Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1706.05113 · IEEE Transactions on Computers

Quantum Circuit Design of a T-count Optimized Integer Multiplier

Edgard Muñoz‐Coreas, Himanshu Thapliyal

Published Nov 22, 2018• 112 citations
arXivHTMLPDF

Abstract

Quantum circuits of many qubits are extremely difficult to realize; thus, the number of qubits is an important metric in a quantum circuit design. Further, scalable and reliable quantum circuits are based on fault tolerant implementations of quantum gates such as Clifford+T gates. An efficient quantum circuit saves quantum hardware resources by reducing the number of T gates without substantially increasing the number of qubits. This work presents a T-count optimized quantum circuit for integer multiplication with only 4 · n + 1 qubits and no garbage outputs. The proposed quantum multiplier design reduces the T-count by using a novel quantum conditional adder circuit. Also, where one operand to the conditional adder is zero, the conditional adder is replaced with a Toffoli gate array to further save T gates. Average T-count savings of 46:12, 47:55, 62:71 and 26.30 percent are achieved compared to the recent works by Kotiyal et al., Babu, Lin et al., and Jayashree et al., respectively.

DOI
10.1109/tc.2018.2882774

Related papers

Quantum Circuit Designs of Integer Division Optimizing T-Count and T-Depth

Himanshu Thapliyal, T. S. S. Varun, Edgard Muñoz‐Coreas +2 more

Quantum circuits for mathematical functions such as division are necessary to use quantum computers for scientific computing. Quantum circuits based on Clifford+T gates can easily be made fault-tolerant but the T gate is very costly to implement. The small number of qubits available in existing quantum computers adds another constraint on quantum circuits. As a result, reducing T-count and qubit cost have become important optimization goals. The design of quantum circuits for integer division has caught the attention of researchers and designs have been proposed in the literature. However, these designs suffer from excessive T gate and qubit costs. Many of these designs also produce significant garbage output resulting in additional qubit and T gate costs to eliminate these outputs. In this work, we propose two quantum integer division circuits. The first proposed quantum integer division circuit is based on the restoring division algorithm and the second proposed design implements the non-restoring division algorithm. Both proposed designs are optimized in terms of T-count, T-depth and qubits. Both proposed quantum circuit designs are based on (i) a quantum subtractor, (ii) a quantum adder-subtractor circuit, and (iii) a novel quantum conditional addition circuit. Our proposed restoring division circuit achieves average T-count savings from 79.03 to 91.69 percent compared to the existing works. Our proposed non-restoring division circuit achieves average T-count savings from 49.22 to 90.03 percent compared to the existing works. Further, both our proposed designs have linear T-depth. We also illustrate the application of the proposed quantum division circuits in quantum image processing with a case study of quantum bilinear interpolation.

arXiv:1809.09732•IEEE Transactions on Emerging Topics in Computing•Dec 1, 2017•87 citations

T-count and Qubit Optimized Quantum Circuit Design of the Non-Restoring Square Root Algorithm

Edgard Muñoz‐Coreas, Himanshu Thapliyal

Quantum circuits for basic mathematical functions such as the square root are required to implement scientific computing algorithms on quantum computers. Quantum circuits that are based on Clifford+T gates can easily be made fault tolerant, but the T gate is very costly to implement. As a result, reducing T-count has become an important optimization goal. Further, quantum circuits with many qubits are difficult to realize, making designs that save qubits and produce no garbage outputs desirable. In this work, we present a T-count optimized quantum square root circuit with only 2 ṡ n + 1 qubits and no garbage output. To make a fair comparison against existing work, the Bennett’s garbage removal scheme is used to remove garbage output from existing works. We determined that our proposed design achieves an average T-count savings of 43.44%, 98.95%, 41.06%, and 20.28% as well as qubit savings of 85.46%, 95.16%, 90.59%, and 86.77% compared to existing works.

arXiv:1712.08254•ACM Journal on Emerging Technologies in Computing Systems•Jul 31, 2018•43 citations

The integer multiplier with two unchanged operands reducing T and CNOT gates

Ping Fan, Hai-Sheng Li

Quantum circuits for multiplication are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant implementations. The costs of implementing T and double-qubit gates are higher than those of other one-qubit gates in the Clifford + T group. In addition, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. Therefore, we reduce T and CNOT gates and circuit width as the primary optimization goal in this paper. We propose an algorithm for multiplication with two unchanged operands. Preserving both operands of the multiplication is important for realizing some quantum algorithms, such as quantum bilinear interpolation. Using this algorithm, we design the circuit of the integer multiplier with two unchanged operands reducing CNOT gates. Next, we develop a Clifford + T circuit for the multiplier and introduce new optimization rules to reduce T gates. Comparative analysis shows that the proposed multiplier achieves the best width among existing multipliers. Compared to multipliers with two unchanged operands that use at most one ancillary qubit, our proposed multiplier has the best T-count, T-depth, and CNOT-count.

EPJ Quantum Technology•Apr 29, 2025•3 citations

Designs of the divider and special multiplier optimizing T and CNOT gates

Ping Fan, Hai-Sheng Li

Abstract Quantum circuits for multiplication and division are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant realizations. T gates are more expensive than other gates in Clifford + T circuits. But neglecting the cost of CNOT gates may lead to a significant underestimation. Moreover, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. As a result, reducing T-count, T-depth, CNOT-count, CNOT-depth, and circuit width has become the important optimization goal. We use 3-bit Hermitian gates to design basic arithmetic operations. Then, we present a special multiplier and a divider using basic arithmetic operations, where ‘special’ means that one of the two operands of multiplication is non-zero. Next, we use new rules to optimize the Clifford + T circuits of the special multiplier and divider in terms of T-count, T-depth, CNOT-count, CNOT-depth, and circuit width. Comparative analysis shows that the proposed multiplier and divider have lower T-count, T-depth, CNOT-count, and CNOT-depth than the current works. For instance, the proposed 32-bit divider achieves improvement ratios of 40.41 percent, 31.64 percent, 45.27 percent, and 65.93 percent in terms of T-count, T-depth, CNOT-count, and CNOT-depth compared to the best current work. Further, the circuit widths of the proposed n -bit multiplier and divider are 3 n . I.e., our multiplier and divider reach the minimum width of multipliers and dividers, keeping an operand unchanged.

EPJ Quantum Technology•Feb 23, 2024•5 citations

Improving the number of T gates and their spread in integer multipliers on quantum computing

Francisco José Orts, Ernestas Filatovas, Gloria Ortega +2 more

Quantum circuits performing arithmetic operations are critical in quantum computing because of the need for such operations in proven quantum algorithms. Although quantum computers are becoming increasingly resourceful, the number of qubits currently available is still limited. Furthermore, these qubits are heavily affected by internal and external noise. It has been proven that quantum circuits built using Clifford $+T$ gates can be made fault tolerant. However, the use of the $T$ gates comes at a very high cost. If the number of $T$ gates used in a circuit is not optimized, the cost of the circuit will be increased excessively. As a consequence, it is essential to optimize the circuits so that they are as resource efficient as possible and also noise tolerant. This paper presents the design of a circuit to perform the multiplication of two integers. The circuit is built using only Clifford $+T$ gates for compatibility with error detection and correction codes. It outperforms the circuits in the state of the art in terms of $T$ count and $T$ depth.

Physical Review A•Apr 27, 2023•17 citations

Qubit and T-count Optimized Quantum Circuit Design for Fixed Precision Square Root

Afrin Sultana, Edgard Muñoz‐Coreas

Quantum square root operation is a useful building block in implementing important quantum algorithms such as the Harrow–Hassidim–Lloyd (HHL) algorithm, algorithms in physics and quantum chemistry, and also used in computing roots of quadratic equation, evaluating quadratic congruence, solving Hamiltonian and Poisson equations, trigonometric functions, computing logarithm and fractional exponent, and in quantum chemistry [1]–[5]. Quantum circuits could be made fault-tolerant by using error correcting codes and fault-tolerant quantum gates (such as the Clifford + T-gates). However, The T-gates are expensive to implement than other fault-tolerant gates (such as Clifford+T gates) [6] [7]. Therefore, quantum circuits with low T-count and qubit cost is preferred. In this paper, we present a novel quantum square root architecture optimized for T-count and Qubit cost that produces no garbage outputs. The proposed square root circuit accepts integer and fractional inputs. We use the Babylonian method to calculate the square root. To reduce the number of iteration, the initial guess required in the Babylonian method is calculated from the integer square root circuit in [8] which reduces the cost measures. To further save the cost, we use the resource efficient non-restoring division circuit shown in [9] and quantum adder shown in [6]. The proposed quantum square root circuit sees an asymptotic reduction of 95.84% in T-count and 88.89% in Qubit cost with respect to Bhaskar et al. [1]. With respect to Dutta et al. [10] the design sees an asymptotic reduction of 96% in T-count, and 88.89% in Qubit cost.

IEEE Computer Society Annual Symposium on VLSI•Jul 1, 2024•0 citations
Quantum circuits of many qubits are extremely difficult to realize; thus, the number of qubits is an important metric in a quantum circuit design. Further, scalable and reliable quantum circuits are based on fault tolerant implementations of quantum gates such as Clifford+T gates. An efficient quantum circuit saves quantum hardware resources by reducing the number of T gates without substantially increasing the number of qubits. This work presents a T-count optimized quantum circuit for integer multiplication with only 4 · n + 1 qubits and no garbage outputs. The proposed quantum multiplier design reduces the T-count by using a novel quantum conditional adder circuit. Also, where one operand to the conditional adder is zero, the conditional adder is replaced with a Toffoli gate array to further save T gates. Average T-count savings of 46:12, 47:55, 62:71 and 26.30 percent are achieved compared to the recent works by Kotiyal et al., Babu, Lin et al., and Jayashree et al., respectively.
Quantum circuits for mathematical functions such as division are necessary to use quantum computers for scientific computing. Quantum circuits based on Clifford+T gates can easily be made fault-tolerant but the T gate is very costly to implement. The small number of qubits available in existing quantum computers adds another constraint on quantum circuits. As a result, reducing T-count and qubit cost have become important optimization goals. The design of quantum circuits for integer division has caught the attention of researchers and designs have been proposed in the literature. However, these designs suffer from excessive T gate and qubit costs. Many of these designs also produce significant garbage output resulting in additional qubit and T gate costs to eliminate these outputs. In this work, we propose two quantum integer division circuits. The first proposed quantum integer division circuit is based on the restoring division algorithm and the second proposed design implements the non-restoring division algorithm. Both proposed designs are optimized in terms of T-count, T-depth and qubits. Both proposed quantum circuit designs are based on (i) a quantum subtractor, (ii) a quantum adder-subtractor circuit, and (iii) a novel quantum conditional addition circuit. Our proposed restoring division circuit achieves average T-count savings from 79.03 to 91.69 percent compared to the existing works. Our proposed non-restoring division circuit achieves average T-count savings from 49.22 to 90.03 percent compared to the existing works. Further, both our proposed designs have linear T-depth. We also illustrate the application of the proposed quantum division circuits in quantum image processing with a case study of quantum bilinear interpolation.
Quantum circuits for basic mathematical functions such as the square root are required to implement scientific computing algorithms on quantum computers. Quantum circuits that are based on Clifford+T gates can easily be made fault tolerant, but the T gate is very costly to implement. As a result, reducing T-count has become an important optimization goal. Further, quantum circuits with many qubits are difficult to realize, making designs that save qubits and produce no garbage outputs desirable. In this work, we present a T-count optimized quantum square root circuit with only 2 ṡ n + 1 qubits and no garbage output. To make a fair comparison against existing work, the Bennett’s garbage removal scheme is used to remove garbage output from existing works. We determined that our proposed design achieves an average T-count savings of 43.44%, 98.95%, 41.06%, and 20.28% as well as qubit savings of 85.46%, 95.16%, 90.59%, and 86.77% compared to existing works.
Quantum circuits for multiplication are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant implementations. The costs of implementing T and double-qubit gates are higher than those of other one-qubit gates in the Clifford + T group. In addition, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. Therefore, we reduce T and CNOT gates and circuit width as the primary optimization goal in this paper. We propose an algorithm for multiplication with two unchanged operands. Preserving both operands of the multiplication is important for realizing some quantum algorithms, such as quantum bilinear interpolation. Using this algorithm, we design the circuit of the integer multiplier with two unchanged operands reducing CNOT gates. Next, we develop a Clifford + T circuit for the multiplier and introduce new optimization rules to reduce T gates. Comparative analysis shows that the proposed multiplier achieves the best width among existing multipliers. Compared to multipliers with two unchanged operands that use at most one ancillary qubit, our proposed multiplier has the best T-count, T-depth, and CNOT-count.
Abstract Quantum circuits for multiplication and division are necessary for scientific computing on quantum computers. Clifford + T circuits are widely used in fault-tolerant realizations. T gates are more expensive than other gates in Clifford + T circuits. But neglecting the cost of CNOT gates may lead to a significant underestimation. Moreover, the small number of qubits available in existing quantum devices is another constraint on quantum circuits. As a result, reducing T-count, T-depth, CNOT-count, CNOT-depth, and circuit width has become the important optimization goal. We use 3-bit Hermitian gates to design basic arithmetic operations. Then, we present a special multiplier and a divider using basic arithmetic operations, where ‘special’ means that one of the two operands of multiplication is non-zero. Next, we use new rules to optimize the Clifford + T circuits of the special multiplier and divider in terms of T-count, T-depth, CNOT-count, CNOT-depth, and circuit width. Comparative analysis shows that the proposed multiplier and divider have lower T-count, T-depth, CNOT-count, and CNOT-depth than the current works. For instance, the proposed 32-bit divider achieves improvement ratios of 40.41 percent, 31.64 percent, 45.27 percent, and 65.93 percent in terms of T-count, T-depth, CNOT-count, and CNOT-depth compared to the best current work. Further, the circuit widths of the proposed n -bit multiplier and divider are 3 n . I.e., our multiplier and divider reach the minimum width of multipliers and dividers, keeping an operand unchanged.
Quantum circuits performing arithmetic operations are critical in quantum computing because of the need for such operations in proven quantum algorithms. Although quantum computers are becoming increasingly resourceful, the number of qubits currently available is still limited. Furthermore, these qubits are heavily affected by internal and external noise. It has been proven that quantum circuits built using Clifford +T+T+T gates can be made fault tolerant. However, the use of the TTT gates comes at a very high cost. If the number of TTT gates used in a circuit is not optimized, the cost of the circuit will be increased excessively. As a consequence, it is essential to optimize the circuits so that they are as resource efficient as possible and also noise tolerant. This paper presents the design of a circuit to perform the multiplication of two integers. The circuit is built using only Clifford +T+T+T gates for compatibility with error detection and correction codes. It outperforms the circuits in the state of the art in terms of TTT count and TTT depth.
Quantum square root operation is a useful building block in implementing important quantum algorithms such as the Harrow–Hassidim–Lloyd (HHL) algorithm, algorithms in physics and quantum chemistry, and also used in computing roots of quadratic equation, evaluating quadratic congruence, solving Hamiltonian and Poisson equations, trigonometric functions, computing logarithm and fractional exponent, and in quantum chemistry [1]–[5]. Quantum circuits could be made fault-tolerant by using error correcting codes and fault-tolerant quantum gates (such as the Clifford + T-gates). However, The T-gates are expensive to implement than other fault-tolerant gates (such as Clifford+T gates) [6] [7]. Therefore, quantum circuits with low T-count and qubit cost is preferred. In this paper, we present a novel quantum square root architecture optimized for T-count and Qubit cost that produces no garbage outputs. The proposed square root circuit accepts integer and fractional inputs. We use the Babylonian method to calculate the square root. To reduce the number of iteration, the initial guess required in the Babylonian method is calculated from the integer square root circuit in [8] which reduces the cost measures. To further save the cost, we use the resource efficient non-restoring division circuit shown in [9] and quantum adder shown in [6]. The proposed quantum square root circuit sees an asymptotic reduction of 95.84% in T-count and 88.89% in Qubit cost with respect to Bhaskar et al. [1]. With respect to Dutta et al. [10] the design sees an asymptotic reduction of 96% in T-count, and 88.89% in Qubit cost.