Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1410.4293 · Applied Physics Letters

Observation of the fundamental Nyquist noise limit in an ultra-high Q-factor cryogenic bulk acoustic wave cavity

Maxim Goryachev, Eugene N. Ivanov, Frank J. van Kann, Serge Galliou, Michael Edmund Tobar

Published Oct 13, 2014• 37 citations
arXivHTMLPDF

Abstract

Thermal Nyquist noise fluctuations of high-Q bulk acoustic wave cavities have been observed at cryogenic temperatures with a DC superconducting quantum interference device amplifier. High Q modes with bandwidths of few tens of milliHz produce thermal fluctuations with a signal-to-noise ratio of up to 23 dB. The estimated effective temperature from the Nyquist noise is in good agreement with the physical temperature of the device, confirming the validity of the equivalent circuit model and the non-existence of any excess resonator self-noise. The measurements also confirm that the quality factor remains extremely high (Q > 108 at low order overtones) for very weak (thermal) system motion at low temperatures, when compared to values measured with relatively strong external excitation. This result represents an enabling step towards operating such a high-Q acoustic device at the standard quantum limit.

DOI
10.1063/1.4898813

Related papers

Radio-frequency amplifier with tenth-kelvin noise temperature based on a microstrip direct current superconducting quantum interference device

Marc-Olivier André, Michael Mück, John L. Clarke +2 more

A dc superconducting quantum interference device (SQUID) with a resonant microstrip input and a cooled heterostructure field-effect transistor as a postamplifier is used as a radio-frequency amplifier in the frequency range 90–500 MHz. At liquid He3 temperatures, gains of 24 and 20 dB and intrinsic noise temperatures of 0.06±0.02 and 0.12±0.10 K were achieved at 89.6 and 438 MHz, respectively. The system noise temperature at 438 MHz was also estimated from the Nyquist noise produced by a resonant circuit coupled to the input of the microstrip SQUID.

Applied Physics Letters•Aug 2, 1999•38 citations

Extremely high Q-factor mechanical modes in quartz bulk acoustic wave resonators at millikelvin temperature

Maxim Goryachev, Daniel Lloyd Creedon, Eugene N. Ivanov +3 more

We demonstrate that Bulk Acoustic Wave (BAW) quartz resonator cooled down to millikelvin temperatures are excellent building blocks for hybrid quantum systems with extremely long coherence times. Two overtones of the longitudinal mode at frequencies of 15.6 and 65.4 MHz demonstrate a maximum f.Q product of 7.8×1016 Hz. With this result, the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained in other mechanical systems. Tested quartz resonators possess the ultra low acoustic losses crucial for electromagnetic cooling to the phonon ground state.

AIP conference proceedings•Jan 1, 2014•2 citations

Superconducting microstrip amplifiers with sub-Kelvin noise temperature near 4 GHz

M. P. DeFeo, B. L. T. Plourde

We present measurements of an amplifier operating at 3.8 GHz with 150 MHz of bandwidth based on the microstrip input-coil resonance of a dc superconducting quantum interference device (SQUID) with submicron Josephson junctions. The noise temperature is measured using two methods: comparing the signal-to-noise ratio of the system with and without the SQUID in the amplifier chain, and using a modified Y-factor technique where calibrated narrowband noise is mixed up to the SQUID amplifier operating frequency. With the SQUID cooled to 0.35 K, we observe a minimum system noise temperature of 0.55 ± 0.13 K, dominated by the contribution from the SQUID amplifier.

arXiv:1206.2235•Applied Physics Letters•Jul 30, 2012•11 citations

Superconducting quantum interference device as a near-quantum-limited amplifier at 0.5 GHz

Michael Mück, Jan B. Kycia, John L. Clarke

A dc superconducting quantum interference device (SQUID) with a resonant microstrip input is operated as an amplifier at temperatures down to 20 mK. A second SQUID is used as a postamplifier. Below about 100 mK, the noise temperature is 52±20 mK at 538 MHz, estimated from measurements of signal-to-noise ratio, and 47±10 mK at 519 MHz, estimated from the noise generated by a resonant circuit coupled to the input. The quantum-limited noise temperatures are 26 and 25 mK, respectively. The measured noise temperature is limited by hot electrons generated by the bias current.

Applied Physics Letters•Feb 12, 2001•118 citations

Back action of a low noise dc SQUID

P. Falferi, M. Bonaldi, MASSIMO CERDONIO +2 more

Measurements are presented of the back action of a low noise commercial dc superconducting quantum interference device (SQUID) on a strongly-coupled high-quality factor (Q≈106) electrical LC resonator operating at audio frequencies (≈1 kHz). The back-action effect, due to the voltage noise of the SQUID current amplifier, is in good agreement with the predictions. The value of the noise impedance of the SQUID coincides, within 5%, with its input coil inductance times the angular frequency.

Applied Physics Letters•Dec 14, 1998•14 citations

Extremely low-loss acoustic phonons in a quartz bulk acoustic wave resonator at millikelvin temperature

Maxim Goryachev, Daniel Lloyd Creedon, Eugene N. Ivanov +3 more

Low-loss, high frequency acoustic resonators cooled to millikelvin temperatures are a topic of great interest for application to hybrid quantum systems. When cooled to 20 mK, we show that resonant acoustic phonon modes in a bulk acoustic wave quartz resonator demonstrate exceptionally low loss (with Q-factors of order billions) at frequencies of 15.6 and 65.4 MHz, with a maximum f · Q product of 7.8 × 1016 Hz. Given this result, we show that the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained. Such resonators possess the low losses crucial for electromagnetic cooling to the phonon ground state, and the possibility of long coherence and interaction times of a few seconds, allowing multiple quantum gate operations.

arXiv:1202.4556•Applied Physics Letters•Jun 11, 2012•87 citations
Thermal Nyquist noise fluctuations of high-Q bulk acoustic wave cavities have been observed at cryogenic temperatures with a DC superconducting quantum interference device amplifier. High Q modes with bandwidths of few tens of milliHz produce thermal fluctuations with a signal-to-noise ratio of up to 23 dB. The estimated effective temperature from the Nyquist noise is in good agreement with the physical temperature of the device, confirming the validity of the equivalent circuit model and the non-existence of any excess resonator self-noise. The measurements also confirm that the quality factor remains extremely high (Q > 108 at low order overtones) for very weak (thermal) system motion at low temperatures, when compared to values measured with relatively strong external excitation. This result represents an enabling step towards operating such a high-Q acoustic device at the standard quantum limit.
A dc superconducting quantum interference device (SQUID) with a resonant microstrip input and a cooled heterostructure field-effect transistor as a postamplifier is used as a radio-frequency amplifier in the frequency range 90–500 MHz. At liquid He3 temperatures, gains of 24 and 20 dB and intrinsic noise temperatures of 0.06±0.02 and 0.12±0.10 K were achieved at 89.6 and 438 MHz, respectively. The system noise temperature at 438 MHz was also estimated from the Nyquist noise produced by a resonant circuit coupled to the input of the microstrip SQUID.
We demonstrate that Bulk Acoustic Wave (BAW) quartz resonator cooled down to millikelvin temperatures are excellent building blocks for hybrid quantum systems with extremely long coherence times. Two overtones of the longitudinal mode at frequencies of 15.6 and 65.4 MHz demonstrate a maximum f.Q product of 7.8×1016 Hz. With this result, the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained in other mechanical systems. Tested quartz resonators possess the ultra low acoustic losses crucial for electromagnetic cooling to the phonon ground state.
We present measurements of an amplifier operating at 3.8 GHz with 150 MHz of bandwidth based on the microstrip input-coil resonance of a dc superconducting quantum interference device (SQUID) with submicron Josephson junctions. The noise temperature is measured using two methods: comparing the signal-to-noise ratio of the system with and without the SQUID in the amplifier chain, and using a modified Y-factor technique where calibrated narrowband noise is mixed up to the SQUID amplifier operating frequency. With the SQUID cooled to 0.35 K, we observe a minimum system noise temperature of 0.55 ± 0.13 K, dominated by the contribution from the SQUID amplifier.
A dc superconducting quantum interference device (SQUID) with a resonant microstrip input is operated as an amplifier at temperatures down to 20 mK. A second SQUID is used as a postamplifier. Below about 100 mK, the noise temperature is 52±20 mK at 538 MHz, estimated from measurements of signal-to-noise ratio, and 47±10 mK at 519 MHz, estimated from the noise generated by a resonant circuit coupled to the input. The quantum-limited noise temperatures are 26 and 25 mK, respectively. The measured noise temperature is limited by hot electrons generated by the bias current.
Low-loss, high frequency acoustic resonators cooled to millikelvin temperatures are a topic of great interest for application to hybrid quantum systems. When cooled to 20 mK, we show that resonant acoustic phonon modes in a bulk acoustic wave quartz resonator demonstrate exceptionally low loss (with Q-factors of order billions) at frequencies of 15.6 and 65.4 MHz, with a maximum f · Q product of 7.8 × 1016 Hz. Given this result, we show that the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained. Such resonators possess the low losses crucial for electromagnetic cooling to the phonon ground state, and the possibility of long coherence and interaction times of a few seconds, allowing multiple quantum gate operations.