Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1710.05301 · Physical Review A

Controlling stray electric fields on an atom chip for experiments on Rydberg atoms

D. Davtyan, Shimon Machluf, Maarten L. Soudijn, Julian B. Naber, N. J. van Druten, H. B. van Linden van den Heuvell, R. J. C. Spreeuw

Published Feb 22, 2018• 13 citations
arXivHTMLPDF

Abstract

Experiments handling Rydberg atoms near surfaces must necessarily deal with the high sensitivity of Rydberg atoms to (stray) electric fields that typically emanate from adsorbates on the surface. We demonstrate a method to modify and reduce the stray electric field by changing the adsorbate distribution. We use one of the Rydberg excitation lasers to locally affect the adsorbed dipole distribution. By adjusting the averaged exposure time we change the strength (with the minimal value less than $0.2\phantom{\rule{0.28em}{0ex}}\mathrm{V}/\mathrm{cm}$ at $78\phantom{\rule{0.28em}{0ex}}\ensuremath{\mu}\mathrm{m}$ from the chip) and even the sign of the perpendicular field component. This technique is a useful tool for experiments handling Rydberg atoms near surfaces, including atom chips.

DOI
10.1103/physreva.97.023418

Related papers

Spatially resolved excitation of Rydberg atoms and surface effects on an atom chip

Atreju Tauschinsky, Rutger M. T. Thijssen, S. Whitlock +2 more

We demonstrate spatially resolved, coherent excitation of Rydberg atoms on an atom chip. Electromagnetically induced transparency (EIT) is used to investigate the properties of the Rydberg atoms near the gold-coated chip surface. We measure distance-dependent shifts ($~$$10$ MHz) of the Rydberg energy levels caused by a spatially inhomogeneous electric field. The measured field strength and distance dependence is in agreement with a simple model for the electric field produced by a localized patch of Rb adsorbates deposited on the chip surface during experiments. The EIT resonances remain narrow ($<4$ MHz) and the observed widths are independent of atom-surface distance down to $~$$20$ $\ensuremath{\mu}$m, indicating relatively long lifetime of the Rydberg states. Our results open the way to studies of dipolar physics, collective excitations, quantum metrology, and quantum information processing involving interacting Rydberg excited atoms on atom chips.

arXiv:1004.3230•Physical Review A•Jun 10, 2010•131 citations

Adsorbate Electric Fields on a Cryogenic Atom Chip

K. S. Chan, M. Siercke, Christoph Hufnagel +1 more

We investigate the behavior of electric fields originating from adsorbates deposited on a cryogenic atom chip as it is cooled from room temperature to cryogenic temperature. Using Rydberg electromagnetically induced transparency, we measure the field strength versus distance from a 1 mm square of yttrium barium copper oxide (YBCO) patterned onto a yttria stabilized zirconia chip substrate. We find a localized and stable dipole field at room temperature and attribute it to a saturated layer of chemically adsorbed rubidium atoms on the YBCO. As the chip is cooled towards 83 K we observe a change in sign of the electric field as well as a transition from a localized to a delocalized dipole density. We relate these changes to the onset of physisorption on the chip surface when the van der Waals attraction overcomes the thermal desorption mechanisms. Our findings suggest that through careful selection of substrate materials, it may be possible to reduce the electric fields caused by atomic adsorption on chips, opening up experiments to controlled Rydberg-surface coupling schemes.

arXiv:1312.5868•Physical Review Letters•Jan 14, 2014•40 citations

Adsorbate dynamics on a silica-coated gold surface measured by Rydberg Stark spectroscopy

Julian B. Naber, Shimon Machluf, Lara Torralbo-Campo +4 more

Trapping a Rydberg atom close to a surface is an important step towards the realisation of many proposals for quantum information processing or hybrid quantum systems. One of the challenges in these experiments is posed by the electric field emanating from contaminations on the surface. Here we report on measurements of an electric field created by 87 Rb atoms adsorbed on a 25 nm thick layer of SiO 2 , covering a 90 nm layer of Au. The electric field is measured using a two-photon transition to the and states. The electric field value that we measure is higher than typical values measured above metal surfaces, but is consistent with a recent measurement above a SiO 2 surface. In addition, we measure the temporal behaviour of the field and observe that we can reduce it in a single experimental cycle, using ultraviolet light or by mildly locally heating the surface with one of the excitation lasers, whereas the buildup of the field takes thousands of cycles. We explain these results by a change in the adatom distribution on the surface. These results indicate that, while the stray electric field can be reduced, achieving field-free conditions above a silica-coated gold chip remains challenging.

arXiv:1512.07511•Journal of Physics B Atomic Molecular and Optical Physics•Apr 20, 2016•16 citations

Efficient photo-ionizing elimination of detrimental electric fields for Rydberg atoms

Zhou-Chen Deng, Hao-Nan Lin, Yu-Cheng Duan +10 more

Rydberg atoms are highly sensitive to external electric fields due to their exaggerated electronic properties. This unique feature lays the foundation for many of their applications in quantum science. However, an uncontrolled stray electric field can be detrimental, severely degrading their quantum control. In this work, we demonstrate a universal scheme that relies on the efficient creation of an in-vacuum plasma source by photo-ionizing laser-cooled atoms to eliminate detrimental electric fields in a Rydberg-atom tweezer array platform, requiring only readily available resources. With this method, we began with a Stark-ionized Rydberg continuum spectrum caused by a large, unknown stray electric field and ultimately recovered stable, coherent excitation of an individual Rydberg state after fully eliminating the field. Our method is directly applicable to existing Rydberg-atom platforms and can also be useful in other experiments sensitive to stray electric fields.

physics.atom-phCross-listedarXiv:2607.08418•Physical Review Applied•Jul 10, 2026•4 citations

Electrometry near a dielectric surface using Rydberg electromagnetically induced transparency

R. P. Abel, C. Carr, Ulrich Krohn +1 more

Electrometry near a dielectric surface is performed using Rydberg electromagnetically induced transparency. The large polarizability of high-$n$-state Rydberg atoms gives this method extreme sensitivity. We show that dipoles produced by adsorbates on the dielectric surface produce a significant electric field that responds to an applied field with a time constant of order 1 s. For transient applied fields (with a time scale of less than 1 s) we observe good agreement with calculations based on numerical solutions of Laplace's equation using an effective dielectric constant to simulate the bulk dielectric.

arXiv:1106.3495•Physical Review A•Aug 12, 2011•71 citations

Characterizing the local vectorial electric field near an atom chip using Rydberg-state spectroscopy

Nataly Cisternas, Julius de Hond, G. Lochead +3 more

We use the sensitive response to electric fields of Rydberg atoms to characterize all three vector components of the local electric field close to an atom-chip surface. We measured Stark-Zeeman maps of $S$ and $D$ Rydberg states using an elongated cloud of ultracold rubidium atoms (temperature $T\ensuremath{\sim}2.5\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{K}$) trapped magnetically $100\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{m}$ from the chip surface. The spectroscopy of $S$ states yields a calibration for the generated local electric field at the position of the atoms. The values for different components of the field are extracted from the more complex response of $D$ states to the combined electric and magnetic fields. From the analysis we find residual fields in the two uncompensated directions of $0.0\ifmmode\pm\else\textpm\fi{}0.2$ and $1.98\ifmmode\pm\else\textpm\fi{}0.09$ V/cm. This method also allows us to extract a value for the relevant field gradient along the long axis of the cloud. The manipulation of electric fields and the magnetic trapping are both done using on-chip wires, making this setup a promising candidate to observe Rydberg-mediated interactions on a chip.

arXiv:1705.07685•Physical Review A•Jul 25, 2017•15 citations
Experiments handling Rydberg atoms near surfaces must necessarily deal with the high sensitivity of Rydberg atoms to (stray) electric fields that typically emanate from adsorbates on the surface. We demonstrate a method to modify and reduce the stray electric field by changing the adsorbate distribution. We use one of the Rydberg excitation lasers to locally affect the adsorbed dipole distribution. By adjusting the averaged exposure time we change the strength (with the minimal value less than 0.2V/cm0.2\phantom{\rule{0.28em}{0ex}}\mathrm{V}/\mathrm{cm}0.2V/cm at 78\ensuremathμm78\phantom{\rule{0.28em}{0ex}}\ensuremath{\mu}\mathrm{m}78\ensuremathμm from the chip) and even the sign of the perpendicular field component. This technique is a useful tool for experiments handling Rydberg atoms near surfaces, including atom chips.
We demonstrate spatially resolved, coherent excitation of Rydberg atoms on an atom chip. Electromagnetically induced transparency (EIT) is used to investigate the properties of the Rydberg atoms near the gold-coated chip surface. We measure distance-dependent shifts ( ~ 101010 MHz) of the Rydberg energy levels caused by a spatially inhomogeneous electric field. The measured field strength and distance dependence is in agreement with a simple model for the electric field produced by a localized patch of Rb adsorbates deposited on the chip surface during experiments. The EIT resonances remain narrow (<4<4<4 MHz) and the observed widths are independent of atom-surface distance down to  ~ 202020 $\ensuremath{\mu}$m, indicating relatively long lifetime of the Rydberg states. Our results open the way to studies of dipolar physics, collective excitations, quantum metrology, and quantum information processing involving interacting Rydberg excited atoms on atom chips.
We investigate the behavior of electric fields originating from adsorbates deposited on a cryogenic atom chip as it is cooled from room temperature to cryogenic temperature. Using Rydberg electromagnetically induced transparency, we measure the field strength versus distance from a 1 mm square of yttrium barium copper oxide (YBCO) patterned onto a yttria stabilized zirconia chip substrate. We find a localized and stable dipole field at room temperature and attribute it to a saturated layer of chemically adsorbed rubidium atoms on the YBCO. As the chip is cooled towards 83 K we observe a change in sign of the electric field as well as a transition from a localized to a delocalized dipole density. We relate these changes to the onset of physisorption on the chip surface when the van der Waals attraction overcomes the thermal desorption mechanisms. Our findings suggest that through careful selection of substrate materials, it may be possible to reduce the electric fields caused by atomic adsorption on chips, opening up experiments to controlled Rydberg-surface coupling schemes.
Trapping a Rydberg atom close to a surface is an important step towards the realisation of many proposals for quantum information processing or hybrid quantum systems. One of the challenges in these experiments is posed by the electric field emanating from contaminations on the surface. Here we report on measurements of an electric field created by 87 Rb atoms adsorbed on a 25 nm thick layer of SiO 2 , covering a 90 nm layer of Au. The electric field is measured using a two-photon transition to the and states. The electric field value that we measure is higher than typical values measured above metal surfaces, but is consistent with a recent measurement above a SiO 2 surface. In addition, we measure the temporal behaviour of the field and observe that we can reduce it in a single experimental cycle, using ultraviolet light or by mildly locally heating the surface with one of the excitation lasers, whereas the buildup of the field takes thousands of cycles. We explain these results by a change in the adatom distribution on the surface. These results indicate that, while the stray electric field can be reduced, achieving field-free conditions above a silica-coated gold chip remains challenging.
Rydberg atoms are highly sensitive to external electric fields due to their exaggerated electronic properties. This unique feature lays the foundation for many of their applications in quantum science. However, an uncontrolled stray electric field can be detrimental, severely degrading their quantum control. In this work, we demonstrate a universal scheme that relies on the efficient creation of an in-vacuum plasma source by photo-ionizing laser-cooled atoms to eliminate detrimental electric fields in a Rydberg-atom tweezer array platform, requiring only readily available resources. With this method, we began with a Stark-ionized Rydberg continuum spectrum caused by a large, unknown stray electric field and ultimately recovered stable, coherent excitation of an individual Rydberg state after fully eliminating the field. Our method is directly applicable to existing Rydberg-atom platforms and can also be useful in other experiments sensitive to stray electric fields.
Electrometry near a dielectric surface is performed using Rydberg electromagnetically induced transparency. The large polarizability of high-nnn-state Rydberg atoms gives this method extreme sensitivity. We show that dipoles produced by adsorbates on the dielectric surface produce a significant electric field that responds to an applied field with a time constant of order 1 s. For transient applied fields (with a time scale of less than 1 s) we observe good agreement with calculations based on numerical solutions of Laplace's equation using an effective dielectric constant to simulate the bulk dielectric.
We use the sensitive response to electric fields of Rydberg atoms to characterize all three vector components of the local electric field close to an atom-chip surface. We measured Stark-Zeeman maps of SSS and DDD Rydberg states using an elongated cloud of ultracold rubidium atoms (temperature $T\ensuremath{\sim}2.5\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{K}$) trapped magnetically $100\phantom{\rule{4pt}{0ex}}\ensuremath{\mu}\mathrm{m}$ from the chip surface. The spectroscopy of SSS states yields a calibration for the generated local electric field at the position of the atoms. The values for different components of the field are extracted from the more complex response of DDD states to the combined electric and magnetic fields. From the analysis we find residual fields in the two uncompensated directions of $0.0\ifmmode\pm\else\textpm\fi{}0.2$ and $1.98\ifmmode\pm\else\textpm\fi{}0.09$ V/cm. This method also allows us to extract a value for the relevant field gradient along the long axis of the cloud. The manipulation of electric fields and the magnetic trapping are both done using on-chip wires, making this setup a promising candidate to observe Rydberg-mediated interactions on a chip.