thermal machines powered by sequential nonselective generalized measurements, taking a double quantum dot with coherent interdot tunneling as a working substance. In this platform, the competition between detuning and tunneling hybridizes the localized states and modifies the energetic response of the cycle, allowing us to analyze measurement-driven thermodynamics beyond simple diagonal qubit models. We formulate a three-stroke cycle composed of thermalization with a single reservoir and two generalized measurement channels, and derive the corresponding internal-energy and entropy variations in order to identify the operational regimes of the device. Depending on the measurement parameters, the system can operate as a heat engine, accelerator, heater, or refrigerator. We show that the introduction of tunneling not only reshapes the boundaries between these modes, but also generates refrigeration configurations that are absent in the purely detuned model. In addition, the performance maps reveal that temperature, detuning, and tunneling amplitude jointly control the most favorable regions for work extraction and cooling. Our results demonstrate that coherent interdot coupling acts as an important resource for optimizing measurement-powered quantum thermal machines and highlight double quantum dots as a promising setting for experimentally relevant implementations of measurement-assisted thermodynamic devices.

quant-pharXiv:2605.07124•May 11, 2026•0 citations

Measurement-Based Quantum Thermal Machines with Feedback Control

Bibek Bhandari, Robert Czupryniak, Paolo Andrea Erdman +1 more

We investigated coupled-qubit-based thermal machines powered by quantum measurements and feedback. We considered two different versions of the machine: (1) a quantum Maxwell's demon, where the coupled-qubit system is connected to a detachable single shared bath, and (2) a measurement-assisted refrigerator, where the coupled-qubit system is in contact with a hot and cold bath. In the quantum Maxwell's demon case, we discuss both discrete and continuous measurements. We found that the power output from a single qubit-based device can be improved by coupling it to the second qubit. We further found that the simultaneous measurement of both qubits can produce higher net heat extraction compared to two setups operated in parallel where only single-qubit measurements are performed. In the refrigerator case, we used continuous measurement and unitary operations to power the coupled-qubit-based refrigerator. We found that the cooling power of a refrigerator operated with swap operations can be enhanced by performing suitable measurements.

arXiv:2212.01502•Entropy•Jan 20, 2023•23 citations
While quantum measurements have been shown to constitute a resource for operating quantum thermal machines, the nature of the energy exchanges involved in the interaction between system and measuring apparatus is still under debate. In this work, we show that a microscopic model of the apparatus is necessary to unambiguously determine whether quantum measurements provide energy in the form of heat or work. We illustrate this result by considering a measurement-based refrigerator, made of a double quantum dot embedded in a two-terminal device, with the charge of one of the dots being continuously monitored. Tuning the parameters of the measurement device interpolates between heat- and work-fueled regimes with very different thermodynamic efficiency. Notably, we demonstrate a trade-off between a maximal thermodynamic efficiency when the measurement-based refrigerator is fueled by heat and a maximal measurement efficiency quantified by the signal-to-noise ratio in the work-fueled regime. Our analysis sheds light on the nature of the energy exchanges occurring during a quantum measurement, paving the way for energy optimization in quantum protocols and quantum machines.
We present a unified approach to study continuous measurement-based quantum thermal machines in static as well as adiabatically driven systems. We investigate both steady-state and transient dynamics for the time-independent case. In the adiabatically driven case, we show how measurement-based thermodynamic quantities can be attributed geometric characteristics. We also provide the appropriate definition for heat transfer and dissipation owing to continuous measurement in the presence and absence of adiabatic driving. We illustrate the aforementioned ideas and study the phenomenon of refrigeration in two different paradigmatic examples: a coupled quantum dot and a coupled qubit system, both undergoing continuous measurement and slow driving. In the time-independent case, we show that quantum coherence can improve the cooling power of measurement-based quantum refrigerators. Exclusively for the case of coupled qubits, we consider linear as well as nonlinear system-bath couplings. We observe that nonlinear coupling produces cooling effects in certain regimes where otherwise heating is expected. In the adiabatically driven case, we observe that quantum measurement can provide significant boost to the power of adiabatic quantum refrigerators. We also observe that the obtained boost can be larger than the sum of power due to individual effects. The measurement-based refrigerators can have similar or better coefficient of performance in the driven case compared to the static one in the regime where heat extraction is maximum. Our results have potential significance for future application in devices ranging from measurement-based quantum thermal machines to refrigeration in quantum processing networks.
Considering a general microscopic model for a quantum measuring apparatus comprising a quantum probe coupled to a thermal bath, we analyze the energetic resources necessary for the realization of a quantum measurement, which includes the creation of system-apparatus correlations, the irreversible transition to a statistical mixture of definite outcomes, and the apparatus resetting. Crucially, we do not resort to another quantum measurement to capture the emergence of objective measurement results, but rather exploit the properties of the thermal bath which redundantly records the measurement result in its degrees of freedom, naturally implementing the paradigm of quantum Darwinism. In practice, this model allows us to perform a quantitative thermodynamic analysis of the measurement process. From the expression of the second law, we show how the minimal required work depends on the energy variation of the system being measured plus information-theoretic quantities characterizing the performance of the measurement – efficiency and completeness. Additionally, we show that it is possible to perform a thermodynamically reversible measurement, thus reaching the minimal work expenditure, and provide the corresponding protocol. Finally, for finite-time measurement protocols, we illustrate the increasing work cost induced by rising entropy production inherent in finite-time thermodynamic processes. This highlights an emerging trade-off between velocity of the measurement and work cost, on top of a trade-off between efficiency of the measurement and work cost. We apply those findings to bring new insights in the thermodynamic balance of the measurement-powered quantum engines.
Understanding the thermodynamic role of measurement in quantum mechanical systems is a burgeoning field of study. In this article, we study a double quantum dot (DQD) connected to two macroscopic fermionic thermal reservoirs. We assume that the DQD is continuously monitored by a quantum point contact (QPC), which serves as a charge detector. Starting from a minimalist microscopic model for the QPC and reservoirs, we show that the local master equation of the DQD can alternatively be derived in the framework of repeated interactions and that this framework guarantees a thermodynamically consistent description of the DQD and its environment (including the QPC). We analyze the effect of the measurement strength and identify a regime in which particle transport through the DQD is both assisted and stabilized by dephasing. We also find that in this regime the entropic cost of driving the particle current with fixed relative fluctuations through the DQD is reduced. We thus conclude that under continuous measurement a more constant particle current may be achieved at a fixed entropic cost.
Energy exchanges under form of heat is neither the most natural or efficient way to operate an engine in the quantum realm. Recently there have been in the literature several proposals for "quantum measurement engines" where energy is fed into the machine by operations which otherwise would be conducive to quantum measurements on the working substance (henceforth "the system"). In the analysis of the working of these devices, oftentimes it is assumed that the only effect of measurement is to turn the state of the system from whatever prior state to an eigenstate of the measured property, and energy exchanges are determined therefrom. This ignores the intricacies of the quantum measurement process. We propose a simple model of a quantum measurement engine where the measurement process may be analyzed in detail, and therefore energy exchanges, and limitations on their duration, may be traced more fully.
We investigated quantum thermal machines powered by sequential nonselective generalized measurements, taking a double quantum dot with coherent interdot tunneling as a working substance. In this platform, the competition between detuning and tunneling hybridizes the localized states and modifies the energetic response of the cycle, allowing us to analyze measurement-driven thermodynamics beyond simple diagonal qubit models. We formulate a three-stroke cycle composed of thermalization with a single reservoir and two generalized measurement channels, and derive the corresponding internal-energy and entropy variations in order to identify the operational regimes of the device. Depending on the measurement parameters, the system can operate as a heat engine, accelerator, heater, or refrigerator. We show that the introduction of tunneling not only reshapes the boundaries between these modes, but also generates refrigeration configurations that are absent in the purely detuned model. In addition, the performance maps reveal that temperature, detuning, and tunneling amplitude jointly control the most favorable regions for work extraction and cooling. Our results demonstrate that coherent interdot coupling acts as an important resource for optimizing measurement-powered quantum thermal machines and highlight double quantum dots as a promising setting for experimentally relevant implementations of measurement-assisted thermodynamic devices.
We investigated coupled-qubit-based thermal machines powered by quantum measurements and feedback. We considered two different versions of the machine: (1) a quantum Maxwell's demon, where the coupled-qubit system is connected to a detachable single shared bath, and (2) a measurement-assisted refrigerator, where the coupled-qubit system is in contact with a hot and cold bath. In the quantum Maxwell's demon case, we discuss both discrete and continuous measurements. We found that the power output from a single qubit-based device can be improved by coupling it to the second qubit. We further found that the simultaneous measurement of both qubits can produce higher net heat extraction compared to two setups operated in parallel where only single-qubit measurements are performed. In the refrigerator case, we used continuous measurement and unitary operations to power the coupled-qubit-based refrigerator. We found that the cooling power of a refrigerator operated with swap operations can be enhanced by performing suitable measurements.