Electrometry near a dielectric surface is performed using Rydberg electromagnetically induced transparency. The large polarizability of high-$n$-state Rydberg atoms gives this method extreme sensitivity. We show that dipoles produced by adsorbates on the dielectric surface produce a significant electric field that responds to an applied field with a time constant of order 1 s. For transient applied fields (with a time scale of less than 1 s) we observe good agreement with calculations based on numerical solutions of Laplace's equation using an effective dielectric constant to simulate the bulk dielectric.
Electrometry near a dielectric surface is performed using Rydberg electromagnetically induced transparency. The large polarizability of high-n-state Rydberg atoms gives this method extreme sensitivity. We show that dipoles produced by adsorbates on the dielectric surface produce a significant electric field that responds to an applied field with a time constant of order 1 s. For transient applied fields (with a time scale of less than 1 s) we observe good agreement with calculations based on numerical solutions of Laplace's equation using an effective dielectric constant to simulate the bulk dielectric.
Highly excited (Rydberg) atoms have exaggerated properties making them extremely sensitive to external electromagnetic fields and interacting strongly with their environment. Atomic vapor cells represent an attractive platform for studying Rydberg atoms and fabricating quantum devices. For example, Rydberg atoms in vapor cells have been used as sensitive detectors of electric fields of frequencies ranging from DC up to the THz range but also as single photon sources for quantum technology applications exploiting collective phenomena due to the Rydberg blockade effect [1]. Rydberg atoms also find applications in fundamental physics, in particular for the measurement of dispersive interactions of the Casimir-Polder type (atom-surface interactions) [2]. One major advantage of Rydberg atoms is that they expose limitations in the traditional perturbative approach of Casimir-Polder (CP) theory [3, 4]. Indeed, in the extreme near-field, the dipole approximation breaks down and higher-order terms need to be considered. We report on extensive experimental measurements of the Rydberg-surface interaction using spectroscopy in cesium vapor nanocells of a thickness ranging roughly from 200-700nm, as well as selective reflection spectroscopy on a macroscopic cesium all-sapphire cell. Atoms are first excited to the Cs(6P) level with a 894nm pump laser and subsequently a green laser ≈ 510nm probes Rydberg nD or nS states, where the principal quantum number n ranges between 15-17. Our experiments evidence the dipole-dipole term of the Casimir-Polder interaction providing a measurement of the C3 coefficient for cesium Rydberg states. Furthermore, our experiment clearly evidences an additional interaction that induces shifts and broadens the linewidth of the probed transitions in the vicinity of the dielectric windows of our cells. We believe that this interaction is due to electric fields that are either generated by patch charges (trapped on the surface or induced by the excitation lasers), or by cesium adsorbants. We show that the different polarizability (of opposing sign) between S and D Rydberg states can be exploited to extract quantitative measurements of the strength and distance scaling (z-dependence) of such parasitic electrostatic interactions.Our experiments suggest that the sensitivity of Rydberg atoms to external electric fields could provide a unique tool for probing electrostatic interactions in the vicinity of surfaces. This could allow systematic error corrections in Casimir-Polder experiments with excited or even ground state atoms that aim at putting bounds on the existence of non-Newtonian gravity [5]. We are currently exploring the possibility of coating the internal window interfaces with conducting 2D material such as graphene to reduce the influence of parasitic charges. This could allow us to probe atoms closer to the surface, where quadrupole interactions could be experimentally attainable for the first time [4].References[1] H. Kubler, J. P. Shaffer, T. Baluktsian, R. Loew, T. Pfau, Nat. Photon., 4, 112–116 (2013).[2] V. Sandoghdar et al., Phys. Rev. Lett 68, 3432–3435 (1993).[3] J. A. Crosse et al., Phys. Rev. A 82, 3010901 (2010).[4] B. Dutta et al., Phys. Rev. Res. 6, L022035 (2024).[5] A. Laliotis, B-S. Lu, M. Ducloy, D. Wilkowski, AVS Quantum Sci. 3, 043501 (2021).
We demonstrate spatially resolved, coherent excitation of Rydberg atoms on an atom chip. Electromagnetically induced transparency (EIT) is used to investigate the properties of the Rydberg atoms near the gold-coated chip surface. We measure distance-dependent shifts (10 MHz) of the Rydberg energy levels caused by a spatially inhomogeneous electric field. The measured field strength and distance dependence is in agreement with a simple model for the electric field produced by a localized patch of Rb adsorbates deposited on the chip surface during experiments. The EIT resonances remain narrow (<4 MHz) and the observed widths are independent of atom-surface distance down to 20 $\ensuremath{\mu}$m, indicating relatively long lifetime of the Rydberg states. Our results open the way to studies of dipolar physics, collective excitations, quantum metrology, and quantum information processing involving interacting Rydberg excited atoms on atom chips.
Rydberg-assisted atomic electrometry with thermal vapors offers a promising approach for detecting external electric fields. However, this technique presents significant challenges for measuring low frequencies due to the effects of metal-alkali atoms adsorbed on the interior surface of the vacuum chamber. In this work, we apply high-contrast Rydberg electromagnetically induced transparency (EIT) spectroscopy to systematically investigate these effects, including the influence of laser power and electric field strength. We demonstrate the ability to measure electric field frequencies ranging from 10 Hz to 1 MHz. Additionally, this study identifies a fundamental limit for data capacity in such measurements. Furthermore, we propose a method for precise Stark shift measurements by locking the coupling laser to Zeeman-split Rydberg EIT peaks. Using the Zeeman shift in a reference cell as a stable frequency reference, we are able to track Stark-induced shifts in a science cell and confirm excellent agreement with theoretical predictions. These results provide valuable insights for future precision measurement techniques and field sensing applications based on Rydberg atom systems.
Experiments handling Rydberg atoms near surfaces must necessarily deal with the high sensitivity of Rydberg atoms to (stray) electric fields that typically emanate from adsorbates on the surface. We demonstrate a method to modify and reduce the stray electric field by changing the adsorbate distribution. We use one of the Rydberg excitation lasers to locally affect the adsorbed dipole distribution. By adjusting the averaged exposure time we change the strength (with the minimal value less than 0.2V/cm at $78\phantom{\rule{0.28em}{0ex}}\ensuremath{\mu}\mathrm{m}$ from the chip) and even the sign of the perpendicular field component. This technique is a useful tool for experiments handling Rydberg atoms near surfaces, including atom chips.
We observe the shift of Rydberg levels of rubidium close to a copper surface when atomic clouds are repeatedly deposited on it. We measure transition frequencies of rubidium to S and D Rydberg states with principal quantum numbers n between 31 and 48 using the technique of electromagnetically induced transparency. The spectroscopic measurement shows a strong increase of electric fields towards the surface that evolves with the deposition of atoms. Starting with a clean surface, we measure the evolution of electrostatic fields in the range between 30 and 300 $\ensuremath{\mu}$m from the surface. We find that after the deposition of a few hundred atomic clouds, each containing $\ensuremath{\sim}$106 atoms, the field of adsorbates reaches 1 V/cm for a distance of 30 $\ensuremath{\mu}$m from the surface. This evolution of the electrostatic field sets serious limitations on cavity QED experiments proposed for Rydberg atoms on atom chips.
Atoms form the basis of precise measurement for many quantities (time, acceleration, rotation, magnetic field, etc.). Measurements of microwave frequency electric fields by traditional methods (i.e. engineered antennas) have limited sensitivity and can be difficult to calibrate properly. Highly-excited (Rydberg) neutral atoms have very large electric-dipole moments and many dipole allowed transitions in the range of 1 - 500 GHz. It is possible to sensitively probe the electric field in this range using the combination of two quantum interference phenomena: electromagnetically induced transparency and the Autler-Townes effect. This technique allows for very sensitive field amplitude, polarization, and sub-wavelength imaging measurements. These quantities can be extracted by measuring properties of a probe laser beam as it passes through a warm rubidium vapor cell. Thus far, Rydberg microwave electrometry has relied upon the absorption of the probe laser. We report on our use of polarization rotation, which corresponds to the real part of the susceptibility, for measuring the properties of microwave frequency electric fields. Our simulations show that when a magnetic field is present and directed along the optical propagation direction a polarization rotation signal exists and can be used for microwave electrometry. One central advantage in using the polarization rotation signal rather than the absorption signal is that common mode laser noise is naturally eliminated leading to a potentially dramatic increase in signal-to-noise ratio.