Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1601.05548 · Applied Physics B

Design and fabrication of diffractive atom chips for laser cooling and trapping

Joseph P. Cotter, J. P. McGilligan, Paul F. Griffin, Isabel M. Rabey, Kevin E. Docherty, Erling Riis, Aidan S. Arnold, E. A. Hinds

Published Jun 1, 2016• 47 citations
arXivHTMLPDF

Abstract

It has recently been shown that optical reflection gratings fabricated directly into an atom chip provide a simple and effective way to trap and cool substantial clouds of atoms (Nshii et al. in Nat Nanotechnol 8:321-324, 2013; McGilligan et al. in Opt Express 23(7):8948-8959, 2015). In this article, we describe how the gratings are designed and microfabricated and we characterise their optical properties, which determine their effectiveness as a cold atom source. We use simple scalar diffraction theory to understand how the morphology of the gratings determines the power in the diffracted beams.

DOI
10.1007/s00340-016-6415-y

Related papers

Magneto-optical traps on a chip using micro-fabricated gratings

C. C. Nshii, Matthieu Vangeleyn, Joseph P. Cotter +7 more

We have made magneto-optical traps (MOTs) on a chip which is able to cool and trap ~108atoms directly from a ~1cm3thermal background of87Rb. Diffraction gratings are used to manipulate the light from a single input beam to create the beams required for a MOT [1,2]. The gratings are etched into the surface of a silicon or GaAs wafer by either electron beam, or photo-lithography making them simple to fabricate and integrate into other atom chip architectures. We have developed a variety of gratings for utilisation both inside and outside a vacuum chamber - facilitating their incorporation into both new and existing devices. Unlike previously integrated cold atom sources on a chip [3,4] the atoms now sit above the surface where they can be easily imaged, manipulated and transferred into other on-chip potentials.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•May 1, 2013•0 citations

Atom Chip and Diffraction Grating for the Laser Cooling of Ytterbium Atoms

Anton P. Vyalykh, P. I. Skakunenko, M. V. Shishova +5 more

The possibility of using an atom chip and a diffraction grating to form a compact magneto-optical trap for ytterbium atoms, which can be used to develop compact atomic interferometers and optical clocks based on ultracold atoms, has been studied. An experiment on the laser cooling of the 171Yb and 174Yb isotopes in a first‑stage magneto-optical trap has been carried out to determine initial requirements for the mentioned elements. The design of the atom chip forming a magnetic field gradient up to 60 G/cm has been calculated. The optimal configurations of the diffraction grating that allow forming both the first- and second-stage magneto-optical traps have been evaluated.

Journal of Experimental and Theoretical Physics Letters•Feb 1, 2024•7 citations

A compact high-flux grating chip cold atom source

Hendrik Heine, Aidan S. Arnold, Melanie S Le Gonidec +4 more

Abstract Diffraction gratings have simplified the optical implementation of magneto-optical traps (MOTs) to require only a single input beam, however reaching high atom number and fast loading has proven to be a challenge. We equipped an atom chip with a grating surface and paired it with a velocity-tunable 2D+-MOT as an atomic source to facilitate efficient loading together with magnetic trapping. Using uniform grating illumination, we magneto-optically trap 1.0 ( 1 ) × 10 9 atoms within one second, cool them to 14.1 ( 3 ) μ K , and transfer a quarter of them into the magnetic chip trap. This is a key step towards simple portable quantum sensors employing (ultra-)cold atoms.

arXiv:2406.10102•New Journal of Physics•Mar 1, 2025•9 citations

Design and optimization of grating chip for compact magneto-optical trap

Jing Dong, Xiao‐Kuan Li, Wei Li

Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.

Applied Optics and Photonics China (AOPC)•Oct 28, 2025•0 citations

Enabling the mass production of a chip-scale laser cooling platform

Alan Bregazzi, S. Dyer, Paul F. Griffin +4 more

A low-cost, mass-producible laser-cooling platform would have a transformative effect in the burgeoning field of quantum technologies and the wider research of atomic sensors. Recent advancements in the micro-fabrication of diffractive optics and vacuum apparatus have paved the way for a simple, stackable solution to the laser cooling of alkali atoms. In this paper we will highlight our recent investigations into a chip-scale, cold-atom platform, outlining our approach for on-chip wavelength referencing, examining a solution for imaging atoms in a planar stacked device, and finally discussing the limitations to passively pumped vacuum longevity. These results will be discussed in the context of an outlined road-map for the production and commercialisation of chip-scale, cold-atom sensors.

Quantum Technology: Driving Commercialisation of an Enabling Science•Oct 6, 2021•4 citations

Planar diffractive grating for magneto-optical trap application: fabrication and testing

Guochao Wang, Gaopeng Xue, Qihang Zhai +8 more

The design, fabrication, and demonstration of a planar two-dimensional-crossed reflective diffractive grating are proposed to construct a novel optical configuration, to the best of our knowledge, potentially applied for atom cooling and trapping in a magneto-optical trap. Based on the proposed single-beam single-exposure scheme by means of an orthogonal two-axis Lloyd’s mirrors interferometer, we rapidly patterned a ∼ 1 µ m period grating capable of providing a uniform intensity of the diffracted beams. The key structural parameters of the grating including the array square hole’s width and depth were determined, aiming at providing a high energy of the diffracted beams to perform the atom cooling and trapping. To guarantee the diffracted beams to be overlapped possibly, we adopted a polarized beam splitter to guide the optical path of the incident and zero-order diffracted beams. Therefore, one zero-order diffracted beam with a retroreflected mode and four first-order diffracted beams with appropriate optical path constructed a three-dimensional optical configuration of three orthogonal pairs of counterpropagating beams. Finally, three pairs of the counterpropagating cooling laser beams with 9 mm diameter and > 10 % diffraction efficiencies were achieved, and the circular polarization chirality, purity, and compensation of the desired diffracted beams are further evaluated, which preliminarily validated a high applicability for the magneto-optical trap system.

Applied Optics•Sep 29, 2021•42 citations
It has recently been shown that optical reflection gratings fabricated directly into an atom chip provide a simple and effective way to trap and cool substantial clouds of atoms (Nshii et al. in Nat Nanotechnol 8:321-324, 2013; McGilligan et al. in Opt Express 23(7):8948-8959, 2015). In this article, we describe how the gratings are designed and microfabricated and we characterise their optical properties, which determine their effectiveness as a cold atom source. We use simple scalar diffraction theory to understand how the morphology of the gratings determines the power in the diffracted beams.
We have made magneto-optical traps (MOTs) on a chip which is able to cool and trap ~108atoms directly from a ~1cm3thermal background of87Rb. Diffraction gratings are used to manipulate the light from a single input beam to create the beams required for a MOT [1,2]. The gratings are etched into the surface of a silicon or GaAs wafer by either electron beam, or photo-lithography making them simple to fabricate and integrate into other atom chip architectures. We have developed a variety of gratings for utilisation both inside and outside a vacuum chamber - facilitating their incorporation into both new and existing devices. Unlike previously integrated cold atom sources on a chip [3,4] the atoms now sit above the surface where they can be easily imaged, manipulated and transferred into other on-chip potentials.
The possibility of using an atom chip and a diffraction grating to form a compact magneto-optical trap for ytterbium atoms, which can be used to develop compact atomic interferometers and optical clocks based on ultracold atoms, has been studied. An experiment on the laser cooling of the 171Yb and 174Yb isotopes in a first‑stage magneto-optical trap has been carried out to determine initial requirements for the mentioned elements. The design of the atom chip forming a magnetic field gradient up to 60 G/cm has been calculated. The optimal configurations of the diffraction grating that allow forming both the first- and second-stage magneto-optical traps have been evaluated.
Abstract Diffraction gratings have simplified the optical implementation of magneto-optical traps (MOTs) to require only a single input beam, however reaching high atom number and fast loading has proven to be a challenge. We equipped an atom chip with a grating surface and paired it with a velocity-tunable 2D+-MOT as an atomic source to facilitate efficient loading together with magnetic trapping. Using uniform grating illumination, we magneto-optically trap 1.0 ( 1 ) × 10 9 atoms within one second, cool them to 14.1 ( 3 ) μ K , and transfer a quarter of them into the magnetic chip trap. This is a key step towards simple portable quantum sensors employing (ultra-)cold atoms.
Compared with the conventional three-dimensional magneto-optical trap (3D MOT), the grating magneto-optical trap (GMOT) enables the cooling and trapping of atoms with only a single beam of light, thereby significantly reducing the overall volume of the device. Here, a grating chip with high diffraction efficiency is designed, and its parameters are optimized through simulations, which effectively suppresses the power of the zero-order diffracted light. Subsequently, the grating chip is fabricated and characterized, and using this chip, we successfully trap 1.7×106 atoms. The temperatures of the atomic cloud in the axial and radial directions are 5.6 mK and 17.0 mK, respectively. The successful implementation of the atom cooling and trapping experiment based on the diffraction grating provides important reference for the miniaturization of cold atom-based quantum sensors.
A low-cost, mass-producible laser-cooling platform would have a transformative effect in the burgeoning field of quantum technologies and the wider research of atomic sensors. Recent advancements in the micro-fabrication of diffractive optics and vacuum apparatus have paved the way for a simple, stackable solution to the laser cooling of alkali atoms. In this paper we will highlight our recent investigations into a chip-scale, cold-atom platform, outlining our approach for on-chip wavelength referencing, examining a solution for imaging atoms in a planar stacked device, and finally discussing the limitations to passively pumped vacuum longevity. These results will be discussed in the context of an outlined road-map for the production and commercialisation of chip-scale, cold-atom sensors.
The design, fabrication, and demonstration of a planar two-dimensional-crossed reflective diffractive grating are proposed to construct a novel optical configuration, to the best of our knowledge, potentially applied for atom cooling and trapping in a magneto-optical trap. Based on the proposed single-beam single-exposure scheme by means of an orthogonal two-axis Lloyd’s mirrors interferometer, we rapidly patterned a ∼ 1 µ m period grating capable of providing a uniform intensity of the diffracted beams. The key structural parameters of the grating including the array square hole’s width and depth were determined, aiming at providing a high energy of the diffracted beams to perform the atom cooling and trapping. To guarantee the diffracted beams to be overlapped possibly, we adopted a polarized beam splitter to guide the optical path of the incident and zero-order diffracted beams. Therefore, one zero-order diffracted beam with a retroreflected mode and four first-order diffracted beams with appropriate optical path constructed a three-dimensional optical configuration of three orthogonal pairs of counterpropagating beams. Finally, three pairs of the counterpropagating cooling laser beams with 9 mm diameter and > 10 % diffraction efficiencies were achieved, and the circular polarization chirality, purity, and compensation of the desired diffracted beams are further evaluated, which preliminarily validated a high applicability for the magneto-optical trap system.