Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1405.1526 · Applied Physics Letters

Absolute calibration of a charge-coupled device camera with twin beams

Alice Meda, Ivano Ruo Berchera, Ivo Pietro Degiovanni, G. Brida, Maria Luisa Rastello, Marco Genovese

Published Sep 8, 2014• 30 citations
arXivHTMLPDF

Abstract

We report on the absolute calibration of a Charge-Coupled Device (CCD) camera by exploiting quantum correlation. This method exploits a certain number of spatial pairwise quantum correlated modes produced by spontaneous parametric-down-conversion. We develop a measurement model accounting for all the uncertainty contributions, and we reach the relative uncertainty of 0.3% in low photon flux regime. This represents a significant step forward for the characterization of (scientific) CCDs used in mesoscopic light regime.

DOI
10.1063/1.4895665

Related papers

Detection of multimode spatial correlation in PDC and application to the absolute calibration of a CCD camera

G. Brida, Ivo Pietro Degiovanni, Marco Genovese +2 more

We propose and demonstrate experimentally a new method based on the spatial entanglement for the absolute calibration of analog detectors. The idea consists on measuring the sub-shot-noise intensity correlation between two branches of parametric down conversion, containing many pairwise correlated spatial modes. We calibrate a scientific CCD camera and a preliminary evaluation of the uncertainty indicates the metrological interest of the method.

arXiv:1005.2937•Optics Express•Sep 14, 2010•71 citations

LDPC Coding for QKD at Higher Photon Flux Levels Based on Spatial Entanglement of Twin beams in PDC

F. Daneshgaran, M. Mondin, Inam Bari

Twin beams generated by Parametric Down Conversion (PDC) exhibit quantum correlations that has been effectively used as a tool for many applications including calibration of single photon detectors. By now, detection of multi-mode spatial correlations is a mature field and in principle, only depends on the transmission and detection efficiency of the devices and the channel. In [2, 4, 5], the authors utilized their know-how on almost perfect selection of modes of pairwise correlated entangled beams and the optimization of the noise reduction to below the shot-noise level, for absolute calibration of Charge Coupled Device (CCD) cameras. The same basic principle is currently being considered by the same authors for possible use in Quantum Key Distribution (QKD) [3, 1]. The main advantage in such an approach would be the ability to work with much higher photon fluxes than that of a single photon regime that is theoretically required for discrete variable QKD applications (in practice, very weak laser pulses with mean photon count below one are used).The natural setup of quantization of CCD detection area and subsequent measurement of the correlation statistic needed to detect the presence of the eavesdropper Eve, leads to a QKD channel model that is a Discrete Memoryless Channel (DMC) with a number of inputs and outputs that can be more than two (i.e., the channel is a multi-level DMC). This paper investigates the use of Low Density Parity Check (LDPC) codes for information reconciliation on the effective parallel channels associated with the multi-level DMC. The performance of such codes are shown to be close to the theoretical limits

Journal of Physics Conference Series•Apr 9, 2014•1 citation

CCD-based detection of quantum spatial correlation of twin beams for high-sensitivity imaging

Ottavia Jedrkiewicz, Gabriel Molina‐Terriza, E. Brambilla +4 more

We review and compare the results of quantum spatial correlation measurements in parametric down-conversion in the high-gain pulsed regime, with preliminary measurements performed in the low-gain cw-pumped regime. The diagnostics is based on a high quantum efficiency CCD camera, and in the second case the radiation pattern is recorded after temporal integration of the "single-photon" spatial distribution. The effect of the detected number of temporal modes on the accessibility of the sub-shot noise regime is discussed, together with the identification of suitable regimes for weak image detection.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Sep 11, 2007•0 citations

Absolute calibration of an EMCCD camera by quantum correlation, linking photon counting to the analog regime

Alessio Avella, Ivano Ruo Berchera, Ivo Pietro Degiovanni +2 more

We show how the same setup and procedure, exploiting spatially multimode quantum correlations, allows the absolute calibration of an electron-multiplying charge-coupled (EMCCD) camera from the analog regime down to the single-photon-counting level, just by adjusting the brightness of the quantum source. At the single-photon level, an EMCCD can be operated as an on-off detector, where quantum efficiency depends on the discriminating threshold. We develop a simple model to explain the connection of the two different regimes demonstrating that the efficiency estimated in the analog (bright) regime allows us to accurately predict the detector behavior in the photocounting regime and vice versa. This work establishes a bridge between two regions of the optical measurements that up to now have been based on completely different standards, detectors, and measurement techniques.

arXiv:1601.07379•Optics Letters•Apr 12, 2016•58 citations

Absolute spectral calibration of an intensified CCD camera using twin beams

Ondřej Haderka, Jan Peřina, Václav Michálek +1 more

Twin beams composed of photon pairs are used for absolute determination of quantum detection efficiency of an intensified CCD camera. A method of fitting the experimental photocount statistics with the paired superposition of signal and noise, combined with additional determination of losses in the beams before the detector, is used to reveal the detection efficiencies. The experiment has been performed in several spectral regions defined by the used interference filters. Also, the used twin beams have been reconstructed.

Journal of the Optical Society of America B•Aug 6, 2014•10 citations

Sub-shot noise spatial correlations applied to imaging, metrology and sensing experiments

Ivano Ruo Berchera, Marco Genovese

Istituto Nazionale di Ricerca Metrologica (INRIM), Strada delle Cacce 91, 10135 Torino, Italy. E-mail:i.ruoberchera@inrim.it Quantum correlations of twin beams represent a resource of great importance for the developments of quantum technologies allowing unprecedented results in quantum information, metrology and quantum imaging. Focusing on the measurement of the photon numbers, spatial multimode correlations beyond the shot noise limit have been experimentally demonstrated by using parametric down conversion (PDC) and CCD camera (both at the single photon level and at higher photon flux) [1], and also with other interesting techniques [2]. One of their natural application is the quantum imaging of weak absorbing objects, showed in Fig.1, with sensitivity beyond the shot-noise-level [3]. The idea consists in measuring the intensity pattern on one branch of PDC, where the object has been inserted, and then subtracting the correlated noise pattern measured in the other branch that does not interact with the object. In our presentation we overview the sub-shot noise imaging protocol mentioned above and other applications where the spatial quantum correlation can give some advantages over the classical ones. As an example, we studied the signalto-noise ratio (SNR) of ghost imaging protocols with quantum and classical light [4]. We realized a ghost imaging experiment in the mesoscopic regime (one thousand of photon per pixel per shot), obtaining substantial quantum enhanced performances (see Fig.1). We also demonstrated that spatial quantum correlations provide the possibility for the absolute calibration of analog and/or photon number resolving detectors, providing the first absolute calibration (without any comparison with reference standards, neither optical source nor detector) of a scientific CCD camera [5]. In this first realization we already reached interesting uncertainty level. All these findings indicate that the control and detection of quantum spatial correlation is a rather mature field and other application to different sensing scenarios can be envisaged.

•Jan 1, 2012•1 citation
We report on the absolute calibration of a Charge-Coupled Device (CCD) camera by exploiting quantum correlation. This method exploits a certain number of spatial pairwise quantum correlated modes produced by spontaneous parametric-down-conversion. We develop a measurement model accounting for all the uncertainty contributions, and we reach the relative uncertainty of 0.3% in low photon flux regime. This represents a significant step forward for the characterization of (scientific) CCDs used in mesoscopic light regime.
Twin beams generated by Parametric Down Conversion (PDC) exhibit quantum correlations that has been effectively used as a tool for many applications including calibration of single photon detectors. By now, detection of multi-mode spatial correlations is a mature field and in principle, only depends on the transmission and detection efficiency of the devices and the channel. In [2, 4, 5], the authors utilized their know-how on almost perfect selection of modes of pairwise correlated entangled beams and the optimization of the noise reduction to below the shot-noise level, for absolute calibration of Charge Coupled Device (CCD) cameras. The same basic principle is currently being considered by the same authors for possible use in Quantum Key Distribution (QKD) [3, 1]. The main advantage in such an approach would be the ability to work with much higher photon fluxes than that of a single photon regime that is theoretically required for discrete variable QKD applications (in practice, very weak laser pulses with mean photon count below one are used).The natural setup of quantization of CCD detection area and subsequent measurement of the correlation statistic needed to detect the presence of the eavesdropper Eve, leads to a QKD channel model that is a Discrete Memoryless Channel (DMC) with a number of inputs and outputs that can be more than two (i.e., the channel is a multi-level DMC). This paper investigates the use of Low Density Parity Check (LDPC) codes for information reconciliation on the effective parallel channels associated with the multi-level DMC. The performance of such codes are shown to be close to the theoretical limits
We review and compare the results of quantum spatial correlation measurements in parametric down-conversion in the high-gain pulsed regime, with preliminary measurements performed in the low-gain cw-pumped regime. The diagnostics is based on a high quantum efficiency CCD camera, and in the second case the radiation pattern is recorded after temporal integration of the "single-photon" spatial distribution. The effect of the detected number of temporal modes on the accessibility of the sub-shot noise regime is discussed, together with the identification of suitable regimes for weak image detection.
We show how the same setup and procedure, exploiting spatially multimode quantum correlations, allows the absolute calibration of an electron-multiplying charge-coupled (EMCCD) camera from the analog regime down to the single-photon-counting level, just by adjusting the brightness of the quantum source. At the single-photon level, an EMCCD can be operated as an on-off detector, where quantum efficiency depends on the discriminating threshold. We develop a simple model to explain the connection of the two different regimes demonstrating that the efficiency estimated in the analog (bright) regime allows us to accurately predict the detector behavior in the photocounting regime and vice versa. This work establishes a bridge between two regions of the optical measurements that up to now have been based on completely different standards, detectors, and measurement techniques.
Twin beams composed of photon pairs are used for absolute determination of quantum detection efficiency of an intensified CCD camera. A method of fitting the experimental photocount statistics with the paired superposition of signal and noise, combined with additional determination of losses in the beams before the detector, is used to reveal the detection efficiencies. The experiment has been performed in several spectral regions defined by the used interference filters. Also, the used twin beams have been reconstructed.
Istituto Nazionale di Ricerca Metrologica (INRIM), Strada delle Cacce 91, 10135 Torino, Italy. E-mail:i.ruoberchera@inrim.it Quantum correlations of twin beams represent a resource of great importance for the developments of quantum technologies allowing unprecedented results in quantum information, metrology and quantum imaging. Focusing on the measurement of the photon numbers, spatial multimode correlations beyond the shot noise limit have been experimentally demonstrated by using parametric down conversion (PDC) and CCD camera (both at the single photon level and at higher photon flux) [1], and also with other interesting techniques [2]. One of their natural application is the quantum imaging of weak absorbing objects, showed in Fig.1, with sensitivity beyond the shot-noise-level [3]. The idea consists in measuring the intensity pattern on one branch of PDC, where the object has been inserted, and then subtracting the correlated noise pattern measured in the other branch that does not interact with the object. In our presentation we overview the sub-shot noise imaging protocol mentioned above and other applications where the spatial quantum correlation can give some advantages over the classical ones. As an example, we studied the signalto-noise ratio (SNR) of ghost imaging protocols with quantum and classical light [4]. We realized a ghost imaging experiment in the mesoscopic regime (one thousand of photon per pixel per shot), obtaining substantial quantum enhanced performances (see Fig.1). We also demonstrated that spatial quantum correlations provide the possibility for the absolute calibration of analog and/or photon number resolving detectors, providing the first absolute calibration (without any comparison with reference standards, neither optical source nor detector) of a scientific CCD camera [5]. In this first realization we already reached interesting uncertainty level. All these findings indicate that the control and detection of quantum spatial correlation is a rather mature field and other application to different sensing scenarios can be envisaged.