Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:cond-mat/9906412 · Physical review. B, Condensed matter

Metallic surface of a Mott insulator–Mott insulating surface of a metal

Michael Potthoff, Wolfgang Nolting

Published Sep 15, 1999• 100 citations
arXivHTMLPDF

Abstract

The dynamical mean-field theory (DMFT) is employed to study the correlation-driven metal-insulator transition in the semi-infinite Hubbard model at half-filling and zero temperature. We consider the low-index surfaces of the three-dimensional simple-cubic lattice, and systematically vary the model parameters at the very surface, the intralayer and interlayer surface hopping, and the surface Coulomb interaction. Within the DMFT the self-energy functional is assumed to be local. Therewith, the problem is self-consistently mapped onto a set of coupled effective impurity models corresponding to the inequivalent layers parallel to the surface. Assuming that the influence of the high-energy Hubbard bands on the low-energy quasiparticle resonance can be neglected at the critical point, a simplified ``linearized DMFT'' becomes possible. The linearized theory, however, is formally equivalent to the Weiss molecular-field theory for the semi-infinite Ising model. This implies that qualitatively the rich phenomenology of the Landau description of second-order phase transitions at surfaces has a direct analog for the surface Mott transition. Motivated by this formal analogy, we work out the predictions of the linearized DMFT in detail. It is found that under certain circumstances the surface of a Mott insulator can be metallic, while a Mott-insulating surface of a normal metal is not possible. We derive the corresponding phase diagrams, the (mean-field) critical exponents and the critical profiles of the quasiparticle weight. The results are confirmed by a fully numerical evaluation of the DMFT equations using the exact-diagonalization (ED) method. By means of the ED approach, we especially investigate the noncritical parts of the phase diagrams and discuss the U and layer dependence of the quasi-particle weight. For strong modifications of the surface model parameters, the surface low-energy electronic structure dynamically decouples from the bulk.

DOI
10.1103/physrevb.60.7834

Related papers

Mott-Hubbard transition and Anderson localization: A generalized dynamical mean-field theory approach

E. Z. Kuchinskii, I. A. Nekrasov, M. V. Sadovskii

The DOS, the dynamic (optical) conductivity, and the phase diagram of a strongly correlated and strongly disordered paramagnetic Anderson-Hubbard model are analyzed within the generalized dynamical mean field theory (DMFT + Σ approximation). Strong correlations are taken into account by the DMFT, and disorder is taken into account via an appropriate generalization of the self-consistent theory of localization. The DMFT effective single-impurity problem is solved by a numerical renormalization group (NRG); we consider the three-dimensional system with a semielliptic DOS. The correlated metal, Mott insulator, and correlated Anderson insulator phases are identified via the evolution of the DOS and dynamic conductivity, demonstrating both the Mott-Hubbard and Anderson metal-insulator transition and allowing the construction of the complete zero-temperature phase diagram of the Anderson-Hubbard model. Rather unusual is the possibility of a disorder-induced Mott insulator-to-metal transition.

arXiv:0706.2618•Journal of Experimental and Theoretical Physics•Mar 1, 2008•24 citations

Dynamical density-matrix renormalization group for the Mott–Hubbard insulator in high dimensions

Satoshi Nishimoto, Florian Gebhard, Eric Jeckelmann

We study the Hubbard model at half band-filling on a Bethe lattice with infinite coordination number in the paramagnetic insulating phase at zero temperature. We use the dynamical mean-field theory (DMFT) mapping to a single-impurity Anderson model with a bath whose properties have to be determined self-consistently. For a controlled and systematic implementation of the self-consistency scheme we use the fixed-energy (FE) approach to the DMFT. In FE-DMFT the onset and the width of the Hubbard bands are adjusted self-consistently but the energies of the bath levels are kept fixed relatively to both band edges during the calculation of self-consistent hybridization strengths between impurity and bath sites. Using the dynamical density-matrix renormalization group method (DDMRG) we calculate the density of states with a resolution ranging from 3% of the bare bandwidth $W=4t$ at high energies to 0.5% in the vicinity of the gap. The DDMRG resolution and accuracy for the density of states and the gap is superior to those obtained with other numerical methods in previous DMFT investigations. We find that the Mott gap closes at a critical coupling $U_{\rm c}/t=4.45 \pm 0.05$. At $U=4.5t$, we observe prominent shoulders near the onset of the Hubbard bands. They are the remainders of the quasi-particle resonance in the metallic phase which appears to split when the gap opens at $U_{\rm c}$.

arXiv:cond-mat/0406666•Journal of Physics Condensed Matter•Sep 21, 2004•60 citations

Mott physics and first-order transition between two metals in the normal-state phase diagram of the two-dimensional Hubbard model

G. Sordi, Kristjan Haule, A.–M. S. Tremblay

For doped two-dimensional Mott insulators in their normal state, the challenge is to understand the evolution from a conventional metal at high doping to a strongly correlated metal near the Mott insulator at zero doping. To this end, we solve the cellular dynamical mean-field equations for the two-dimensional Hubbard model using a plaquette as the reference quantum impurity model and continuous-time quantum Monte Carlo method as impurity solver. The normal-state phase diagram as a function of interaction strength $U$, temperature $T$, and filling $n$ shows that, upon increasing $n$ toward the Mott insulator, there is a surface of first-order transition between two metals at nonzero doping. That surface ends at a finite temperature critical line originating at the half-filled Mott critical point. Associated with this transition, there is a maximum in scattering rate as well as thermodynamic signatures. These findings suggest a new scenario for the normal-state phase diagram of the high temperature superconductors. The criticality surmised in these systems can originate not from a T $=$ 0 quantum critical point, nor from the proximity of a long-range ordered phase, but from a low temperature transition between two types of metals at finite doping. The influence of Mott physics therefore extends well beyond half-filling.

arXiv:1102.0463•Physical Review B•Aug 17, 2011•98 citations

Mott Physics in Multicomponent Systems

김아람

We investigate Hubbard-type models by means of the dynamical mean-field theory (DMFT) combined with the continuous-time quantum Monte Carlo (CTQMC) method. In this thesis, a great deal of effort has been devoted to investigating diverse facets of Mott physics. Interesting phenomena in strongly correlated electron systems emerge mostly when various energy scales compete with each other. We introduce additional degrees of freedom to the standard Hubbard model. The additional degrees of freedom include a staggered lattice potential, two orbitals, bilayer structure, and superconductivity. Depending on the model system, we extend the single-site DMFT to the multi-orbital one or employ cluster extension of the DMFT. In addition, two complementary versions of CTQMC, weak and strong coupling algorithm, are adopted as an impurity solver.\nWe first consider a Mott transition of the Hubbard model in infinite dimensions. The DMFT is employed in combination with the CTQMC method for an accurate description at low temperatures. Through the use of the double occupancy and the energy density, which are directly measured via the CTQMC method, we construct the phase diagram. We pay particular attention to the construction of the first-order phase transition line (PTL) in the coexistence region of metallic and insulating phases. The resulting PTL is found to exhibit reasonable agreement with earlier finite-temperature results. We also show, by including systematically low-temperature data, that the PTL, which is obtained independently of the previous zero-temperature results, approaches monotonically the transition point reported in earlier zero-temperature studies.\nWe next investigate paramagnetic metal-insulator transitions in the infinite-dimensional ionic Hubbard model at finite temperatures. By means of the DMFT with an impurity solver of the CTQMC, we show that an increase in the interaction strength brings about a crossover from a band insulating phase to a metallic one, followed by a first-order transition to the Mott insulating phase. The first-order transition turns into a crossover above a certain critical temperature, which becomes higher as the strength of the staggered lattice potential is increased. Further, analysis of the temperature dependence of the energy density discloses that the intermediate metallic phase is a Fermi liquid. It is also found that the metallic phase is stable against strong staggered potentials even at very low temperatures. \nFinite-temperature phase transitions are also examined in the two-orbital Hubbard model with Ising-type Hunds coupling. We adopt the multi-orbital extension of the DMFT combined with the strong coupling CTQMC. It is found that there emerges a peculiar reverse-sloped first-order Mott transition between the orbital-selective Mott phase and the Mott insulator phase. It turns out that the increase of Hunds coupling lowers the critical temperature of the reverse-sloped Mott transition. Beyond a certain critical value of Hunds coupling the first-order transition becomes a finite-temperature crossover.\nBilayer effects in the Hubbard model are also studied in the dynamical cluster approximation (DCA) combined with the weak coupling algorithm of CTQMC. In the magnetic phase diagrams obtained in earlier studies, there still remain several controversial issues, particularly for weak on-site Coulomb interactions. In this study, we adopt eight-site clusters which preserve the underlying lattice symmetry. Magnetic properties and associated metal-insulator transitions are examined at low temperatures, and their implications to the ground-state phase diagram are also discussed.\nFinally, we discuss the BCS+U model which is a natural generalization of Gutzwiller-projected BCS model. For this study, we use the DCA combined with the weak coupling CTQMC and verify the reliability of our calculation by changing the cluster size. Our main focus is on the correlation effects of the phenomenological d-wave superconductor. The transition between the superconductor and the Mott insulator is observed as we change the interaction strength or doping concentration. We discuss the change in the spectral properties of the system during the transition.

•Jan 1, 2015•0 citations

Metal-insulator transition in the two-dimensional Hubbard model: Dual fermion approach with Lanczos exact diagonalization

Arata Tanaka

In this study, the metal-insulator transition in the square-lattice Hubbard model at half-filling is revisited in relation to the DOS and spectral functions by means of the ladder dual fermion approximation (LDFA). For this purpose, a new expression of the two-body Green's function in the form of resolvents is proposed, which provides tractable and efficient means to calculate the local vertex function with the Lanczos exact diagonalization (ED) method. This makes it possible to use the Lanczos ED method as a solver of the effective impurity Anderson model for LDFA, opening up the way to access low temperatures for these perturbative extensions of the dynamical mean-field theory and to obtain accurate DOS and spectral functions on the real frequency axis by a new variant of the maximum entropy method. It is found that for $U\ensuremath{\le}3.5t$, as temperature decreases, the pseudogap formation due to antiferromagnetic correlations in the quasiparticle peak of the spectral function occurs at the $X$ point $[\mathbit{k}=(\ensuremath{\pi},0)]$, spreads through the Fermi surface and ends at the ${M}_{2}$ point $[\mathbit{k}=(\ensuremath{\pi}/2,\ensuremath{\pi}/2)]$. The almost simultaneous creation of the pseudogap and the loss of the Fermi liquid feature is consistent with that expected in the Slater regime. Although the pseudogap still appears in the quasi-particle-like single peak for $U\ensuremath{\ge}4.0t$, the Fermi-liquid feature is partially lost on the Fermi surface already at higher temperatures as expected in the Mott-Heisenberg regime, in which local spins are preformed at high temperatures. A sharp crossover from a pseudogap phase to a Mott insulator at finite ${U}^{*}\ensuremath{\approx}4.7t$ is found to occur below the temperature of the pseudogap formation similar to a previous study with the nonlinear $\ensuremath{\sigma}$ model approach.

arXiv:1812.04805•Physical review. B./Physical review. B•May 20, 2019•26 citations

Kondo frustration via charge fluctuations: a route to Mott localisation

Abhirup Mukherjee, N. S. Vidhyadhiraja, A. Taraphder +1 more

Abstract We propose a minimal effective impurity model that captures the phenomenology of the Mott–Hubbard metal–insulator transition of the half-filled Hubbard model on the Bethe lattice in infinite dimensions as observed by dynamical mean field theory (DMFT). This involves extending the standard Anderson impurity model Hamiltonian to include an explicit Kondo coupling J, as well as a local on-site correlation Ub on the conduction bath site connected directly to the impurity. For the case of attractive local bath correlations ( U b < 0 ), the extended Anderson impurity model (e-SIAM) sheds new light on several aspects of the DMFT phase diagram. For example, the T = 0 metal-to-insulator quantum phase transition (QPT) is preceded by an excited state QPT (ESQPT) where the local moment eigenstates are emergent in the low-lying spectrum. Long-ranged fluctuations are observed near both the QPT and ESQPT, suggesting that they are the origin of the quantum critical scaling observed recently at high temperatures in DMFT simulations. The T = 0 gapless excitations at the quantum critical point display particle-hole interconversion processes, and exhibit power-law behaviour in self-energies and two-particle correlations. These are signatures of non-Fermi liquid behaviour that emerge from the partial breakdown of the Kondo screening.

arXiv:2302.02328•New Journal of Physics•Nov 1, 2023•1 citation
The dynamical mean-field theory (DMFT) is employed to study the correlation-driven metal-insulator transition in the semi-infinite Hubbard model at half-filling and zero temperature. We consider the low-index surfaces of the three-dimensional simple-cubic lattice, and systematically vary the model parameters at the very surface, the intralayer and interlayer surface hopping, and the surface Coulomb interaction. Within the DMFT the self-energy functional is assumed to be local. Therewith, the problem is self-consistently mapped onto a set of coupled effective impurity models corresponding to the inequivalent layers parallel to the surface. Assuming that the influence of the high-energy Hubbard bands on the low-energy quasiparticle resonance can be neglected at the critical point, a simplified ``linearized DMFT'' becomes possible. The linearized theory, however, is formally equivalent to the Weiss molecular-field theory for the semi-infinite Ising model. This implies that qualitatively the rich phenomenology of the Landau description of second-order phase transitions at surfaces has a direct analog for the surface Mott transition. Motivated by this formal analogy, we work out the predictions of the linearized DMFT in detail. It is found that under certain circumstances the surface of a Mott insulator can be metallic, while a Mott-insulating surface of a normal metal is not possible. We derive the corresponding phase diagrams, the (mean-field) critical exponents and the critical profiles of the quasiparticle weight. The results are confirmed by a fully numerical evaluation of the DMFT equations using the exact-diagonalization (ED) method. By means of the ED approach, we especially investigate the noncritical parts of the phase diagrams and discuss the U and layer dependence of the quasi-particle weight. For strong modifications of the surface model parameters, the surface low-energy electronic structure dynamically decouples from the bulk.
The DOS, the dynamic (optical) conductivity, and the phase diagram of a strongly correlated and strongly disordered paramagnetic Anderson-Hubbard model are analyzed within the generalized dynamical mean field theory (DMFT + Σ approximation). Strong correlations are taken into account by the DMFT, and disorder is taken into account via an appropriate generalization of the self-consistent theory of localization. The DMFT effective single-impurity problem is solved by a numerical renormalization group (NRG); we consider the three-dimensional system with a semielliptic DOS. The correlated metal, Mott insulator, and correlated Anderson insulator phases are identified via the evolution of the DOS and dynamic conductivity, demonstrating both the Mott-Hubbard and Anderson metal-insulator transition and allowing the construction of the complete zero-temperature phase diagram of the Anderson-Hubbard model. Rather unusual is the possibility of a disorder-induced Mott insulator-to-metal transition.
We study the Hubbard model at half band-filling on a Bethe lattice with infinite coordination number in the paramagnetic insulating phase at zero temperature. We use the dynamical mean-field theory (DMFT) mapping to a single-impurity Anderson model with a bath whose properties have to be determined self-consistently. For a controlled and systematic implementation of the self-consistency scheme we use the fixed-energy (FE) approach to the DMFT. In FE-DMFT the onset and the width of the Hubbard bands are adjusted self-consistently but the energies of the bath levels are kept fixed relatively to both band edges during the calculation of self-consistent hybridization strengths between impurity and bath sites. Using the dynamical density-matrix renormalization group method (DDMRG) we calculate the density of states with a resolution ranging from 3% of the bare bandwidth W=4tW=4tW=4t at high energies to 0.5% in the vicinity of the gap. The DDMRG resolution and accuracy for the density of states and the gap is superior to those obtained with other numerical methods in previous DMFT investigations. We find that the Mott gap closes at a critical coupling Uc/t=4.45±0.05U_{\rm c}/t=4.45 \pm 0.05Uc​/t=4.45±0.05. At U=4.5tU=4.5tU=4.5t, we observe prominent shoulders near the onset of the Hubbard bands. They are the remainders of the quasi-particle resonance in the metallic phase which appears to split when the gap opens at UcU_{\rm c}Uc​.
For doped two-dimensional Mott insulators in their normal state, the challenge is to understand the evolution from a conventional metal at high doping to a strongly correlated metal near the Mott insulator at zero doping. To this end, we solve the cellular dynamical mean-field equations for the two-dimensional Hubbard model using a plaquette as the reference quantum impurity model and continuous-time quantum Monte Carlo method as impurity solver. The normal-state phase diagram as a function of interaction strength UUU, temperature TTT, and filling nnn shows that, upon increasing nnn toward the Mott insulator, there is a surface of first-order transition between two metals at nonzero doping. That surface ends at a finite temperature critical line originating at the half-filled Mott critical point. Associated with this transition, there is a maximum in scattering rate as well as thermodynamic signatures. These findings suggest a new scenario for the normal-state phase diagram of the high temperature superconductors. The criticality surmised in these systems can originate not from a T === 0 quantum critical point, nor from the proximity of a long-range ordered phase, but from a low temperature transition between two types of metals at finite doping. The influence of Mott physics therefore extends well beyond half-filling.
We investigate Hubbard-type models by means of the dynamical mean-field theory (DMFT) combined with the continuous-time quantum Monte Carlo (CTQMC) method. In this thesis, a great deal of effort has been devoted to investigating diverse facets of Mott physics. Interesting phenomena in strongly correlated electron systems emerge mostly when various energy scales compete with each other. We introduce additional degrees of freedom to the standard Hubbard model. The additional degrees of freedom include a staggered lattice potential, two orbitals, bilayer structure, and superconductivity. Depending on the model system, we extend the single-site DMFT to the multi-orbital one or employ cluster extension of the DMFT. In addition, two complementary versions of CTQMC, weak and strong coupling algorithm, are adopted as an impurity solver.\nWe first consider a Mott transition of the Hubbard model in infinite dimensions. The DMFT is employed in combination with the CTQMC method for an accurate description at low temperatures. Through the use of the double occupancy and the energy density, which are directly measured via the CTQMC method, we construct the phase diagram. We pay particular attention to the construction of the first-order phase transition line (PTL) in the coexistence region of metallic and insulating phases. The resulting PTL is found to exhibit reasonable agreement with earlier finite-temperature results. We also show, by including systematically low-temperature data, that the PTL, which is obtained independently of the previous zero-temperature results, approaches monotonically the transition point reported in earlier zero-temperature studies.\nWe next investigate paramagnetic metal-insulator transitions in the infinite-dimensional ionic Hubbard model at finite temperatures. By means of the DMFT with an impurity solver of the CTQMC, we show that an increase in the interaction strength brings about a crossover from a band insulating phase to a metallic one, followed by a first-order transition to the Mott insulating phase. The first-order transition turns into a crossover above a certain critical temperature, which becomes higher as the strength of the staggered lattice potential is increased. Further, analysis of the temperature dependence of the energy density discloses that the intermediate metallic phase is a Fermi liquid. It is also found that the metallic phase is stable against strong staggered potentials even at very low temperatures. \nFinite-temperature phase transitions are also examined in the two-orbital Hubbard model with Ising-type Hunds coupling. We adopt the multi-orbital extension of the DMFT combined with the strong coupling CTQMC. It is found that there emerges a peculiar reverse-sloped first-order Mott transition between the orbital-selective Mott phase and the Mott insulator phase. It turns out that the increase of Hunds coupling lowers the critical temperature of the reverse-sloped Mott transition. Beyond a certain critical value of Hunds coupling the first-order transition becomes a finite-temperature crossover.\nBilayer effects in the Hubbard model are also studied in the dynamical cluster approximation (DCA) combined with the weak coupling algorithm of CTQMC. In the magnetic phase diagrams obtained in earlier studies, there still remain several controversial issues, particularly for weak on-site Coulomb interactions. In this study, we adopt eight-site clusters which preserve the underlying lattice symmetry. Magnetic properties and associated metal-insulator transitions are examined at low temperatures, and their implications to the ground-state phase diagram are also discussed.\nFinally, we discuss the BCS+U model which is a natural generalization of Gutzwiller-projected BCS model. For this study, we use the DCA combined with the weak coupling CTQMC and verify the reliability of our calculation by changing the cluster size. Our main focus is on the correlation effects of the phenomenological d-wave superconductor. The transition between the superconductor and the Mott insulator is observed as we change the interaction strength or doping concentration. We discuss the change in the spectral properties of the system during the transition.
In this study, the metal-insulator transition in the square-lattice Hubbard model at half-filling is revisited in relation to the DOS and spectral functions by means of the ladder dual fermion approximation (LDFA). For this purpose, a new expression of the two-body Green's function in the form of resolvents is proposed, which provides tractable and efficient means to calculate the local vertex function with the Lanczos exact diagonalization (ED) method. This makes it possible to use the Lanczos ED method as a solver of the effective impurity Anderson model for LDFA, opening up the way to access low temperatures for these perturbative extensions of the dynamical mean-field theory and to obtain accurate DOS and spectral functions on the real frequency axis by a new variant of the maximum entropy method. It is found that for $U\ensuremath{\le}3.5t$, as temperature decreases, the pseudogap formation due to antiferromagnetic correlations in the quasiparticle peak of the spectral function occurs at the XXX point $[\mathbit{k}=(\ensuremath{\pi},0)]$, spreads through the Fermi surface and ends at the M2{M}_{2}M2​ point $[\mathbit{k}=(\ensuremath{\pi}/2,\ensuremath{\pi}/2)]$. The almost simultaneous creation of the pseudogap and the loss of the Fermi liquid feature is consistent with that expected in the Slater regime. Although the pseudogap still appears in the quasi-particle-like single peak for $U\ensuremath{\ge}4.0t$, the Fermi-liquid feature is partially lost on the Fermi surface already at higher temperatures as expected in the Mott-Heisenberg regime, in which local spins are preformed at high temperatures. A sharp crossover from a pseudogap phase to a Mott insulator at finite ${U}^{*}\ensuremath{\approx}4.7t$ is found to occur below the temperature of the pseudogap formation similar to a previous study with the nonlinear $\ensuremath{\sigma}$ model approach.
Abstract We propose a minimal effective impurity model that captures the phenomenology of the Mott–Hubbard metal–insulator transition of the half-filled Hubbard model on the Bethe lattice in infinite dimensions as observed by dynamical mean field theory (DMFT). This involves extending the standard Anderson impurity model Hamiltonian to include an explicit Kondo coupling J, as well as a local on-site correlation Ub on the conduction bath site connected directly to the impurity. For the case of attractive local bath correlations ( U b < 0 ), the extended Anderson impurity model (e-SIAM) sheds new light on several aspects of the DMFT phase diagram. For example, the T = 0 metal-to-insulator quantum phase transition (QPT) is preceded by an excited state QPT (ESQPT) where the local moment eigenstates are emergent in the low-lying spectrum. Long-ranged fluctuations are observed near both the QPT and ESQPT, suggesting that they are the origin of the quantum critical scaling observed recently at high temperatures in DMFT simulations. The T = 0 gapless excitations at the quantum critical point display particle-hole interconversion processes, and exhibit power-law behaviour in self-energies and two-particle correlations. These are signatures of non-Fermi liquid behaviour that emerge from the partial breakdown of the Kondo screening.