Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1402.4229

Realization of white light cavity for ulra-short optical signal storage and Processing

Soysal, Ahmet, Suad sedki, Alexander Pavlov

Published Feb 18, 2014• 0 citations
arXivHTMLPDF

Abstract

We have demonstrated that chirped Bragg gratings can compensate for a chromatic dispersion by reflecting different wavelengths at different location along the axis of the gratings. In this paper, we make use of such a dispersion-compensating property to create a white light cavity (WLC) effect that cancels the round trip phase shift due to propagation as the optical frequency is tuned. A pair of LCBGs is used to make the cavity. To fulfill WLC condition, the dispersion profile of the LCBGs is tailored by adjusting parameters such as chirping rate, modulation depth and the length of the grating region. Numerical simulation shows WLC bandwidth is ~10GHz.

DOI
10.48550/arxiv.1402.4229

Related papers

Distortion free pulse delay system using a pair of tunable white light cavities

H. Yum, May E. Kim, Y. J. Jang +1 more

Recently, a tunable bandwidth white light cavity (WLC) was demonstrated by using an anomalously dispersive intra-cavity medium to adjust a cavity linewidth without reducing the cavity buildup factor [G.S. Pati et al., Phys. Rev. Lett. 99, 133601 (2007)]. In this paper, we show theoretically how such a WLC can be used to realize a distortion-free delay system for a data pulse. The system consists of two WLCs placed in series. Once the pulse has passed through them, the fast-light media in both WLCs are deactivated, so that each of these now acts as a very high reflectivity mirror. The data pulse bounces around between these mirrors, undergoing negligible attenuation per pass. The trapped pulse can be released by activating the fast-light medium in either WLC. Numerical simulations show that such a system can far exceed the delay-bandwidth constraint encountered in a typical data buffer employing slow light. We also show that the pulse remains virtually undistorted during the process.

arXiv:1012.4553•Optics Express•Mar 24, 2011•26 citations

Study of White Light Cavity Effect via Stimulated Brillouin Scattering Induced Fast Light in a Fiber Ring Resonator

H. Yum

Techniques to control dispersion in a medium have attracted much attention due\nto potential applications to devices such as ring laser gyroscopes, interferometric\ngravitational wave detectors, data buffers, phased array radars and quantum information\nprocessors. Of particular interest is an optical resonator containing a medium with an\nanomalous dispersion corresponding to fast-light, which behaves as a White Light\nCavity (WLC). A WLC can be tailored to improve the sensitivity of sensing devices as\nwell as to realize an optical data buffering system that overcomes the delay-bandwidth\nproduct of a conventional cavity.\nThis dissertation describes techniques to tailor the dispersion for fast-light in\nintracavity media. We present first a demonstration of fast-light in a photorefractive\ncrystal. When placed inside a cavity, such a medium could be used to enhance the\nbandwidth of a gravitational wave detector. We then describe how a superluminal laser\ncan be realized by adding anomalously dispersive medium inside a ring laser. We\nidentify theoretical conditions under which the sensitivity of the resonance frequency to a change in the cavity length is enhanced by as much as seven orders of magnitude. This\npaves the way for realizing a fast-light enhanced ring laser gyroscope, for example. This\nis followed by the development of a novel data buffering system which employs two\nWLC systems in series. In this system, a data pulse can be delayed an arbitrary amount\nof time, without significant distortion. The delay time is independent of the data\nbandwidth, and is limited only by the attenuation experienced by the data pulse as it\nbounces between two high-reflectivity mirrors. Such a device would represent a\nsignificant breakthrough in overcoming the delay-time bandwidth product limitation\ninherent in conventional data buffers.\nWe then describe our experimental effort to create a fiber-based WLC by using\nstimulated Brillouin scattering (SBS). Experimental results, in agreement with our\ntheoretical model presented here, show that the WLC effect is small under the conditions\nsupported by current fiber optic technology. We conclude that future efforts to induce a\nlarge WLC effect would require fibers with high Brillouin coefficient and low\ntransmission loss, as well as optical elements with very low insertion loss and high\npower damage thresholds.

•Oct 12, 2010•0 citations

The Concept of White Light Cavities Using Atomic Phase Coherence

R-H Rinkleff, Andreas Wicht

We describe a concept to realize a broadband high finesse optical cavity (white light cavity) using low-loss negative dispersive media. Two atomic systems are discussed, which allow transparency and λ-compensation, i.e. the dispersion of the medium compensates the frequency dependence of the vacuum wavelength. These atomic systems are (i) the driven two-level system and (ii) two closely spaced gain lines. We explain why the second scheme should provide better performance in terms of the realization of a white light cavity.

Physica Scripta•Jan 1, 2005•42 citations

THz white light cavity with nonlinear dispersion in graphene

Wenpeng Zhou, Yongqi Cai, Shucai Zhao +4 more

A white light cavity (WLC) scheme is proposed to achieve broadband response in the terahertz (THz) region by enhanced nonlinear dispersion in a magnetized graphene system. In the weak probe field limit, the cavity linewidth is narrowed due to electromagnetically induced transparency, and then it becomes nearly as broad as the empty-cavity linewidth under the condition of Autler-Towns splitting. It is interesting to find that the cavity linewidth can be further broadened by enhanced nonlinear dispersion. The simulation result shows that the response range of the cavity is from 6.273 THz to 6.308 THz under the given condition, which is nearly 11 times larger than the empty-cavity linewidth. Furthermore, the improvement in cavity transmission and the response of WLC at different frequencies are investigated.

Applied Optics•Mar 31, 2020•5 citations

White-light cavity with competing linear and nonlinear dispersions

Haibin Wu, Min Xiao

We experimentally demonstrate that broad, tunable bandwidth of an optical ring cavity can be achieved by making use of the negative dispersion of the Kerr nonlinear refractive index in the three-level electromagnetically-induced transparency medium. For a given cavity field intensity, the white-light cavity condition can always be satisfied by choosing the appropriate coupling beam parameters. This white-light cavity scheme can be used effectively to achieve large buildup intensity in the signal-recycling cavity with a broad bandwidth in future advanced gravitational wave detectors.

Physical Review A•Mar 6, 2008•39 citations

Four-wave mixing enhanced white-light cavity

Robert Fleischhaker, Jörg Evers

We discuss bandwidth enhancement of a cavity without reducing its maximum intensity buildup in a regime where the light propagation dynamics is crucial. The enhancement relies on a frequency-dependent phase compensation via negative dispersion provided by a coherently prepared atomic medium in the cavity. We analyze the spatiotemporal dynamics in such a white-light cavity with a full simulation of the field propagation. We find that the probe field dispersion is in addition changed by a coherent field which is generated within the medium via four-wave mixing. Counterintuitively, this in-medium dynamics leads to a further enhancement of the cavity bandwidth.

arXiv:0806.2450•Physical Review A•Nov 17, 2008•23 citations
We have demonstrated that chirped Bragg gratings can compensate for a chromatic dispersion by reflecting different wavelengths at different location along the axis of the gratings. In this paper, we make use of such a dispersion-compensating property to create a white light cavity (WLC) effect that cancels the round trip phase shift due to propagation as the optical frequency is tuned. A pair of LCBGs is used to make the cavity. To fulfill WLC condition, the dispersion profile of the LCBGs is tailored by adjusting parameters such as chirping rate, modulation depth and the length of the grating region. Numerical simulation shows WLC bandwidth is ~10GHz.
Recently, a tunable bandwidth white light cavity (WLC) was demonstrated by using an anomalously dispersive intra-cavity medium to adjust a cavity linewidth without reducing the cavity buildup factor [G.S. Pati et al., Phys. Rev. Lett. 99, 133601 (2007)]. In this paper, we show theoretically how such a WLC can be used to realize a distortion-free delay system for a data pulse. The system consists of two WLCs placed in series. Once the pulse has passed through them, the fast-light media in both WLCs are deactivated, so that each of these now acts as a very high reflectivity mirror. The data pulse bounces around between these mirrors, undergoing negligible attenuation per pass. The trapped pulse can be released by activating the fast-light medium in either WLC. Numerical simulations show that such a system can far exceed the delay-bandwidth constraint encountered in a typical data buffer employing slow light. We also show that the pulse remains virtually undistorted during the process.
Techniques to control dispersion in a medium have attracted much attention due\nto potential applications to devices such as ring laser gyroscopes, interferometric\ngravitational wave detectors, data buffers, phased array radars and quantum information\nprocessors. Of particular interest is an optical resonator containing a medium with an\nanomalous dispersion corresponding to fast-light, which behaves as a White Light\nCavity (WLC). A WLC can be tailored to improve the sensitivity of sensing devices as\nwell as to realize an optical data buffering system that overcomes the delay-bandwidth\nproduct of a conventional cavity.\nThis dissertation describes techniques to tailor the dispersion for fast-light in\nintracavity media. We present first a demonstration of fast-light in a photorefractive\ncrystal. When placed inside a cavity, such a medium could be used to enhance the\nbandwidth of a gravitational wave detector. We then describe how a superluminal laser\ncan be realized by adding anomalously dispersive medium inside a ring laser. We\nidentify theoretical conditions under which the sensitivity of the resonance frequency to a change in the cavity length is enhanced by as much as seven orders of magnitude. This\npaves the way for realizing a fast-light enhanced ring laser gyroscope, for example. This\nis followed by the development of a novel data buffering system which employs two\nWLC systems in series. In this system, a data pulse can be delayed an arbitrary amount\nof time, without significant distortion. The delay time is independent of the data\nbandwidth, and is limited only by the attenuation experienced by the data pulse as it\nbounces between two high-reflectivity mirrors. Such a device would represent a\nsignificant breakthrough in overcoming the delay-time bandwidth product limitation\ninherent in conventional data buffers.\nWe then describe our experimental effort to create a fiber-based WLC by using\nstimulated Brillouin scattering (SBS). Experimental results, in agreement with our\ntheoretical model presented here, show that the WLC effect is small under the conditions\nsupported by current fiber optic technology. We conclude that future efforts to induce a\nlarge WLC effect would require fibers with high Brillouin coefficient and low\ntransmission loss, as well as optical elements with very low insertion loss and high\npower damage thresholds.
We describe a concept to realize a broadband high finesse optical cavity (white light cavity) using low-loss negative dispersive media. Two atomic systems are discussed, which allow transparency and λ-compensation, i.e. the dispersion of the medium compensates the frequency dependence of the vacuum wavelength. These atomic systems are (i) the driven two-level system and (ii) two closely spaced gain lines. We explain why the second scheme should provide better performance in terms of the realization of a white light cavity.
A white light cavity (WLC) scheme is proposed to achieve broadband response in the terahertz (THz) region by enhanced nonlinear dispersion in a magnetized graphene system. In the weak probe field limit, the cavity linewidth is narrowed due to electromagnetically induced transparency, and then it becomes nearly as broad as the empty-cavity linewidth under the condition of Autler-Towns splitting. It is interesting to find that the cavity linewidth can be further broadened by enhanced nonlinear dispersion. The simulation result shows that the response range of the cavity is from 6.273 THz to 6.308 THz under the given condition, which is nearly 11 times larger than the empty-cavity linewidth. Furthermore, the improvement in cavity transmission and the response of WLC at different frequencies are investigated.
We experimentally demonstrate that broad, tunable bandwidth of an optical ring cavity can be achieved by making use of the negative dispersion of the Kerr nonlinear refractive index in the three-level electromagnetically-induced transparency medium. For a given cavity field intensity, the white-light cavity condition can always be satisfied by choosing the appropriate coupling beam parameters. This white-light cavity scheme can be used effectively to achieve large buildup intensity in the signal-recycling cavity with a broad bandwidth in future advanced gravitational wave detectors.
We discuss bandwidth enhancement of a cavity without reducing its maximum intensity buildup in a regime where the light propagation dynamics is crucial. The enhancement relies on a frequency-dependent phase compensation via negative dispersion provided by a coherently prepared atomic medium in the cavity. We analyze the spatiotemporal dynamics in such a white-light cavity with a full simulation of the field propagation. We find that the probe field dispersion is in addition changed by a coherent field which is generated within the medium via four-wave mixing. Counterintuitively, this in-medium dynamics leads to a further enhancement of the cavity bandwidth.