Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1802.07323 · Physical Review Applied

Parametric amplification and squeezing with an ac- and dc-voltage biased superconducting junction

Udson C. Mendes, S. Jézouin, P. Joyez, Bertrand Reulet, Alexandre Blais, F. Portier, Christophe Mora, Carles Altimiras

Published Mar 14, 2019• 20 citations
arXivHTMLPDF

Abstract

In the quest to realize a quantum computer, physicists are dealing with signals that can be as weak as a single microwave photon. To detect such signals with sufficient quantum efficiency to implement $e.g.$ quantum error correction, they must be amplified within the cryostat, and the amplifier itself must be a quantum device. To this end, the authors present a broadband, nearly quantum-limited parametric amplifier based on the tunneling of quasiparticles in a superconducting junction. This development may allow the generation of microwave continuous-variable cluster states, and is expected to have great impact on quantum information science.

DOI
10.1103/physrevapplied.11.034035

Related papers

DC-powered broadband quantum-limited microwave amplifier

N. Nehra, N. Bourlet, A. H. Esmaeili +7 more

Fast, high-fidelity, single-shot readout of superconducting qubits in quantum processors demands quantum-limited amplifiers to preserve the optimal signal-to-noise ratio. Typically, quantum-limited amplification is achieved with parametric down-conversion of a strong pump tone, which imposes significant hardware overhead and severely limits scalability. Here, we demonstrate the first DC-powered broadband amplifier operating within 0.2 photons of the quantum limit. Our impedance-engineered Inelastic Cooper-pair Tunneling Amplifier (ICTA)-a voltage-biased SQUID in which Cooper pairs tunnel inelastically by emitting signal-idler photon pairs-operates in reflection, delivering 13 dB of average gain across a 3.5 GHz bandwidth in a single stage. Semiclassical simulations accurately predict the gain and saturation power, enabling further design improvements. By eliminating the pump-tone infrastructure, the broadband ICTA promises to dramatically reduce the hardware complexity of quantum-limited amplification in superconducting quantum processors.

quant-pharXiv:2512.19902•Physical Review Applied•Dec 24, 2025•2 citations

Three-wave mixing of microwave photons with Josephson junctions and resonators

Emmanuel Flurin, Nicolas Roch, Philippe Campagne-Ibarcq +3 more

Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and present results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.

•Mar 19, 2012•0 citations

A near–quantum-limited Josephson traveling-wave parametric amplifier

Chris Macklin, Kevin P. O’Brien, David J. Hover +5 more

Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.

Science•Sep 3, 2015•875 citations

Three-wave mixing in the GHz range with Josephson junctions and resonators

Nicolas Roch, Emmanuel Flurin, F. Mallet +2 more

Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and show preliminary results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.

•Feb 20, 2012•0 citations

Selective single- and double-mode quantum-limited amplifier

Abdul Mohamed, Elham Zohari, Jarryd J. Pla +2 more

A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.

arXiv:2311.11496•Physical Review Applied•Jun 24, 2024•8 citations

Microstrip Superconducting Quantum Interference Devices for Quantum Information Science

De Feo, P Michael

Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.

•Jan 1, 2012•0 citations
In the quest to realize a quantum computer, physicists are dealing with signals that can be as weak as a single microwave photon. To detect such signals with sufficient quantum efficiency to implement e.g.e.g.e.g. quantum error correction, they must be amplified within the cryostat, and the amplifier itself must be a quantum device. To this end, the authors present a broadband, nearly quantum-limited parametric amplifier based on the tunneling of quasiparticles in a superconducting junction. This development may allow the generation of microwave continuous-variable cluster states, and is expected to have great impact on quantum information science.
Fast, high-fidelity, single-shot readout of superconducting qubits in quantum processors demands quantum-limited amplifiers to preserve the optimal signal-to-noise ratio. Typically, quantum-limited amplification is achieved with parametric down-conversion of a strong pump tone, which imposes significant hardware overhead and severely limits scalability. Here, we demonstrate the first DC-powered broadband amplifier operating within 0.2 photons of the quantum limit. Our impedance-engineered Inelastic Cooper-pair Tunneling Amplifier (ICTA)-a voltage-biased SQUID in which Cooper pairs tunnel inelastically by emitting signal-idler photon pairs-operates in reflection, delivering 13 dB of average gain across a 3.5 GHz bandwidth in a single stage. Semiclassical simulations accurately predict the gain and saturation power, enabling further design improvements. By eliminating the pump-tone infrastructure, the broadband ICTA promises to dramatically reduce the hardware complexity of quantum-limited amplification in superconducting quantum processors.
Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and present results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.
Detecting single-photon level signals—carriers of both classical and quantum information—is particularly challenging for low-energy microwave frequency excitations. Here we introduce a superconducting amplifier based on a Josephson junction transmission line. Unlike current standing-wave parametric amplifiers, this traveling wave architecture robustly achieves high gain over a bandwidth of several gigahertz with sufficient dynamic range to read out 20 superconducting qubits. To achieve this performance, we introduce a subwavelength resonant phase-matching technique that enables the creation of nonlinear microwave devices with unique dispersion relations. We benchmark the amplifier with weak measurements, obtaining a high quantum efficiency of 75% (70% including noise added by amplifiers following the Josephson amplifier). With a flexible design based on compact lumped elements, this Josephson amplifier has broad applicability to microwave metrology and quantum optics.
Three-wave mixing devices, i.e. non-linear circuits converting power among three microwave signals, are key elements of analog information processing in the microwave domain. However, they are based on dissipative components such as semiconductor diodes, or SIS tunnel junctions biased near the superconducting gap. The loss of signal limits their operation and also introduces noise above the minimum required by quantum mechanics. By using Josephson junctions and superconducting resonators, we've been able to build such a quantum device. In its amplification mode, this device can be used as a preamplifier in many experiments where a few photon wide microwave signals must be measured by commercial instruments, which are sensitive to powers several orders of magnitude larger. The price to pay for this amplification is the necessary degradation of information. Indeed, an extension of the no-cloning theorem imposes that a linear phase preserving amplifier adds at least half a quantum of noise to the signal. By amplifying the finite frequency noise emitted by an NIN tunnel junction, we demonstrated that the total measurement chain adds less than 2.3 quanta to this limit thanks to our device. The operating principle of this device is based on Josephson parametric amplification. I will explain this mechanism and show preliminary results which illustrate that it can generate quantum correlated pairs of spatially separated photons with different wavelengths known as two-mode squeezed states. This experiment exploits the tunability of our device and the ease-of-use inherent to micro-wave circuits to perform a quantum optics experiment demonstrating this entanglement.
A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.
Quantum-limited amplification in the microwave frequency range is of both practical and fundamental importance. The weak signals corresponding to single microwave photons require substantial amplification to resolve. When probing quantum excitations of the electromagnetic field, the substantial noise produced by standard amplifiers dominates the signal, therefore, several averages must be accumulated to achieve even a modest signal-to-noise ratio. Even worse, the back-action on the system due to amplifier noise can hasten the decay of the quantum state. In recent years, low-noise microwave-frequency amplification has been advancing rapidly and one field that would benefit greatly from this is circuit quantum electrodynamics (cQED). The development of circuit quantum electrodynamics---which implements techniques of quantum optics at microwave frequencies---has led to revolutionary progress in the field of quantum information science. cQED employs quantum bits (qubits) and superconducting microwave resonators in place of the atoms and cavities used in quantum optics permitting preparation and control of low energy photon states in macroscopic superconducting circuits at millikelvin temperatures. We have developed a microstrip superconducting quantum interference device (SQUID) amplifier (MSA) to provide the first stage of amplification for these systems. Employing sub-micron Josephson tunnel junctions for enhanced gain, these MSAs operate at microwave frequencies and are optimized to perform with near quantum-limited noise characteristics. Our MSA is utilized as the first stage of amplification to probe the dynamics of a SQUID oscillator. The SQUID oscillator is a flux-tunable microwave resonator formed by a capacitively shunted dc SQUID. Josephson plasma oscillations are induced by pulsed microwave excitations at the resonant frequency of the oscillator. Once pulsed, decaying plasma oscillations are observed in the time domain. By measuring with pulse amplitudes approaching the critical current of the SQUID, it is possible to probe the free evolution of a highly nonlinear oscillator.