By coupling pairs of superconducting qubits through a small Josephson junction with a time-dependent flux bias, we show that arbitrary interactions involving any combination of Pauli matrices can be generated with a small number of drive tones applied through the flux bias of the coupling junction. We then demonstrate that similar (though not fully universal) results can be achieved in capacitively coupled qubits by exploiting the higher energy states of the devices through multiphoton drive signals applied to the qubits' flux degrees of freedom. By using this mechanism to couple a qubit to a detuned resonator, the qubit's rotating-frame state can be nondestructively measured along any direction on the Bloch sphere. Finally, we describe how the frequency-converting nature of the couplings can be used to engineer a mechanism analogous to dynamic nuclear polarization in NMR systems, capable of cooling an array of qubits well below the ambient temperature, and outline how higher-order interactions, such as local three-body terms, can be engineered through the same couplings. Our results demonstrate that a programmable quantum simulator for large classes of interacting spin models could be engineered with the same physical hardware.
By coupling pairs of superconducting qubits through a small Josephson junction with a time-dependent flux bias, we show that arbitrary interactions involving any combination of Pauli matrices can be generated with a small number of drive tones applied through the flux bias of the coupling junction. We then demonstrate that similar (though not fully universal) results can be achieved in capacitively coupled qubits by exploiting the higher energy states of the devices through multiphoton drive signals applied to the qubits' flux degrees of freedom. By using this mechanism to couple a qubit to a detuned resonator, the qubit's rotating-frame state can be nondestructively measured along any direction on the Bloch sphere. Finally, we describe how the frequency-converting nature of the couplings can be used to engineer a mechanism analogous to dynamic nuclear polarization in NMR systems, capable of cooling an array of qubits well below the ambient temperature, and outline how higher-order interactions, such as local three-body terms, can be engineered through the same couplings. Our results demonstrate that a programmable quantum simulator for large classes of interacting spin models could be engineered with the same physical hardware.
We analyze the coupling of two flux qubits with a general many-body projector into the low-energy subspace. Specifically, we extract the effective Hamiltonians that controls the dynamics of two qubits when they are coupled via a capacitor and/or via a Josephson junction. While the capacitor induces a static charge coupling tunable by design, the Josephson junction produces a magnetic-like interaction easily tunable by replacing the junction with a superconducting quantum interference device. Those two elements allow to engineer qubits Hamiltonians with XX, YY, and ZZ interactions, including ultrastrongly coupled ones. We present an exhaustive numerical study for two three-Josephson junctions flux qubit that can be directly used in experimental work. The method developed here, namely, the numerical tool to extract qubit effective Hamiltonians at strong coupling, can be applied to replicate our analysis for general systems of many qubits and any type of coupling.
The theory of superconducting phase qubits---also known as current-biased Josephson junctions---is presented. In the first part of this thesis, I introduce quantum computation, quantum simulation, and their deep connection with symplectic integration. I then consider the fundamental many-body theory of superconductivity and Josephson junctions and show how the quantum dynamics of a single macroscopic degree of freedom, the gauge invariant phase difference, emerges. A complete study of the Hilbert space structure of such a variable is performed for the current-biased junction. The resulting resonance structure is studied in detail, using various formalisms including the WKB approximation, instanton methods, the complex scaling transformation, basis set stabilization, numerical integration, and dynamical simulation using Lie algebraic wave-packet propagation. The second part of this thesis explores how the current-biased junction can be used as an element of a quantum computer---a quantum bit (qubit). Single qubit operations are studied, followed by the presentation of the theory of coupled qubit devices. My key result is the design and optimization of quantum logic gates with high fidelity (F ~ 0.9999) for capacitively coupled phase qubits with short gate times (~ 10 ns). Finally, I examine an advanced qubit-coupling scheme, a resonant coupling method utilizing a harmonic oscillator as the auxiliary degree of freedom. The models and methods presented here have been developed in direct collaboration with an experimental program. These experiments are the first to show spectroscopic evidence for entanglement between two and three macroscopic degrees of freedom in a superconducting circuit.
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.
Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.
Superconducting qubits provide a competitive platform for quantum simulation of complex dynamics that lies at the heart of quantum many-body systems, because of the flexibility and scalability afforded by the nature of microfabrication. However, in a multiqubit device, the physical form of couplings between qubits is either an electric (capacitor) or magnetic field (inductor), and the associated quadratic field energy determines that only two-body interaction in the Hamiltonian can be directly realized. Here, we propose and experimentally synthesize a three-body spin-chirality interaction in a superconducting circuit based on Floquet engineering. By periodically modulating the resonant frequencies of the qubits connected with each other via capacitors, we can dynamically turn on and off qubit–qubit couplings and further create chiral flows of the excitations in the three-qubit circular loop. Our result is a step toward engineering dynamical and many-body interactions in multiqubit superconducting devices, which potentially expands the degree of freedom in quantum simulation tasks.
I studied the Josephson junction system in the context of its usability for quan-tum computation. The zero-voltage state of a Josephson junction biased with constant current has a set of metastable quantum energy levels. In principle, it should be possible to use the two lowest states as a qubit for a quantum computer, provided both the dissipation time and coherence time of this qubit can be made long enough. I describe two methods for isolating a Josephson junction to increase its dissipation time. The rst is a resistive isolation scheme, for which I fabricated and measured a prototype system. I discuss the results of these measurements and show that the constraints of heating in conjunction with high-frequency design require-ments make it unlikely that this isolation method will lead to the coherence times required for quantum computation. I then discuss a resonant isolation method that I used to successfully increase the dissipation time of a Josephson junction qubit. I performed spectroscopic mea-surements at low temperatures to nd the coherence time of resonantly isolated 100 m2 Al/AlOx/Al and Nb/AlOx/Nb junctions with critical currents of roughly 10 A. The results of these measurements reveal two mechanisms beyond spontaneous emission for decoherence: low-frequency current noise and tunneling to the voltage state. To explain these results on decoherence, I present a model based on the Bloch equations. Going beyond a single qubit, I designed a capacitively coupled two-qubit system. Using spectroscopy, I showed that the energy level spacings between the ground state and the excited entangled states of the system agree with those calculated from the Schrodinger equation.