Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1806.03071

Single Photon Source Driver Designed in ASIC

Feng, Bo, Futian Liang, Xinzhe Wang, Chenxi Zhu, Yulong Zhu, Ge Jin

Published Jun 8, 2018• 0 citations
arXivHTMLPDF

Abstract

The single photon source is an important part of the quantum key distribution (QKD) system. At present, the single photon source is large in size and complex in structure for a lot of discrete components which are used. The miniaturization of the photon source is the tendency of the QKD system. We integrate all laser driver electronic module into one single ASIC chip, which can be used to drive the 1550nm DFB laser in random pulse mode and it can greatly reduce the volume of the single photon source. We present the design of the chip named LSD2018 and simulation results before the tape-out. The LSD2018 is fabricated with a 130 nm CMOS process and consists of a discriminator, an adjustable pulse generator, a bandgap reference, an SPI bus, and an amplitude-adjustable current pulse driver. The electronic random pulse from the driver can go 20mA to 120mA in amplitude and 400ps to 4ns in pulse width. The parameters can be set by an SPI bus.

DOI
10.48550/arxiv.1806.03071

Related papers

An ASIC for Discriminating Single Photon Detector Signal of High-Speed Quantum Key Distribution System

Yulong Zhu, Futian Liang, Xinzhe Wang +3 more

An ASIC is presented in this paper for discriminating signal from single photon detector (SPD) of high-speed quantum key distribution (QKD) system. The circuit is designed in 130 nm CMOS process. It receives and discriminates a small voltage pulse from a SPD, coinciding with a trigger signal and outputs the effective signal to next stage of QKD system. The pulse width of the voltage signal from SPD is less than 400 ps. The circuit mainly consists of bandgap reference, high speed comparator, delay chain and current mode logic (CML) driver. It should operate at a speed of 1.25 GHz. This work integrate all the front-end electronics for SPD into a chip. The area, stray capacitance and power consumption of the whole circuit are reduced. And then the whole receiver of QKD system can be integrated into a chip to improve performance.

IEEE International Conference on ASIC (ASICON)•Oct 1, 2019•0 citations

A laser source driver with adjustable amplitude and pulse-width in 130-nm CMOS technology for quantum key distribution experiments

Bo Feng, Futian Liang, Xinzhe Wang +3 more

We present a laser source driver using a 130-nm complementary metal oxide semiconductor technology, named quantum laser source driver 2018 (QLSD2018). QLSD2018 drives the optical source with a current pulse signal, and the output of QLSD2018 has an adjustable pulse-width from 300 ps to 3.8 ns and an adjustable amplitude up to 70 mA. The data rate is up to 625 Mb/s, and the extinction ratio of the optical source (the 1550-nm distributed feedback laser or the 850-nm vertical-cavity surface-emitting laser) driven by QLSD2018 can reach 26 dB. The test results indicate that QLSD2018 can be used in quantum key distribution experiments. Using QLSD2018 on the transmitter side can significantly simplify the peripheral circuit of the optical source.

Review of Scientific Instruments•Jun 1, 2019•8 citations

Chip-Based Electronic System for Quantum Key Distribution

Siyuan Zhang, Wei Mao, Shaobo Luo +1 more

Quantum Key Distribution (QKD) has garnered significant attention due to its unconditional security based on the fundamental principles of quantum mechanics. While QKD has been demonstrated by various groups and commercial QKD products are available, the development of a fully chip-based QKD system, aimed at reducing costs, size, and power consumption, remains a significant technological challenge. Most researchers focus on the optical aspects, leaving the integration of the electronic components largely unexplored. In this paper, we present the design of a fully integrated electrical control chip for QKD applications. The chip, fabricated using 28 nm CMOS technology, comprises five main modules: an ARM processor for digital signal processing, delay cells for timing synchronization, ADC for sampling analog signals from monitors, OPAMP for signal amplification, and DAC for generating the required voltage for phase or intensity modulators. According to the simulations, the minimum delay is 11ps, the open-loop gain of the operational amplifier is 86.2 dB, the sampling rate of the ADC reaches 50 MHz, and the DAC achieves a high rate of 100 MHz. To the best of our knowledge, this marks the first design and evaluation of a fully integrated driver chip for QKD, holding the potential to significantly enhance QKD system performance. Thus, we believe our work could inspire future investigations toward the development of more efficient and reliable QKD systems.

Entropy•Apr 29, 2024•0 citations

Photonic integrated quantum key distribution receiver for multiple users

Lingwen Kong, Zhihao Li, Congxiu Li +6 more

Integrated photonics has the advantages of miniaturization, low cost, and CMOS compatibility, and it provides a stable, highly integrated, and practical platform for quantum key distribution (QKD). While photonic integration of optical components has greatly reduced the overall cost of QKD systems, single-photon detectors (SPDs) have become the most expensive part of a practical QKD system. In order to circumvent this obstacle and make full use of SPDs, we have designed and fabricated a QKD receiver chip for multiple users. Our chip is based on a time-division multiplexing technique and makes use of a single set of SPDs to support up to four users' QKD. Our proof-of-principle chip-based QKD system is capable of producing an average secret key rate of 13.68 kbps for four users with a quantum bit error rate (QBER) as low as 0.51% over a simulated distance of 20 km in fiber. Our result clearly demonstrates the feasibility of multiplexing SPDs for setting QKD channels with different users using photonic integrated chip and may find applications in the commercialization of quantum communication technology.

arXiv:2007.03427•Optics Express•May 30, 2020•20 citations

Faint-Pulse Single-Photon Source Triggered by FPGA

Mohamed Saleh, Salem F. Hegazy

Among various implementations of single-photon sources, faint-pulse single-photon sources provide a simple and practical approach based on attenuated coherent laser pulses. This work presents an experimental realization of a faint-pulse single-photon source using a 785-nm Grating Stabilized Laser Diode system, driven by a laser diode controller and modulated by a Field Programmable Gate Array (FPGA). The system's performance was evaluated by analyzing the photon detection rate as a function of pulse width and driving current. Results indicated a linear relationship between the single-photon detection rate and pulse width and an exponential dependence on driving current. The system achieved a photon emission probability of 10% per pulse, aligning with the requirements of practical quantum key distribution systems. This implementation demonstrates a cost-effective, scalable, and accessible platform for single-photon experiments, providing a foundation for future implementations of quantum communication protocols.

National Radio Science Conference•May 6, 2025•1 citation

Design and Development of Weak Coherent Pulse Source for Quantum Key Distribution System

Adarsh Jain, Parthkumar V. Sakhiya, Rajesh Kumar Bahl

Single photon source is indispensable for realization of photon based quantum communication technologies such as quantum key distribution (QKD). Weak coherent pulse source is a practical, efficient and robust solution to generate stream of single photons, probabilistically. In this paper, a methodology for design and development of weak coherent pulse (WCP) source with high count rate of upto 10 Mcps is proposed and implemented. The generation of optical pulses with narrow pulse width and repetition rate of up to 100 MHz is achieved by developing a miniaturized pulse laser module. The weak coherent pulses are generated by heavily attenuating the laser pulses so as to reach the mean photon no. per pulse, μ, close to 0.1. WCP source performance in terms of mean photon number, second order coherence and photon count rate is also investigated. The measured g(2)[0] of ~0.98 shows that the developed WCP source has a very good quality.

IEEE International Conference on Electronics, Computing and Communication Technologies (CONECCT)•Jul 1, 2020•11 citations
The single photon source is an important part of the quantum key distribution (QKD) system. At present, the single photon source is large in size and complex in structure for a lot of discrete components which are used. The miniaturization of the photon source is the tendency of the QKD system. We integrate all laser driver electronic module into one single ASIC chip, which can be used to drive the 1550nm DFB laser in random pulse mode and it can greatly reduce the volume of the single photon source. We present the design of the chip named LSD2018 and simulation results before the tape-out. The LSD2018 is fabricated with a 130 nm CMOS process and consists of a discriminator, an adjustable pulse generator, a bandgap reference, an SPI bus, and an amplitude-adjustable current pulse driver. The electronic random pulse from the driver can go 20mA to 120mA in amplitude and 400ps to 4ns in pulse width. The parameters can be set by an SPI bus.
An ASIC is presented in this paper for discriminating signal from single photon detector (SPD) of high-speed quantum key distribution (QKD) system. The circuit is designed in 130 nm CMOS process. It receives and discriminates a small voltage pulse from a SPD, coinciding with a trigger signal and outputs the effective signal to next stage of QKD system. The pulse width of the voltage signal from SPD is less than 400 ps. The circuit mainly consists of bandgap reference, high speed comparator, delay chain and current mode logic (CML) driver. It should operate at a speed of 1.25 GHz. This work integrate all the front-end electronics for SPD into a chip. The area, stray capacitance and power consumption of the whole circuit are reduced. And then the whole receiver of QKD system can be integrated into a chip to improve performance.
We present a laser source driver using a 130-nm complementary metal oxide semiconductor technology, named quantum laser source driver 2018 (QLSD2018). QLSD2018 drives the optical source with a current pulse signal, and the output of QLSD2018 has an adjustable pulse-width from 300 ps to 3.8 ns and an adjustable amplitude up to 70 mA. The data rate is up to 625 Mb/s, and the extinction ratio of the optical source (the 1550-nm distributed feedback laser or the 850-nm vertical-cavity surface-emitting laser) driven by QLSD2018 can reach 26 dB. The test results indicate that QLSD2018 can be used in quantum key distribution experiments. Using QLSD2018 on the transmitter side can significantly simplify the peripheral circuit of the optical source.
Quantum Key Distribution (QKD) has garnered significant attention due to its unconditional security based on the fundamental principles of quantum mechanics. While QKD has been demonstrated by various groups and commercial QKD products are available, the development of a fully chip-based QKD system, aimed at reducing costs, size, and power consumption, remains a significant technological challenge. Most researchers focus on the optical aspects, leaving the integration of the electronic components largely unexplored. In this paper, we present the design of a fully integrated electrical control chip for QKD applications. The chip, fabricated using 28 nm CMOS technology, comprises five main modules: an ARM processor for digital signal processing, delay cells for timing synchronization, ADC for sampling analog signals from monitors, OPAMP for signal amplification, and DAC for generating the required voltage for phase or intensity modulators. According to the simulations, the minimum delay is 11ps, the open-loop gain of the operational amplifier is 86.2 dB, the sampling rate of the ADC reaches 50 MHz, and the DAC achieves a high rate of 100 MHz. To the best of our knowledge, this marks the first design and evaluation of a fully integrated driver chip for QKD, holding the potential to significantly enhance QKD system performance. Thus, we believe our work could inspire future investigations toward the development of more efficient and reliable QKD systems.
Integrated photonics has the advantages of miniaturization, low cost, and CMOS compatibility, and it provides a stable, highly integrated, and practical platform for quantum key distribution (QKD). While photonic integration of optical components has greatly reduced the overall cost of QKD systems, single-photon detectors (SPDs) have become the most expensive part of a practical QKD system. In order to circumvent this obstacle and make full use of SPDs, we have designed and fabricated a QKD receiver chip for multiple users. Our chip is based on a time-division multiplexing technique and makes use of a single set of SPDs to support up to four users' QKD. Our proof-of-principle chip-based QKD system is capable of producing an average secret key rate of 13.68 kbps for four users with a quantum bit error rate (QBER) as low as 0.51% over a simulated distance of 20 km in fiber. Our result clearly demonstrates the feasibility of multiplexing SPDs for setting QKD channels with different users using photonic integrated chip and may find applications in the commercialization of quantum communication technology.
Among various implementations of single-photon sources, faint-pulse single-photon sources provide a simple and practical approach based on attenuated coherent laser pulses. This work presents an experimental realization of a faint-pulse single-photon source using a 785-nm Grating Stabilized Laser Diode system, driven by a laser diode controller and modulated by a Field Programmable Gate Array (FPGA). The system's performance was evaluated by analyzing the photon detection rate as a function of pulse width and driving current. Results indicated a linear relationship between the single-photon detection rate and pulse width and an exponential dependence on driving current. The system achieved a photon emission probability of 10% per pulse, aligning with the requirements of practical quantum key distribution systems. This implementation demonstrates a cost-effective, scalable, and accessible platform for single-photon experiments, providing a foundation for future implementations of quantum communication protocols.
Single photon source is indispensable for realization of photon based quantum communication technologies such as quantum key distribution (QKD). Weak coherent pulse source is a practical, efficient and robust solution to generate stream of single photons, probabilistically. In this paper, a methodology for design and development of weak coherent pulse (WCP) source with high count rate of upto 10 Mcps is proposed and implemented. The generation of optical pulses with narrow pulse width and repetition rate of up to 100 MHz is achieved by developing a miniaturized pulse laser module. The weak coherent pulses are generated by heavily attenuating the laser pulses so as to reach the mean photon no. per pulse, μ, close to 0.1. WCP source performance in terms of mean photon number, second order coherence and photon count rate is also investigated. The measured g(2)[0] of ~0.98 shows that the developed WCP source has a very good quality.