Atom interferometers use light to track the Doppler effect as ensembles of cold atoms such as ${}^{87}$Rb travel ballistically in vacuum. These systems are used as ultrasensitive gravimeters and could also be exceptional broadband inertial sensors for vehicle navigation and guidance, but typically they are designed for a static laboratory environment. The authors present a compact atom interferometer that measures acceleration and rotation simultaneously and at a high rate, to be used in a dynamic environment for real-time integration of a vehicle's equations of motion.
Atom interferometers use light to track the Doppler effect as ensembles of cold atoms such as 87Rb travel ballistically in vacuum. These systems are used as ultrasensitive gravimeters and could also be exceptional broadband inertial sensors for vehicle navigation and guidance, but typically they are designed for a static laboratory environment. The authors present a compact atom interferometer that measures acceleration and rotation simultaneously and at a high rate, to be used in a dynamic environment for real-time integration of a vehicle's equations of motion.
Light pulse atom interferometers have demonstrated remarkable sensitivity and stability for acceleration and rotation rate measurement. However, typical manifestations are designed for laboratory environments and thus rely on a fixed magnitude and direction of gravity, and limited ambient rotation rate. We have enhanced the application space of atom interferometers towards more dynamic environments, with special attention for inertial navigation. I present our work in the domain of short time-of-flight atom interferometry, whereby the magnitude of ensemble excursion is constrained. The limited interrogation time results in a significant loss of sensitivity. We recover a fraction of the lost sensitivity by operating with an enhanced duty-cycle and data-rate. To demonstrate this concept, we construct an atom interferometer accelerometer capable of operating at data-rates as high as 300 Hz with sensitivities at μg/rtHz levels, which represents a competitive figure for inertial navigation application. For the bulk of this work, we demonstrate a dual-axis sensor capable of simultaneous acceleration and rotation-rate measurements. The sensor relies on a technique we refer to as "ensemble exchange" which provides a high flux source of ultracold atoms by swapping atomic ensembles between two MOTs. We achieve a steady-state atom number of 7e6 atoms/shot using a minimal loading time of a few milliseconds each shot. Furthermore, we find this technique to be robust under dynamic conditions as large as 10 g of acceleration and 20 rad/s of rotation rate, representing a significant enhancement in ultra-cold atom sample preparation. The sensor achieves μg/rtHz and μrad/s/rtHz sensitivities, making this technique a compelling prospect for inertial navigation applications. Through the use of auxiliary cosensors and a real-time combinatorial loop with feedforward and feedback mechanisms, we demonstrate an unprecedented enhancement of the sensor dynamic range up to 20 mg. Finally, I will discuss a novel manifestation of short time-of-flight atom interferometry in a warm atomic vapor, which avoids the complication of cold sample preparation and has the potential for significantly simplified laser systems.
We demonstrate a closed-loop light-pulse atom-interferometer inertial sensor that can realize continuous decoupled measurements of acceleration and rotation rate. The sensor operates with double-loop atom interferometers, which share the same Raman light pulses in a spatially separated Mach-Zehnder configuration and use continuous cold atomic beams propagating in opposite directions from two 2D+ magneto-optical trappings. Acceleration and the rotation rate are decoupled and simultaneously measured by the sum and difference of dual-atom-interferometer signals, respectively. The sensitivities of inertial measurements are also increased to be approximately 1.86 times higher than that of a single atom interferometer. The acceleration phase shift is compensated in real time by phase locking these interferometers via the Raman laser phases from the sum-interferometer signal, and the gyroscope performance is improved. We achieve long-term stabilities of $6.1\phantom{\rule{0.2em}{0ex}}\text{\ensuremath{\mu}}\text{g}$ and 840 nrad/s for the acceleration and the rotation rate, respectively, using a short interrogation time of 0.87 ms (interference area A=0.097mm2). This work provides a building block for an atomic interferometer-based inertial measurement unit for use in field applications that require a high data rate and high stability.
Inertial sensors based on cold atom interferometry exhibit many interesting features for applications related to inertial navigation, particularly in terms of sensitivity and long-term stability. However, at present the typical atom interferometer is still very much an experiment—consisting of a bulky, static apparatus with a limited dynamic range and high sensitivity to environmental effects. To be compliant with mobile applications further development is needed. In this work, we present a compact and mobile experiment, which we recently used to achieve the first inertial measurements with an atomic accelerometer onboard an aircraft. By integrating classical inertial sensors into our apparatus, we are able to operate the atomic sensor well beyond its standard operating range, corresponding to half of an interference fringe. We report atom-based acceleration measurements along both the horizontal and vertical axes of the aircraft with one-shot sensitivities of 2.3 × 10−4 g over a range of ∼ 0.1 g. The same technology can be used to develop cold-atom gyroscopes, which could surpass the best optical gyroscopes in terms of long-term sensitivity. Our apparatus was also designed to study multi-axis atom interferometry with the goal of realizing a full inertial measurement unit comprised of the three axes of acceleration and rotation. Finally, we present a compact and tunable laser system, which constitutes an essential part of any cold-atom-based sensor. The architecture of the laser is based on phase modulating a single fiber-optic laser diode, and can be tuned over a range of 1 GHz in less than 200 μs.
Atom interferometry has hugely benefitted from advances made in cold atom physics over the past twenty years, and ultra-precise quantum sensors are now available for a wide range of applications [1]. In particular, cold atom interferometers have shown excellent performances in the field of acceleration and rotation measurements [2,3], and are foreseen as promising candidates for navigation, geophysics, geo-prospecting and tests of fundamental physics such as the Universality of Free Fall (UFF). In order to carry out a test of the UFF with atoms as test masses, one needs to compare precisely the accelerations of two atoms with different masses as they fall in the Earth’s gravitational field. The sensitivity of atom interferometers scales like the square of the time during which the atoms are in free fall, and on ground this interrogation time is limited by the size of the experimental setup to a fraction of a second. Sending an atom interferometer in space would allow for several seconds of excellent free-fall conditions, and tests of the UFF could be carried out with precisions as low as 10-15 [4]. However, cold atoms experiments rely on complex laser systems, which are needed to cool down and manipulate the atoms, and these systems are usually very sensitive to temperature fluctuations and vibrations. In addition, when operating an inertial sensor, vibrations are a major issue, as they deteriorate the performances of the instrument. This is why cold atom interferometers are usually used in ground based facilities, which provide stable enough environments. In order to carry out airborne or space-borne measurements, one has to design an instrument which is both compact and stable, and such that vibrations induced by the platform will not deteriorate the sensitivity of the sensor. We report on the operation of an atom interferometer on board a plane carrying out parabolic flights (Airbus A300 Zero-G, operated by Novespace). We have constructed a compact and stable laser setup, which is well suited for onboard applications. Our goal is to implement a dual-species Rb-K atom interferometer in order to carry out a test of the UFF in the plane. In this perspective, we are designing a dual-wavelength laser source, which will enable us to cool down and coherently manipulate the quantum states of both atoms. We have successfully tested a preliminary version of the source and obtained a double species magneto-optical trap (MOT).
Light-pulse atom interferometry has emerged as a promising approach for developing quantum inertial and gravity sensors for real-world applications, but achieving robust operation in dynamic environments without sacrificing sensitivity remains challenging. To mitigate performance degradations resulting from vibration-induced noise and mismatches in the spatial overlap between free-falling atoms and light pulses, we demonstrate a first-of-a-kind high-data-rate, high-sensitivity grating magneto-optical trap (GMOT)-based light-pulse atom interferometer (LPAI). This system uses a compact, rugged GMOT architecture, based on an in-vacuum microfabricated grating chip and a single laser-cooling beam, to enable high-data-rate GMOT-based cold-atom generation with sub-Doppler cooling. Our GMOT-based LPAI operates at high data rates (up to 100 Hz), while simultaneously achieving both high acceleration sensitivity (550 ng/rt-Hz at 20 Hz, 1.49 ug/rt-Hz at 45 Hz, and 6.31 ug/rt-Hz at 70 Hz) and good bias stability (71 ng). This compact, rugged architecture paves the way for field-deployable quantum inertial and gravity sensors in high dynamics and for time-multiplexed, multi-axis inertial sensing.
Atom interferometry shows high sensitivity for inertial measurements in the laboratory, but it faces difficulties in field applications because of a trade-off between sensitivity and size. Therefore, there is an urgent need to develop a small sensor with high resolution for measuring acceleration and rotation in inertial navigation applications. Presented here is a miniaturized inertial sensor capable of measuring acceleration and rotation simultaneously based on high-resolution dual atom interferometers. A sensor head is integrated within a volume of 100 l, in which the vacuum chambers are fabricated by bonding quartz-glass windows with epoxy resin. A photoelectric cabinet is composed of four 3U rack units by integrating optical modules and electronic units. Dual atom interference fringes with a contrast of 29% are observed, and the acceleration and rotation are measured simultaneously by extracting their phase shifts. By developing a temperature compensation method to eliminate phase drifts caused by the thermal deformation of the Raman mirrors and using wave vector reversal to eliminate the phase drifts independent of the direction of the wave vector, measurement resolutions of 40 ng at 518 s and 6.1 nrad/s at 10 880 s are achieved for acceleration and rotation, respectively, from Allan deviations.