Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1504.05214 · Physical Review B

Characterizing featureless Mott insulating state by quasiparticle interference: A dynamical mean field theory view

Shantanu Mukherjee, Wei‐Cheng Lee

Published Dec 3, 2015• 1 citation
arXivHTMLPDF

Abstract

The quasiparticle interferences (QPIs) of the featureless Mott insulators are investigated by a $T$-matrix formalism implemented with the dynamical mean field theory ($T$-DMFT). In the Mott insulating state, due to the singularity at zero frequency in the real part of the electron self-energy $[\mathrm{Re}\mathrm{\ensuremath{\Sigma}}(\ensuremath{\omega})\ensuremath{\sim}\ensuremath{\eta}/\ensuremath{\omega}]$ predicted by DMFT, where $\ensuremath{\eta}$ can be considered as the ``order parameter'' for the Mott insulating state, QPIs are completely washed out at small bias voltages. However, a further analysis shows that $\mathrm{Re}\mathrm{\ensuremath{\Sigma}}(\ensuremath{\omega})$ serves as an energy-dependent chemical potential shift. As a result, the effective bias voltage seen by the system is $e{V}^{\ensuremath{'}}=eV\ensuremath{-}\mathrm{Re}\mathrm{\ensuremath{\Sigma}}(eV)$, which leads to a critical bias voltage $e{V}_{c}\ensuremath{\sim}\sqrt{\ensuremath{\eta}}$ satisfying $e{V}^{\ensuremath{'}}=0$ if and only if $\ensuremath{\eta}$ is nonzero. Consequently, the same QPI patterns produced by the noninteracting Fermi surfaces appear at this critical bias voltage $e{V}_{c}$ in the Mott insulating state. We propose that this reentry of noninteracting QPI patterns at $e{V}_{c}$ could serve as an experimental signature of the Mott insulating state, and the order parameter can be experimentally measured as $\ensuremath{\eta}\ensuremath{\sim}{(e{V}_{c})}^{2}$.

DOI
10.1103/physrevb.92.241102

Related papers

Perturbation study of nonequilibrium quasiparticle spectra in an infinite-dimensional Hubbard lattice

Ryan Heary, Jong E. Han

A model for nonequilibrium dynamical mean-field theory is constructed for the infinite-dimensional Hubbard lattice. We impose nonequilibrium by expressing the physical orbital as a superposition of a left $(L)$-moving and right $(R)$-moving electronic state with the respective chemical potentials ${\ensuremath{\mu}}_{L}$ and ${\ensuremath{\mu}}_{R}$. Using the second-order iterative perturbation theory we calculate the quasiparticle properties as a function of the chemical potential bias between the $L$ and $R$ movers, i.e., $\ensuremath{\Phi}={\ensuremath{\mu}}_{L}\ensuremath{-}{\ensuremath{\mu}}_{R}$. The evolution of the nonequilibrium quasiparticle spectrum is mapped out as a function of the bias and temperature. The quasiparticle states with the renormalized Fermi-energy scale ${\ensuremath{\epsilon}}_{QP}^{0}$ disappear at $\ensuremath{\Phi}\ensuremath{\sim}{\ensuremath{\epsilon}}_{QP}^{0}$ in the low-temperature limit. The second-order perturbation theory predicts that in the vicinity of the Mott-insulator transition at the Coulomb-parameter $U={U}_{c}$, there exists another critical Coulomb-parameter ${U}_{d}$ $(<{U}_{c})$ such that, for ${U}_{d}<U<{U}_{c}$, quasiparticle states are destroyed abruptly when ${({\ensuremath{\epsilon}}_{QP}^{0})}^{2}\ensuremath{\sim}a{(\ensuremath{\pi}{k}_{B}{T}_{c})}^{2}+b{\ensuremath{\Phi}}_{c}^{2}$ with the critical temperature ${T}_{c}$, the critical bias ${\ensuremath{\Phi}}_{c}$, and the numerical constants $a$ and $b$ on the order of unity.

arXiv:0904.3521•Physical Review B•Jul 1, 2009•4 citations

Metallic surface of a Mott insulator–Mott insulating surface of a metal

Michael Potthoff, Wolfgang Nolting

The dynamical mean-field theory (DMFT) is employed to study the correlation-driven metal-insulator transition in the semi-infinite Hubbard model at half-filling and zero temperature. We consider the low-index surfaces of the three-dimensional simple-cubic lattice, and systematically vary the model parameters at the very surface, the intralayer and interlayer surface hopping, and the surface Coulomb interaction. Within the DMFT the self-energy functional is assumed to be local. Therewith, the problem is self-consistently mapped onto a set of coupled effective impurity models corresponding to the inequivalent layers parallel to the surface. Assuming that the influence of the high-energy Hubbard bands on the low-energy quasiparticle resonance can be neglected at the critical point, a simplified ``linearized DMFT'' becomes possible. The linearized theory, however, is formally equivalent to the Weiss molecular-field theory for the semi-infinite Ising model. This implies that qualitatively the rich phenomenology of the Landau description of second-order phase transitions at surfaces has a direct analog for the surface Mott transition. Motivated by this formal analogy, we work out the predictions of the linearized DMFT in detail. It is found that under certain circumstances the surface of a Mott insulator can be metallic, while a Mott-insulating surface of a normal metal is not possible. We derive the corresponding phase diagrams, the (mean-field) critical exponents and the critical profiles of the quasiparticle weight. The results are confirmed by a fully numerical evaluation of the DMFT equations using the exact-diagonalization (ED) method. By means of the ED approach, we especially investigate the noncritical parts of the phase diagrams and discuss the U and layer dependence of the quasi-particle weight. For strong modifications of the surface model parameters, the surface low-energy electronic structure dynamically decouples from the bulk.

arXiv:cond-mat/9906412•Physical review. B, Condensed matter•Sep 15, 1999•100 citations

Signatures of coherent electronic quasiparticles in the paramagnetic Mott insulator

Mats Granath, Johan Schött

We study the Mott insulating state of the half-filled paramagnetic Hubbard model within dynamical mean field theory using a recently formulated stochastic and nonperturbative quantum impurity solver. The method is based on calculating the impurity self energy as a sample average over a representative distribution of impurity models solved by exact diagonalization. Due to the natural parallelization of the method, millions of poles are readily generated for the self energy which allows us to work with very small pole-broadening $\ensuremath{\eta}$. Solutions at small and large $\ensuremath{\eta}$ are qualitatively different; solutions at large $\ensuremath{\eta}$ show featureless Hubbard bands whereas solutions at small $\ensuremath{\eta}\ensuremath{\le}0.001$ (in units of half bare band width) show a band of electronic quasiparticles with very small quasiparticle weight at the inner edge of the Hubbard bands. The validity of the results are supported by agreement within statistical error ${\ensuremath{\sigma}}_{\text{QMC}}\ensuremath{\sim}{10}^{\ensuremath{-}4}$ on the imaginary frequency axis with calculations using a continuous time quantum Monte Carlo solver. Nevertheless, convergence with respect to finite size of the stochastic exact diagonalization solver remains to be rigourously established.

arXiv:1404.1885•Physical Review B•Dec 17, 2014•16 citations

Evolution of Electronic Structure of Doped Mott Insulators: Reconstruction of Poles and Zeros of Green’s Function

志朗 酒井, Yukitoshi Motome, Masatoshi Imada

We study the evolution of metals from Mott insulators in the carrier-doped 2D Hubbard model using a cluster extension of the dynamical mean-field theory. While the conventional metal is simply characterized by the Fermi surface (pole of the Green function G), interference of the zero surfaces of G with the pole surfaces becomes crucial in the doped Mott insulators. Mutually interfering pole and zero surfaces are dramatically transferred over the Mott gap, when lightly doped holes synergetically loosen the doublon-holon binding. The heart of the Mott physics such as the pseudogap, hole pockets, Fermi arcs, in-gap states, Lifshitz transitions, and non-Fermi liquids appears as natural consequences of this global interference in the frequency space.

arXiv:0809.0950•Physical Review Letters•Feb 4, 2009•211 citations

Characterizing Featureless Mott Insulating State by Quasiparticle Interferences - A DMFT Prospect

Shantanu Mukherjee, Wei‐Cheng Lee

Bulletin of the American Physical Society•Mar 16, 2016•0 citations

Pseudogap and Mott transition studied by cellular dynamical mean-field theory

Yu‐Zhong Zhang, Masatoshi Imada

We study metal-insulator transitions between Mott insulators and metals. The transition mechanism completely different from the original dynamical mean field theory (DMFT) emerges from a cluster extension of it. A consistent picture suggests that the quasiparticle weight $Z$ remains nonzero through metals and suddenly jumps to zero at the transition, while the gap opens continuously in the insulators. This is in contrast with the original DMFT, where $Z$ continuously vanishes but the gap opens discontinuously. The present results arising from electron differentiation in momentum space agree with recent puzzling bulk-sensitive experiments on $\mathrm{Ca}\mathrm{V}{\mathrm{O}}_{3}$ and $\mathrm{Sr}\mathrm{V}{\mathrm{O}}_{3}$.

arXiv:0706.0444•Physical Review B•Jul 17, 2007•89 citations
The quasiparticle interferences (QPIs) of the featureless Mott insulators are investigated by a TTT-matrix formalism implemented with the dynamical mean field theory (TTT-DMFT). In the Mott insulating state, due to the singularity at zero frequency in the real part of the electron self-energy [Re\ensuremathΣ(\ensuremathω)\ensuremath∼\ensuremathη/\ensuremathω][\mathrm{Re}\mathrm{\ensuremath{\Sigma}}(\ensuremath{\omega})\ensuremath{\sim}\ensuremath{\eta}/\ensuremath{\omega}][Re\ensuremathΣ(\ensuremathω)\ensuremath∼\ensuremathη/\ensuremathω] predicted by DMFT, where \ensuremathη\ensuremath{\eta}\ensuremathη can be considered as the ``order parameter'' for the Mott insulating state, QPIs are completely washed out at small bias voltages. However, a further analysis shows that Re\ensuremathΣ(\ensuremathω)\mathrm{Re}\mathrm{\ensuremath{\Sigma}}(\ensuremath{\omega})Re\ensuremathΣ(\ensuremathω) serves as an energy-dependent chemical potential shift. As a result, the effective bias voltage seen by the system is eV\ensuremath′=eV\ensuremath−Re\ensuremathΣ(eV)e{V}^{\ensuremath{'}}=eV\ensuremath{-}\mathrm{Re}\mathrm{\ensuremath{\Sigma}}(eV)eV\ensuremath′=eV\ensuremath−Re\ensuremathΣ(eV), which leads to a critical bias voltage eVc\ensuremath∼\ensuremathηe{V}_{c}\ensuremath{\sim}\sqrt{\ensuremath{\eta}}eVc​\ensuremath∼\ensuremathη​ satisfying eV\ensuremath′=0e{V}^{\ensuremath{'}}=0eV\ensuremath′=0 if and only if \ensuremathη\ensuremath{\eta}\ensuremathη is nonzero. Consequently, the same QPI patterns produced by the noninteracting Fermi surfaces appear at this critical bias voltage eVce{V}_{c}eVc​ in the Mott insulating state. We propose that this reentry of noninteracting QPI patterns at eVce{V}_{c}eVc​ could serve as an experimental signature of the Mott insulating state, and the order parameter can be experimentally measured as \ensuremathη\ensuremath∼(eVc)2\ensuremath{\eta}\ensuremath{\sim}{(e{V}_{c})}^{2}\ensuremathη\ensuremath∼(eVc​)2.
A model for nonequilibrium dynamical mean-field theory is constructed for the infinite-dimensional Hubbard lattice. We impose nonequilibrium by expressing the physical orbital as a superposition of a left (L)(L)(L)-moving and right (R)(R)(R)-moving electronic state with the respective chemical potentials ${\ensuremath{\mu}}_{L}$ and ${\ensuremath{\mu}}_{R}$. Using the second-order iterative perturbation theory we calculate the quasiparticle properties as a function of the chemical potential bias between the LLL and RRR movers, i.e., $\ensuremath{\Phi}={\ensuremath{\mu}}_{L}\ensuremath{-}{\ensuremath{\mu}}_{R}$. The evolution of the nonequilibrium quasiparticle spectrum is mapped out as a function of the bias and temperature. The quasiparticle states with the renormalized Fermi-energy scale ${\ensuremath{\epsilon}}_{QP}^{0}$ disappear at $\ensuremath{\Phi}\ensuremath{\sim}{\ensuremath{\epsilon}}_{QP}^{0}$ in the low-temperature limit. The second-order perturbation theory predicts that in the vicinity of the Mott-insulator transition at the Coulomb-parameter U=UcU={U}_{c}U=Uc​, there exists another critical Coulomb-parameter Ud{U}_{d}Ud​ (<Uc)(<{U}_{c})(<Uc​) such that, for Ud<U<Uc{U}_{d}<U<{U}_{c}Ud​<U<Uc​, quasiparticle states are destroyed abruptly when ${({\ensuremath{\epsilon}}_{QP}^{0})}^{2}\ensuremath{\sim}a{(\ensuremath{\pi}{k}_{B}{T}_{c})}^{2}+b{\ensuremath{\Phi}}_{c}^{2}$ with the critical temperature Tc{T}_{c}Tc​, the critical bias ${\ensuremath{\Phi}}_{c}$, and the numerical constants aaa and bbb on the order of unity.
The dynamical mean-field theory (DMFT) is employed to study the correlation-driven metal-insulator transition in the semi-infinite Hubbard model at half-filling and zero temperature. We consider the low-index surfaces of the three-dimensional simple-cubic lattice, and systematically vary the model parameters at the very surface, the intralayer and interlayer surface hopping, and the surface Coulomb interaction. Within the DMFT the self-energy functional is assumed to be local. Therewith, the problem is self-consistently mapped onto a set of coupled effective impurity models corresponding to the inequivalent layers parallel to the surface. Assuming that the influence of the high-energy Hubbard bands on the low-energy quasiparticle resonance can be neglected at the critical point, a simplified ``linearized DMFT'' becomes possible. The linearized theory, however, is formally equivalent to the Weiss molecular-field theory for the semi-infinite Ising model. This implies that qualitatively the rich phenomenology of the Landau description of second-order phase transitions at surfaces has a direct analog for the surface Mott transition. Motivated by this formal analogy, we work out the predictions of the linearized DMFT in detail. It is found that under certain circumstances the surface of a Mott insulator can be metallic, while a Mott-insulating surface of a normal metal is not possible. We derive the corresponding phase diagrams, the (mean-field) critical exponents and the critical profiles of the quasiparticle weight. The results are confirmed by a fully numerical evaluation of the DMFT equations using the exact-diagonalization (ED) method. By means of the ED approach, we especially investigate the noncritical parts of the phase diagrams and discuss the U and layer dependence of the quasi-particle weight. For strong modifications of the surface model parameters, the surface low-energy electronic structure dynamically decouples from the bulk.
We study the Mott insulating state of the half-filled paramagnetic Hubbard model within dynamical mean field theory using a recently formulated stochastic and nonperturbative quantum impurity solver. The method is based on calculating the impurity self energy as a sample average over a representative distribution of impurity models solved by exact diagonalization. Due to the natural parallelization of the method, millions of poles are readily generated for the self energy which allows us to work with very small pole-broadening $\ensuremath{\eta}$. Solutions at small and large $\ensuremath{\eta}$ are qualitatively different; solutions at large $\ensuremath{\eta}$ show featureless Hubbard bands whereas solutions at small $\ensuremath{\eta}\ensuremath{\le}0.001$ (in units of half bare band width) show a band of electronic quasiparticles with very small quasiparticle weight at the inner edge of the Hubbard bands. The validity of the results are supported by agreement within statistical error ${\ensuremath{\sigma}}_{\text{QMC}}\ensuremath{\sim}{10}^{\ensuremath{-}4}$ on the imaginary frequency axis with calculations using a continuous time quantum Monte Carlo solver. Nevertheless, convergence with respect to finite size of the stochastic exact diagonalization solver remains to be rigourously established.
We study the evolution of metals from Mott insulators in the carrier-doped 2D Hubbard model using a cluster extension of the dynamical mean-field theory. While the conventional metal is simply characterized by the Fermi surface (pole of the Green function G), interference of the zero surfaces of G with the pole surfaces becomes crucial in the doped Mott insulators. Mutually interfering pole and zero surfaces are dramatically transferred over the Mott gap, when lightly doped holes synergetically loosen the doublon-holon binding. The heart of the Mott physics such as the pseudogap, hole pockets, Fermi arcs, in-gap states, Lifshitz transitions, and non-Fermi liquids appears as natural consequences of this global interference in the frequency space.
We study metal-insulator transitions between Mott insulators and metals. The transition mechanism completely different from the original dynamical mean field theory (DMFT) emerges from a cluster extension of it. A consistent picture suggests that the quasiparticle weight ZZZ remains nonzero through metals and suddenly jumps to zero at the transition, while the gap opens continuously in the insulators. This is in contrast with the original DMFT, where ZZZ continuously vanishes but the gap opens discontinuously. The present results arising from electron differentiation in momentum space agree with recent puzzling bulk-sensitive experiments on CaVO3\mathrm{Ca}\mathrm{V}{\mathrm{O}}_{3}CaVO3​ and SrVO3\mathrm{Sr}\mathrm{V}{\mathrm{O}}_{3}SrVO3​.