Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1607.00063 · Physical Review A

Engineering interactions between superconducting qubits and phononic nanostructures

Patricio Arrangoiz-Arriola, Amir H. Safavi‐Naeini

Published Dec 30, 2016• 34 citations
arXivHTMLPDF

Abstract

Nanomechanical systems can support highly coherent microwave-frequency excitations at cryogenic temperatures. However, generating sufficient coupling between these devices and superconducting quantum circuits is challenging due to the vastly different length scales of acoustic and electromagnetic excitations. Here we demonstrate a general method for calculating piezoelectric interactions between quantum circuits and arbitrary phononic nanostructures. We illustrate our technique by studying the coupling between a transmon qubit and bulk acoustic-wave, Lamb-wave, and phononic crystal resonators, and show that very large coupling rates are possible in all three cases. Our results suggest a route to phononic circuits and systems that are nonlinear at the single-phonon level.

DOI
10.1103/physreva.94.063864

Related papers

Quantum acoustics with superconducting qubits

Yiwen Chu, Prashanta Kharel, William H. Renninger +4 more

Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.

arXiv:1703.00342•Science•Sep 22, 2017•502 citations

Measurements of a quantum bulk acoustic resonator using a superconducting qubit

M.-H. Chou, Étienne Dumur, Youpeng Zhong +8 more

Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Qi≈4.3×104. Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.

arXiv:2012.04583•Applied Physics Letters•Dec 21, 2020•18 citations

Interfacing planar superconducting qubits with high overtone bulk acoustic phonons

Mikael Kervinen, Ilkka Rissanen, Mika A. Sillanpää

Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.

arXiv:1802.06642•Physical review. B./Physical review. B•May 29, 2018•46 citations

Engineering multimode interactions in circuit quantum acoustodynamics

Uwe von Lüpke, Ines Corveira Rodrigues, Yu Yang +2 more

In recent years, important progress has been made towards encoding and processing quantum information in the large Hilbert space of bosonic modes. Mechanical resonators have several practical advantages for this purpose, because they confine many high-quality-factor modes into a small volume and can be easily integrated with different quantum systems. However, it is challenging to create direct interactions between different mechanical modes that can be used to emulate quantum gates. Here we demonstrate an in situ tunable beamsplitter-type interaction between several mechanical modes of a high-overtone bulk acoustic-wave resonator. The engineered interaction is mediated by a parametrically driven superconducting transmon qubit, and we show that it can be tailored to couple pairs or triplets of phononic modes. Furthermore, we use this interaction to demonstrate the Hong-Ou-Mandel effect between phonons. Our results lay the foundations for using phononic systems as quantum memories and platforms for quantum simulations.

arXiv:2303.00730•Nature Physics•Jan 25, 2024•55 citations

Unified Simulation Methods for Quantum Acoustic Devices

Hugo Banderier, Maxwell Drimmer, Yiwen Chu

In circuit quantum acoustodynamics (cQAD), superconducting circuits are combined with acoustic resonators to create and control nonclassical states of mechanical motion. Simulating these systems is challenging due to the extreme difference in scale between the microwave and mechanical wavelengths. All existing techniques simulate the electromagnetic and mechanical subsystems separately. However, this approach may not be adequate for all cQAD devices. Here, we demonstrate a single simulation of a superconducting qubit coupled to an acoustic and a microwave resonator and introduce two methods for using this simulation to predict the frequencies, coupling rates, and energy-participation ratios of the electromechanical modes of the hybrid system. We also discuss how these methods can be used to investigate important dissipation channels and quantify the nontrivial effects of mode hybridization in our device. Our methodology is flexible and can be extended to other acoustic resonators and quantum degrees of freedom, providing a valuable tool for designing hybrid quantum systems.

arXiv:2301.05172•Physical Review Applied•Aug 9, 2023•6 citations

Generating entanglement of two acoustic modes by driving the qubit in a circuit quantum acoustodynamics system

Mei‐Rong Wei, Qi Guo, Gang Li +1 more

We propose how to generate the entanglement of two long-lived phonon modes in a circuit quantum acoustodynamics system, which consists of a multimode high-frequency bulk acoustic wave resonator and a transmon-type superconducting qubit. Two acoustic modes couple to the qubit through piezoelectric interaction, and the qubit is driven by a microwave field. Under the condition of far detuning between the qubit and acoustic modes, the qubit can be eliminated adiabatically, thus establishing the indirect interaction between the two acoustic modes. We demonstrate that such an indirect interaction can be a parametric-amplification-type interaction by appropriately choosing the drive frequency and strength, so the entanglement between acoustic modes can be created by the direct unitary evolution. We numerically analyze the parameter conditions for generating the entanglement in detail and evaluate the influence of system dissipations and noise. The results show that the scheme can be realized using currently available parameters and has strong robustness against the dissipations and the environmental temperature. This work may provide an efficient resource for the quantum information processing based on the phononic systems.

arXiv:2410.11630•Physical Review A•May 8, 2025•4 citations
Nanomechanical systems can support highly coherent microwave-frequency excitations at cryogenic temperatures. However, generating sufficient coupling between these devices and superconducting quantum circuits is challenging due to the vastly different length scales of acoustic and electromagnetic excitations. Here we demonstrate a general method for calculating piezoelectric interactions between quantum circuits and arbitrary phononic nanostructures. We illustrate our technique by studying the coupling between a transmon qubit and bulk acoustic-wave, Lamb-wave, and phononic crystal resonators, and show that very large coupling rates are possible in all three cases. Our results suggest a route to phononic circuits and systems that are nonlinear at the single-phonon level.
Mechanical objects have important practical applications in the fields of quantum information and metrology as quantum memories or transducers for measuring and connecting different types of quantum systems. The field of electromechanics is in pursuit of a robust and highly coherent device that couples motion to nonlinear quantum objects such as superconducting qubits. Here, we experimentally demonstrate a high-frequency bulk acoustic wave resonator that is strongly coupled to a superconducting qubit using piezoelectric transduction with a cooperativity of 260. We measure qubit and mechanical coherence times on the order of 10 microseconds. Our device requires only simple fabrication methods and provides controllable access to a multitude of phonon modes. We demonstrate quantum control and measurement on gigahertz phonons at the single-quantum level.
Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Qi≈4.3×104. Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.
Mechanical resonators are a promising way for interfacing qubits in order to realize hybrid quantum systems that offer great possibilities for applications. Mechanical systems can have very long energy lifetimes, and they can be further interfaced to other systems. Moreover, integration of a mechanical oscillator with qubits creates a potential platform for the exploration of quantum physics in macroscopic mechanical degrees of freedom. The utilization of high overtone bulk acoustic resonators coupled to superconducting qubits is an intriguing platform towards these goals. These resonators exhibit a combination of high-frequency and high-quality factors. They can reach their quantum ground state at dilution refrigeration temperatures and they can be strongly coupled to superconducting qubits via their piezoelectric effect. In this paper, we demonstrate our system where bulk acoustic phonons of a high overtone resonator are coupled to a transmon qubit in a planar circuit architecture. We show that the bulk acoustic phonons are interacting with the qubit in a simple design architecture at the quantum level, representing further progress towards the quantum control of mechanical motion.
In recent years, important progress has been made towards encoding and processing quantum information in the large Hilbert space of bosonic modes. Mechanical resonators have several practical advantages for this purpose, because they confine many high-quality-factor modes into a small volume and can be easily integrated with different quantum systems. However, it is challenging to create direct interactions between different mechanical modes that can be used to emulate quantum gates. Here we demonstrate an in situ tunable beamsplitter-type interaction between several mechanical modes of a high-overtone bulk acoustic-wave resonator. The engineered interaction is mediated by a parametrically driven superconducting transmon qubit, and we show that it can be tailored to couple pairs or triplets of phononic modes. Furthermore, we use this interaction to demonstrate the Hong-Ou-Mandel effect between phonons. Our results lay the foundations for using phononic systems as quantum memories and platforms for quantum simulations.
In circuit quantum acoustodynamics (cQAD), superconducting circuits are combined with acoustic resonators to create and control nonclassical states of mechanical motion. Simulating these systems is challenging due to the extreme difference in scale between the microwave and mechanical wavelengths. All existing techniques simulate the electromagnetic and mechanical subsystems separately. However, this approach may not be adequate for all cQAD devices. Here, we demonstrate a single simulation of a superconducting qubit coupled to an acoustic and a microwave resonator and introduce two methods for using this simulation to predict the frequencies, coupling rates, and energy-participation ratios of the electromechanical modes of the hybrid system. We also discuss how these methods can be used to investigate important dissipation channels and quantify the nontrivial effects of mode hybridization in our device. Our methodology is flexible and can be extended to other acoustic resonators and quantum degrees of freedom, providing a valuable tool for designing hybrid quantum systems.
We propose how to generate the entanglement of two long-lived phonon modes in a circuit quantum acoustodynamics system, which consists of a multimode high-frequency bulk acoustic wave resonator and a transmon-type superconducting qubit. Two acoustic modes couple to the qubit through piezoelectric interaction, and the qubit is driven by a microwave field. Under the condition of far detuning between the qubit and acoustic modes, the qubit can be eliminated adiabatically, thus establishing the indirect interaction between the two acoustic modes. We demonstrate that such an indirect interaction can be a parametric-amplification-type interaction by appropriately choosing the drive frequency and strength, so the entanglement between acoustic modes can be created by the direct unitary evolution. We numerically analyze the parameter conditions for generating the entanglement in detail and evaluate the influence of system dissipations and noise. The results show that the scheme can be realized using currently available parameters and has strong robustness against the dissipations and the environmental temperature. This work may provide an efficient resource for the quantum information processing based on the phononic systems.