Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1202.4556 · Applied Physics Letters

Extremely low-loss acoustic phonons in a quartz bulk acoustic wave resonator at millikelvin temperature

Maxim Goryachev, Daniel Lloyd Creedon, Eugene N. Ivanov, Serge Galliou, R. Bourquin, Michael Edmund Tobar

Published Jun 11, 2012• 87 citations
arXivHTMLPDF

Abstract

Low-loss, high frequency acoustic resonators cooled to millikelvin temperatures are a topic of great interest for application to hybrid quantum systems. When cooled to 20 mK, we show that resonant acoustic phonon modes in a bulk acoustic wave quartz resonator demonstrate exceptionally low loss (with Q-factors of order billions) at frequencies of 15.6 and 65.4 MHz, with a maximum f · Q product of 7.8 × 1016 Hz. Given this result, we show that the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained. Such resonators possess the low losses crucial for electromagnetic cooling to the phonon ground state, and the possibility of long coherence and interaction times of a few seconds, allowing multiple quantum gate operations.

DOI
10.1063/1.4729292

Related papers

Extremely high Q-factor mechanical modes in quartz bulk acoustic wave resonators at millikelvin temperature

Maxim Goryachev, Daniel Lloyd Creedon, Eugene N. Ivanov +3 more

We demonstrate that Bulk Acoustic Wave (BAW) quartz resonator cooled down to millikelvin temperatures are excellent building blocks for hybrid quantum systems with extremely long coherence times. Two overtones of the longitudinal mode at frequencies of 15.6 and 65.4 MHz demonstrate a maximum f.Q product of 7.8×1016 Hz. With this result, the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained in other mechanical systems. Tested quartz resonators possess the ultra low acoustic losses crucial for electromagnetic cooling to the phonon ground state.

AIP conference proceedings•Jan 1, 2014•2 citations

Quartz Mechanical Resonators for Circuit Quantum Acoustics

Emser, Alec L.

Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.

•Apr 17, 2025•0 citations

Measurements of a quantum bulk acoustic resonator using a superconducting qubit

M.-H. Chou, Étienne Dumur, Youpeng Zhong +8 more

Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Qi≈4.3×104. Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.

arXiv:2012.04583•Applied Physics Letters•Dec 21, 2020•18 citations

Sapphire whispering gallery mode resonators at millikelvin temperature

Daniel Lloyd Creedon, Yarema Reshitnyk, Jean-Michel Le Floch +4 more

Single crystal sapphire exhibits extremely high electrical and mechanical Q-factors (~109at 4K), which are important characteristics for electromechanical experiments at the quantum limit. We report the first cool down of a bulk sapphire sample below super fluid liquid helium temperature (1.6K) to as low as 25mK. The electromagnetic properties were characterized at microwave frequencies over a broad range of excitation powers. At high powers we report the observation of thermal bistability in millikelvin sapphire due to the material properties such as the T3dependence on thermal conductivity and the ultra-low dielectric loss tangent of the material. We identify "magic temperatures" between 80 to 2100 mK, the lowest ever measured, at which the onset of bistability is suppressed. At very low excitation strength (E/ ω~1) measurements were sensitive enough to measure saturation effects due to a highly detuned electron spin resonance, which limited the loss tangent of the material to about 2>;-8at 13.868 and 13.259 GHz. Small power dependent frequency shifts were also measured, which corresponds to an added magnetic susceptibility of order 10-9. This work shows that quantum limited microwave resonators with Q-factors >;108are possible by implementing sapphire whispering gallery modes. These phenomena at low temperatures make sapphire suitable for a host of quantum metrology applications.

•Aug 1, 2011•0 citations

Multimode Strong Coupling in Superconducting Cavity Piezoelectromechanics

Xu Han, Chang‐Ling Zou, Hong X. Tang

High-frequency mechanical resonators subjected to low thermal phonon occupancy are easier to be prepared to the ground state by direct cryogenic cooling. Their extreme stiffness, however, poses a significant challenge for external interrogations. Here we demonstrate a superconducting cavity piezoelectromechanical system in which multiple modes of a bulk acoustic resonator oscillating at 10 GHz are coupled to a planar microwave superconducting resonator with a cooperativity exceeding 2×10^{3}, deep in the strong coupling regime. By implementation of the noncontact coupling scheme to reduce mechanical dissipation, the system exhibits excellent coherence characterized by a frequency-quality-factor product of 7.5×10^{15} Hz. Interesting dynamics of classical temporal oscillations of the microwave energy is observed, implying the coherent conversion between phonons and photons. The demonstrated high-frequency cavity piezoelectromechanics is compatible with superconducting qubits, representing an important step towards hybrid quantum systems.

arXiv:1604.06050•Physical Review Letters•Sep 14, 2016•72 citations

Loss Mechanisms in High-coherence Multimode Mechanical Resonators Coupled to Superconducting Circuits

Raquel Garcia Belles, Alexander Anferov, Lukas F. Deeg +14 more

Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 $μ$s and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of $C_{T_2}=1.1\times10^5$. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.

quant-pharXiv:2602.22117•PRX Quantum•Feb 26, 2026•8 citations
Low-loss, high frequency acoustic resonators cooled to millikelvin temperatures are a topic of great interest for application to hybrid quantum systems. When cooled to 20 mK, we show that resonant acoustic phonon modes in a bulk acoustic wave quartz resonator demonstrate exceptionally low loss (with Q-factors of order billions) at frequencies of 15.6 and 65.4 MHz, with a maximum f · Q product of 7.8 × 1016 Hz. Given this result, we show that the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained. Such resonators possess the low losses crucial for electromagnetic cooling to the phonon ground state, and the possibility of long coherence and interaction times of a few seconds, allowing multiple quantum gate operations.
We demonstrate that Bulk Acoustic Wave (BAW) quartz resonator cooled down to millikelvin temperatures are excellent building blocks for hybrid quantum systems with extremely long coherence times. Two overtones of the longitudinal mode at frequencies of 15.6 and 65.4 MHz demonstrate a maximum f.Q product of 7.8×1016 Hz. With this result, the Q-factor in such devices near the quantum ground state can be four orders of magnitude better than previously attained in other mechanical systems. Tested quartz resonators possess the ultra low acoustic losses crucial for electromagnetic cooling to the phonon ground state.
Hybrid systems that couple superconducting qubits to mechanical oscillators facilitate quantum control of individual phonons and have the potential to enable compact, highly coherent quantum memories and processors. To date, however, the utility of hybrid quantum acoustic devices has been limited by poor qubit and mechanical coherence times that are far shorter than those exhibited by their unhybridized counterparts. A primary challenge lies in the intrinsic nature of elastic waves in solids: the slow speed of sound results in a dense spectrum of acoustic modes, making it difficult to prevent spontaneous emission of the qubit into phononic degrees of freedom. In this thesis, I will present a systematic effort to suppress loss mechanisms in superconducting qubits and mechanical resonators in the context of circuit quantum acoustics. I begin by demonstrating the use of crystallographic orientation optimization to passively suppress diffraction losses in narrow-aperture quartz surface acoustic wave (SAW) resonators. We then study the coupling of SAW resonators to a quasi-continuum of bulk acoustic modes; this motivates us to abandon bulk piezoelectric media in favor of bandgap-protected thin-film devices. By fabricating suspended phononic crystal resonators from thin-film quartz, we demonstrate an order-of-magnitude improvement in the coherence of this class of devices. I conclude by presenting preliminary measurements of a new flip-chip architecture for circuit quantum acoustics -- the `acoustic trampoline' -- that is designed to maximize qubit-mechanical coupling while simultaneously suppressing spontaneous acoustic emission.
Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Qi≈4.3×104. Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. This approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.
Single crystal sapphire exhibits extremely high electrical and mechanical Q-factors (~109at 4K), which are important characteristics for electromechanical experiments at the quantum limit. We report the first cool down of a bulk sapphire sample below super fluid liquid helium temperature (1.6K) to as low as 25mK. The electromagnetic properties were characterized at microwave frequencies over a broad range of excitation powers. At high powers we report the observation of thermal bistability in millikelvin sapphire due to the material properties such as the T3dependence on thermal conductivity and the ultra-low dielectric loss tangent of the material. We identify "magic temperatures" between 80 to 2100 mK, the lowest ever measured, at which the onset of bistability is suppressed. At very low excitation strength (E/ ω~1) measurements were sensitive enough to measure saturation effects due to a highly detuned electron spin resonance, which limited the loss tangent of the material to about 2>;-8at 13.868 and 13.259 GHz. Small power dependent frequency shifts were also measured, which corresponds to an added magnetic susceptibility of order 10-9. This work shows that quantum limited microwave resonators with Q-factors >;108are possible by implementing sapphire whispering gallery modes. These phenomena at low temperatures make sapphire suitable for a host of quantum metrology applications.
High-frequency mechanical resonators subjected to low thermal phonon occupancy are easier to be prepared to the ground state by direct cryogenic cooling. Their extreme stiffness, however, poses a significant challenge for external interrogations. Here we demonstrate a superconducting cavity piezoelectromechanical system in which multiple modes of a bulk acoustic resonator oscillating at 10 GHz are coupled to a planar microwave superconducting resonator with a cooperativity exceeding 2×10^{3}, deep in the strong coupling regime. By implementation of the noncontact coupling scheme to reduce mechanical dissipation, the system exhibits excellent coherence characterized by a frequency-quality-factor product of 7.5×10^{15} Hz. Interesting dynamics of classical temporal oscillations of the microwave energy is observed, implying the coherent conversion between phonons and photons. The demonstrated high-frequency cavity piezoelectromechanics is compatible with superconducting qubits, representing an important step towards hybrid quantum systems.
Circuit quantum acoustodynamics (cQAD) devices have a wide range of applications in quantum science, all of which depend crucially on the quantum coherence of the mechanical subsystem. In this context, high-overtone bulk acoustic-wave resonators (HBARs) are particularly promising, since they have shown very high quality factors with negligible dephasing. However, the introduction of piezoelectric films, which are necessary for coupling to a superconducting circuit, can lead to additional loss channels, such as surface scattering and two-level systems (TLS). Here, we study the acoustic dissipation of HBAR resonators in cQAD systems and find that the defect density of the piezoelectric material and its interface with the bulk are limiting factors for the coherence. We measure acoustic modes with phonon lifetimes up to 400 μμμs and lifetime-limited coherence times approaching one millisecond in the quantum regime. When coupled to a superconducting qubit, this leads to a hybrid system with a large quantum coherence cooperativity of CT2=1.1×105C_{T_2}=1.1\times10^5CT2​​=1.1×105. These results represent a new milestone for the performance of cQAD devices and offer concrete paths forward for further improvements.