Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1609.01241

Quantum Circuit Design of Integer Division Optimizing Ancillary Qubits and T-Count

Himanshu Thapliyal, Varun, T. S. S., Edgard Muñoz‐Coreas

Published Sep 5, 2016• 9 citations
arXivHTMLPDF

Abstract

In this paper, we present Clifford+T gates based quantum circuit design of integer division having $n$ ancillary qubits. The proposed quantum circuit is based on restoring division algorithm. The proposed quantum circuit of integer division consists of (i) quantum circuitry of conditional addition operation, (ii) quantum circuitry of integer subtraction. To design ancillary and T-count optimized design of quantum integer division, the optimized quantum circuit design of integer conditional addition operation and integer subtraction are presented. The proposed quantum integer division circuitry has 50\% improvement in terms of ancillary qubits, and 90\% improvement in terms of T-count compared to the existing design of integer quantum division based on quantum fourier transform.

DOI
10.48550/arxiv.1609.01241

Related papers

Improved quantum circuits for division

Priyanka Mukhopadhyay, Alexandru Gheorghiu, Hari Krovi

Arithmetic operations are an important component of many quantum algorithms. Optimizing quantum circuits for these operations therefore leads to more efficient implementations of the corresponding algorithms. In this paper, we develop new fault-tolerant quantum circuits for various integer division algorithms (both reversible and non-reversible). These circuits, when implemented in the Clifford+T gate set, achieve improvements in the asymptotic T-count and CNOT-count from $O(n^2)$ to $O(nm)$, and in the asymptotic T-depth from $O(n^2)$ to $O(n \log m)$, where $n$ and $m$ are the bit lengths of the dividend and divisor, respectively. The qubit counts are significantly lower than those in previous works. We achieve this through careful modifications of the division algorithms and by expressing them in terms of a primitive we call COMP-N-SUB that compares two integers and conditionally subtracts them. We show that this primitive can be implemented at a cost, in terms of both Clifford and non-Clifford gates, comparable to that of one addition. By contrast, performing comparison and conditional subtraction separately would cost roughly as much as a controlled addition plus a regular addition.

quant-pharXiv:2603.18110•Mar 19, 2026•1 citation

Quantum Circuit Designs of Integer Division Optimizing T-Count and T-Depth

Himanshu Thapliyal, T. S. S. Varun, Edgard Muñoz‐Coreas +2 more

Quantum circuits for mathematical functions such as division are necessary to use quantum computers for scientific computing. Quantum circuits based on Clifford+T gates can easily be made fault-tolerant but the T gate is very costly to implement. The small number of qubits available in existing quantum computers adds another constraint on quantum circuits. As a result, reducing T-count and qubit cost have become important optimization goals. The design of quantum circuits for integer division has caught the attention of researchers and designs have been proposed in the literature. However, these designs suffer from excessive T gate and qubit costs. Many of these designs also produce significant garbage output resulting in additional qubit and T gate costs to eliminate these outputs. In this work, we propose two quantum integer division circuits. The first proposed quantum integer division circuit is based on the restoring division algorithm and the second proposed design implements the non-restoring division algorithm. Both proposed designs are optimized in terms of T-count, T-depth and qubits. Both proposed quantum circuit designs are based on (i) a quantum subtractor, (ii) a quantum adder-subtractor circuit, and (iii) a novel quantum conditional addition circuit. Our proposed restoring division circuit achieves average T-count savings from 79.03 to 91.69 percent compared to the existing works. Our proposed non-restoring division circuit achieves average T-count savings from 49.22 to 90.03 percent compared to the existing works. Further, both our proposed designs have linear T-depth. We also illustrate the application of the proposed quantum division circuits in quantum image processing with a case study of quantum bilinear interpolation.

arXiv:1809.09732•IEEE Transactions on Emerging Topics in Computing•Dec 1, 2017•87 citations

T-Count Optimized Quantum Circuit Designs for Single-Precision Floating-Point Division

S. S. Gayathri, R. Kumar, Samiappan Dhanalakshmi +2 more

The implementation of quantum computing processors for scientific applications includes quantum floating points circuits for arithmetic operations. This work adopts the standard division algorithms for floating-point numbers with restoring, non-restoring, and Goldschmidt division algorithms for single-precision inputs. The design proposals are carried out while using the quantum Clifford+T gates set, and resource estimates in terms of numbers of qubits, T-count, and T-depth are provided for the proposed circuits. By improving the leading zero detector (LZD) unit structure, the proposed division circuits show a significant reduction in the T-count when compared to the existing works on floating-point division.

Electronics•Mar 17, 2021•26 citations

The integer multiplier with two unchanged operands reducing T and CNOT gates

Ping Fan, Hai-Sheng Li

Quantum circuits for multiplication are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant implementations. The costs of implementing T and double-qubit gates are higher than those of other one-qubit gates in the Clifford + T group. In addition, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. Therefore, we reduce T and CNOT gates and circuit width as the primary optimization goal in this paper. We propose an algorithm for multiplication with two unchanged operands. Preserving both operands of the multiplication is important for realizing some quantum algorithms, such as quantum bilinear interpolation. Using this algorithm, we design the circuit of the integer multiplier with two unchanged operands reducing CNOT gates. Next, we develop a Clifford + T circuit for the multiplier and introduce new optimization rules to reduce T gates. Comparative analysis shows that the proposed multiplier achieves the best width among existing multipliers. Compared to multipliers with two unchanged operands that use at most one ancillary qubit, our proposed multiplier has the best T-count, T-depth, and CNOT-count.

EPJ Quantum Technology•Apr 29, 2025•3 citations

Quantum Circuit Design of a T-count Optimized Integer Multiplier

Edgard Muñoz‐Coreas, Himanshu Thapliyal

Quantum circuits of many qubits are extremely difficult to realize; thus, the number of qubits is an important metric in a quantum circuit design. Further, scalable and reliable quantum circuits are based on fault tolerant implementations of quantum gates such as Clifford+T gates. An efficient quantum circuit saves quantum hardware resources by reducing the number of T gates without substantially increasing the number of qubits. This work presents a T-count optimized quantum circuit for integer multiplication with only 4 · n + 1 qubits and no garbage outputs. The proposed quantum multiplier design reduces the T-count by using a novel quantum conditional adder circuit. Also, where one operand to the conditional adder is zero, the conditional adder is replaced with a Toffoli gate array to further save T gates. Average T-count savings of 46:12, 47:55, 62:71 and 26.30 percent are achieved compared to the recent works by Kotiyal et al., Babu, Lin et al., and Jayashree et al., respectively.

arXiv:1706.05113•IEEE Transactions on Computers•Nov 22, 2018•112 citations

Qubit and T-count Optimized Quantum Circuit Design for Fixed Precision Square Root

Afrin Sultana, Edgard Muñoz‐Coreas

Quantum square root operation is a useful building block in implementing important quantum algorithms such as the Harrow–Hassidim–Lloyd (HHL) algorithm, algorithms in physics and quantum chemistry, and also used in computing roots of quadratic equation, evaluating quadratic congruence, solving Hamiltonian and Poisson equations, trigonometric functions, computing logarithm and fractional exponent, and in quantum chemistry [1]–[5]. Quantum circuits could be made fault-tolerant by using error correcting codes and fault-tolerant quantum gates (such as the Clifford + T-gates). However, The T-gates are expensive to implement than other fault-tolerant gates (such as Clifford+T gates) [6] [7]. Therefore, quantum circuits with low T-count and qubit cost is preferred. In this paper, we present a novel quantum square root architecture optimized for T-count and Qubit cost that produces no garbage outputs. The proposed square root circuit accepts integer and fractional inputs. We use the Babylonian method to calculate the square root. To reduce the number of iteration, the initial guess required in the Babylonian method is calculated from the integer square root circuit in [8] which reduces the cost measures. To further save the cost, we use the resource efficient non-restoring division circuit shown in [9] and quantum adder shown in [6]. The proposed quantum square root circuit sees an asymptotic reduction of 95.84% in T-count and 88.89% in Qubit cost with respect to Bhaskar et al. [1]. With respect to Dutta et al. [10] the design sees an asymptotic reduction of 96% in T-count, and 88.89% in Qubit cost.

IEEE Computer Society Annual Symposium on VLSI•Jul 1, 2024•0 citations
In this paper, we present Clifford+T gates based quantum circuit design of integer division having nnn ancillary qubits. The proposed quantum circuit is based on restoring division algorithm. The proposed quantum circuit of integer division consists of (i) quantum circuitry of conditional addition operation, (ii) quantum circuitry of integer subtraction. To design ancillary and T-count optimized design of quantum integer division, the optimized quantum circuit design of integer conditional addition operation and integer subtraction are presented. The proposed quantum integer division circuitry has 50% improvement in terms of ancillary qubits, and 90% improvement in terms of T-count compared to the existing design of integer quantum division based on quantum fourier transform.
Arithmetic operations are an important component of many quantum algorithms. Optimizing quantum circuits for these operations therefore leads to more efficient implementations of the corresponding algorithms. In this paper, we develop new fault-tolerant quantum circuits for various integer division algorithms (both reversible and non-reversible). These circuits, when implemented in the Clifford+T gate set, achieve improvements in the asymptotic T-count and CNOT-count from O(n2)O(n^2)O(n2) to O(nm)O(nm)O(nm), and in the asymptotic T-depth from O(n2)O(n^2)O(n2) to O(nlog⁡m)O(n \log m)O(nlogm), where nnn and mmm are the bit lengths of the dividend and divisor, respectively. The qubit counts are significantly lower than those in previous works. We achieve this through careful modifications of the division algorithms and by expressing them in terms of a primitive we call COMP-N-SUB that compares two integers and conditionally subtracts them. We show that this primitive can be implemented at a cost, in terms of both Clifford and non-Clifford gates, comparable to that of one addition. By contrast, performing comparison and conditional subtraction separately would cost roughly as much as a controlled addition plus a regular addition.
Quantum circuits for mathematical functions such as division are necessary to use quantum computers for scientific computing. Quantum circuits based on Clifford+T gates can easily be made fault-tolerant but the T gate is very costly to implement. The small number of qubits available in existing quantum computers adds another constraint on quantum circuits. As a result, reducing T-count and qubit cost have become important optimization goals. The design of quantum circuits for integer division has caught the attention of researchers and designs have been proposed in the literature. However, these designs suffer from excessive T gate and qubit costs. Many of these designs also produce significant garbage output resulting in additional qubit and T gate costs to eliminate these outputs. In this work, we propose two quantum integer division circuits. The first proposed quantum integer division circuit is based on the restoring division algorithm and the second proposed design implements the non-restoring division algorithm. Both proposed designs are optimized in terms of T-count, T-depth and qubits. Both proposed quantum circuit designs are based on (i) a quantum subtractor, (ii) a quantum adder-subtractor circuit, and (iii) a novel quantum conditional addition circuit. Our proposed restoring division circuit achieves average T-count savings from 79.03 to 91.69 percent compared to the existing works. Our proposed non-restoring division circuit achieves average T-count savings from 49.22 to 90.03 percent compared to the existing works. Further, both our proposed designs have linear T-depth. We also illustrate the application of the proposed quantum division circuits in quantum image processing with a case study of quantum bilinear interpolation.
The implementation of quantum computing processors for scientific applications includes quantum floating points circuits for arithmetic operations. This work adopts the standard division algorithms for floating-point numbers with restoring, non-restoring, and Goldschmidt division algorithms for single-precision inputs. The design proposals are carried out while using the quantum Clifford+T gates set, and resource estimates in terms of numbers of qubits, T-count, and T-depth are provided for the proposed circuits. By improving the leading zero detector (LZD) unit structure, the proposed division circuits show a significant reduction in the T-count when compared to the existing works on floating-point division.
Quantum circuits for multiplication are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant implementations. The costs of implementing T and double-qubit gates are higher than those of other one-qubit gates in the Clifford + T group. In addition, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. Therefore, we reduce T and CNOT gates and circuit width as the primary optimization goal in this paper. We propose an algorithm for multiplication with two unchanged operands. Preserving both operands of the multiplication is important for realizing some quantum algorithms, such as quantum bilinear interpolation. Using this algorithm, we design the circuit of the integer multiplier with two unchanged operands reducing CNOT gates. Next, we develop a Clifford + T circuit for the multiplier and introduce new optimization rules to reduce T gates. Comparative analysis shows that the proposed multiplier achieves the best width among existing multipliers. Compared to multipliers with two unchanged operands that use at most one ancillary qubit, our proposed multiplier has the best T-count, T-depth, and CNOT-count.
Quantum circuits of many qubits are extremely difficult to realize; thus, the number of qubits is an important metric in a quantum circuit design. Further, scalable and reliable quantum circuits are based on fault tolerant implementations of quantum gates such as Clifford+T gates. An efficient quantum circuit saves quantum hardware resources by reducing the number of T gates without substantially increasing the number of qubits. This work presents a T-count optimized quantum circuit for integer multiplication with only 4 · n + 1 qubits and no garbage outputs. The proposed quantum multiplier design reduces the T-count by using a novel quantum conditional adder circuit. Also, where one operand to the conditional adder is zero, the conditional adder is replaced with a Toffoli gate array to further save T gates. Average T-count savings of 46:12, 47:55, 62:71 and 26.30 percent are achieved compared to the recent works by Kotiyal et al., Babu, Lin et al., and Jayashree et al., respectively.
Quantum square root operation is a useful building block in implementing important quantum algorithms such as the Harrow–Hassidim–Lloyd (HHL) algorithm, algorithms in physics and quantum chemistry, and also used in computing roots of quadratic equation, evaluating quadratic congruence, solving Hamiltonian and Poisson equations, trigonometric functions, computing logarithm and fractional exponent, and in quantum chemistry [1]–[5]. Quantum circuits could be made fault-tolerant by using error correcting codes and fault-tolerant quantum gates (such as the Clifford + T-gates). However, The T-gates are expensive to implement than other fault-tolerant gates (such as Clifford+T gates) [6] [7]. Therefore, quantum circuits with low T-count and qubit cost is preferred. In this paper, we present a novel quantum square root architecture optimized for T-count and Qubit cost that produces no garbage outputs. The proposed square root circuit accepts integer and fractional inputs. We use the Babylonian method to calculate the square root. To reduce the number of iteration, the initial guess required in the Babylonian method is calculated from the integer square root circuit in [8] which reduces the cost measures. To further save the cost, we use the resource efficient non-restoring division circuit shown in [9] and quantum adder shown in [6]. The proposed quantum square root circuit sees an asymptotic reduction of 95.84% in T-count and 88.89% in Qubit cost with respect to Bhaskar et al. [1]. With respect to Dutta et al. [10] the design sees an asymptotic reduction of 96% in T-count, and 88.89% in Qubit cost.