Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Study of White Light Cavity Effect via Stimulated Brillouin Scattering Induced Fast Light in a Fiber Ring Resonator

H. Yum

Published Oct 12, 2010• 0 citations
OpenAlex

Abstract

Techniques to control dispersion in a medium have attracted much attention due\nto potential applications to devices such as ring laser gyroscopes, interferometric\ngravitational wave detectors, data buffers, phased array radars and quantum information\nprocessors. Of particular interest is an optical resonator containing a medium with an\nanomalous dispersion corresponding to fast-light, which behaves as a White Light\nCavity (WLC). A WLC can be tailored to improve the sensitivity of sensing devices as\nwell as to realize an optical data buffering system that overcomes the delay-bandwidth\nproduct of a conventional cavity.\nThis dissertation describes techniques to tailor the dispersion for fast-light in\nintracavity media. We present first a demonstration of fast-light in a photorefractive\ncrystal. When placed inside a cavity, such a medium could be used to enhance the\nbandwidth of a gravitational wave detector. We then describe how a superluminal laser\ncan be realized by adding anomalously dispersive medium inside a ring laser. We\nidentify theoretical conditions under which the sensitivity of the resonance frequency to a change in the cavity length is enhanced by as much as seven orders of magnitude. This\npaves the way for realizing a fast-light enhanced ring laser gyroscope, for example. This\nis followed by the development of a novel data buffering system which employs two\nWLC systems in series. In this system, a data pulse can be delayed an arbitrary amount\nof time, without significant distortion. The delay time is independent of the data\nbandwidth, and is limited only by the attenuation experienced by the data pulse as it\nbounces between two high-reflectivity mirrors. Such a device would represent a\nsignificant breakthrough in overcoming the delay-time bandwidth product limitation\ninherent in conventional data buffers.\nWe then describe our experimental effort to create a fiber-based WLC by using\nstimulated Brillouin scattering (SBS). Experimental results, in agreement with our\ntheoretical model presented here, show that the WLC effect is small under the conditions\nsupported by current fiber optic technology. We conclude that future efforts to induce a\nlarge WLC effect would require fibers with high Brillouin coefficient and low\ntransmission loss, as well as optical elements with very low insertion loss and high\npower damage thresholds.

Related papers

Distortion free pulse delay system using a pair of tunable white light cavities

H. Yum, May E. Kim, Y. J. Jang +1 more

Recently, a tunable bandwidth white light cavity (WLC) was demonstrated by using an anomalously dispersive intra-cavity medium to adjust a cavity linewidth without reducing the cavity buildup factor [G.S. Pati et al., Phys. Rev. Lett. 99, 133601 (2007)]. In this paper, we show theoretically how such a WLC can be used to realize a distortion-free delay system for a data pulse. The system consists of two WLCs placed in series. Once the pulse has passed through them, the fast-light media in both WLCs are deactivated, so that each of these now acts as a very high reflectivity mirror. The data pulse bounces around between these mirrors, undergoing negligible attenuation per pass. The trapped pulse can be released by activating the fast-light medium in either WLC. Numerical simulations show that such a system can far exceed the delay-bandwidth constraint encountered in a typical data buffer employing slow light. We also show that the pulse remains virtually undistorted during the process.

arXiv:1012.4553•Optics Express•Mar 24, 2011•26 citations

Cascaded superluminal propagation via Brillouin lasing resonance in optical fibers

Liang Zhang, Li Zhan

All-optical group velocity manipulation of light, so-called slow and fast light, has drawn extensive attention due to its potential applications in the fields of optical signal processing, light storage, light-matter interaction enhancement, hypersensitive sensing and temporal cloak. Tremendous approaches of slow and fast light generation have been widely demonstrated by the creation of the sharp spectral resonances in the past decade. Specifically, superluminal propagation (larger-than-light velocity c) through the optical media has been proposed and validated in anomalous dispersion media. One effective approach is employing stimulated Brillouin scattering to harness the narrowband spectral resonance and thus generate slow and fast light in the optical fiber. In particular, Brillouin lasing oscillation has been experimentally demonstrated to generate fast and superluminal propagation in ten-meter optical fibers. Afterwards, the propagating distance over hundreds of meters has been experimentally demonstrated by the suppression of multiple-longitudinal-mode operation. However, the delay-bandwidth product or the fractional advancement is still fundamentally limited in conventional fast and slow light system. For example, the maximum advancement as well as the fractional temporal advancement are practically restricted due to the Brillouin gain saturation and multiple longitudinal mode lasing operation under high pump power in the Brillouin lasing resonance-based fast and superluminal system. In this paper, we experimentally validate the extension of time advancement of superluminal propagation based on Brillouin lasing oscillation for the first time. By employing two stages of single-frequency Brillouin lasing fiber ring resonators, Stokes lasing resonance was effectively created in each fiber ring cavity to deliver Brillouin-induced loss resonance at the center frequency of pump, which essentially leads to fast light and superluminal propagation of the pump light. Consequently, Gaussian signal pulses with the pulse width of 500 ns experiences cascaded Brillouin-induced fast light and even negative group-velocity superluminal propagation. The temporal advancement was basically extended to 365.8 ns which is twice than that of single stage fast light and superluminal system. Correspondingly, the fractional advancement was increased from 0.36 to 0.73. The maximum group velocity was 6.3 times larger than the light speed c in vacuum while negative-group- velocity propagation can be found in the range of −9.9 to −0.2 by increasing the total input power from 593.2 to 812.0 mW. Furthermore, the group index can be manipulated in the range of 1.5 to −4.0 by simply varying the total input pump power. It indicates superluminal signals can be cascaded to essentially extend the propagation distance and enlarge the temporal advancement. The scheme exhibits robustness in cascading Brillouin spectral loss resonance for temporal advancement enhancement as well as propagating distance extension. More importantly, the cascading design could basically eliminate the fundamental limitation introduced by Brillouin gain saturation and multiple longitudinal lasing mode under high power operation in single stage Brillouin fast and superluminal system. Further optimization could also be implemented by utilizing the nonstandard specialty fibers as Brillouin gain medium to achieve an efficient Brillouin lasing resonance for an enhanced advancement efficiency. Additionally, the combination with the cascading technique and long-cavity single-frequency Brillouin lasing resonance could enable the feasibility of distance-limitless and large-advancement superluminal propagation, paving a way for promising applications in sensing and temporal cloak.

Chinese Science Bulletin (Chinese Version)•Sep 28, 2017•5 citations

Distortion Free, High Delay-Bandwidth Product Data Buffer Using Fast-Light Based White Light Cavities

H. Yum, M. Salit, M. S. Shahriar

We propose a distortion-free data buffering system using a fast-light based white light cavity. This system offers a breakthrough in overcoming the delay-bandwidth product constraint in dispersion-based buffers, and can be realized using optical fibers.

Conference on Lasers and Electro-Optics•Jan 1, 2009•0 citations

Governing the speed of a light signal in optical fibers : Brillouin slow and fast light

Sang Hoon Chin

Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.

•Jan 1, 2009•0 citations

Pulse propagation through a dispersive intracavity medium

H. Yum, Youngjoon Jang, M. S. Shahriar

In this paper, we study theoretically the behavior of a pulse as it propagates through an intracavity fast-light medium. The method of using a transfer function to determine a pulse after it passes through a cavity is well known. However, this approach cannot be used to determine the behavior of the pulse inside the cavity. To circumvent this constraint, we use an approach that starts by finding a self-consistent solution for a monochromatic field of infinite spatial and temporal extents, and determine its amplitudes before, inside, and after the cavity. We then construct a Gaussian input pulse by adding a set of these waves, properly phased and weighted, to represent a moving pulse before the cavity. Adding these waves at various time intervals then yields the complete spatial profile everywhere, including before, inside and after the cavity. We first confirm the prediction of this model by analyzing the behavior of a pulse passing through an empty cavity, and comparing the prediction of the output with the one produced by the transfer function method. We then apply the technique to a cavity containing a fast-light medium. The resulting model allows us to visualize the behavior of the pulse as it propagates superluminally inside the cavity, and interferes with itself through multiple bounces. For a vanishing group index, an interference pattern is formed immediately after the pulse enters the cavity, with an output pulse emerging with no time delay or distortion. The results obtained here illustrates the physical mechanism behind pulse propagation through a white light cavity, a process we have proposed earlier for realizing a high bandwidth, long delay data buffering system

arXiv:1012.4483•Dec 20, 2010•1 citation

Superluminal ring laser as a Holy-Grail of precision metrology: Rotation sensing, accelerometry, fiber-optic sensing and gravitational wave detection

M. S. Shahriar

A superluminal ring laser (SRL) is a laser in which the group velocity of light far exceeds, by a factor as large as a million, the vacuum speed of light, without violating special relativity or causality. This behavior results from the so-called fast light effect, corresponding to critically tuned anomalous dispersion. The anomalous dispersion is produced by adding inside the ring cavity an auxiliary medium that produces a narrow dip in the broad-band gain profile produced by the main gain medium. In an SRL, the change in the laser frequency, as a function of a change in the cavity length, is enhanced by a factor of nearly a million, when compared to that of a conventional ring laser. This effect can be used for enhancing the sensitivity of many devices, including a gyroscope, and accelerometer, and a fiber optic sensor. It can also be configured to realize a novel type of gravitational wave detector. We have realized an SRL using a buffer gas loaded Rb vapor cell, pumped on the D1 line, as the main gain medium, and an additional Rb vapor cell for producing the anomalous dispersion via Raman induced pump depletion. In this talk, the author will describe the behavior of this SRL, and outline the various applications we are pursuing, including rotation sensing and accelerometry for inertial navigation under GPS-denied conditions, and gravitational wave detection. He will also describe a fiber-optic based SRL, employing dual peaked Brillouin gain, for ultra-sensitive, general purpose fiber optic sensing.

Journal of Physical Chemistry & Biophysics•Oct 29, 2014•0 citations
Techniques to control dispersion in a medium have attracted much attention due\nto potential applications to devices such as ring laser gyroscopes, interferometric\ngravitational wave detectors, data buffers, phased array radars and quantum information\nprocessors. Of particular interest is an optical resonator containing a medium with an\nanomalous dispersion corresponding to fast-light, which behaves as a White Light\nCavity (WLC). A WLC can be tailored to improve the sensitivity of sensing devices as\nwell as to realize an optical data buffering system that overcomes the delay-bandwidth\nproduct of a conventional cavity.\nThis dissertation describes techniques to tailor the dispersion for fast-light in\nintracavity media. We present first a demonstration of fast-light in a photorefractive\ncrystal. When placed inside a cavity, such a medium could be used to enhance the\nbandwidth of a gravitational wave detector. We then describe how a superluminal laser\ncan be realized by adding anomalously dispersive medium inside a ring laser. We\nidentify theoretical conditions under which the sensitivity of the resonance frequency to a change in the cavity length is enhanced by as much as seven orders of magnitude. This\npaves the way for realizing a fast-light enhanced ring laser gyroscope, for example. This\nis followed by the development of a novel data buffering system which employs two\nWLC systems in series. In this system, a data pulse can be delayed an arbitrary amount\nof time, without significant distortion. The delay time is independent of the data\nbandwidth, and is limited only by the attenuation experienced by the data pulse as it\nbounces between two high-reflectivity mirrors. Such a device would represent a\nsignificant breakthrough in overcoming the delay-time bandwidth product limitation\ninherent in conventional data buffers.\nWe then describe our experimental effort to create a fiber-based WLC by using\nstimulated Brillouin scattering (SBS). Experimental results, in agreement with our\ntheoretical model presented here, show that the WLC effect is small under the conditions\nsupported by current fiber optic technology. We conclude that future efforts to induce a\nlarge WLC effect would require fibers with high Brillouin coefficient and low\ntransmission loss, as well as optical elements with very low insertion loss and high\npower damage thresholds.
Recently, a tunable bandwidth white light cavity (WLC) was demonstrated by using an anomalously dispersive intra-cavity medium to adjust a cavity linewidth without reducing the cavity buildup factor [G.S. Pati et al., Phys. Rev. Lett. 99, 133601 (2007)]. In this paper, we show theoretically how such a WLC can be used to realize a distortion-free delay system for a data pulse. The system consists of two WLCs placed in series. Once the pulse has passed through them, the fast-light media in both WLCs are deactivated, so that each of these now acts as a very high reflectivity mirror. The data pulse bounces around between these mirrors, undergoing negligible attenuation per pass. The trapped pulse can be released by activating the fast-light medium in either WLC. Numerical simulations show that such a system can far exceed the delay-bandwidth constraint encountered in a typical data buffer employing slow light. We also show that the pulse remains virtually undistorted during the process.
All-optical group velocity manipulation of light, so-called slow and fast light, has drawn extensive attention due to its potential applications in the fields of optical signal processing, light storage, light-matter interaction enhancement, hypersensitive sensing and temporal cloak. Tremendous approaches of slow and fast light generation have been widely demonstrated by the creation of the sharp spectral resonances in the past decade. Specifically, superluminal propagation (larger-than-light velocity c) through the optical media has been proposed and validated in anomalous dispersion media. One effective approach is employing stimulated Brillouin scattering to harness the narrowband spectral resonance and thus generate slow and fast light in the optical fiber. In particular, Brillouin lasing oscillation has been experimentally demonstrated to generate fast and superluminal propagation in ten-meter optical fibers. Afterwards, the propagating distance over hundreds of meters has been experimentally demonstrated by the suppression of multiple-longitudinal-mode operation. However, the delay-bandwidth product or the fractional advancement is still fundamentally limited in conventional fast and slow light system. For example, the maximum advancement as well as the fractional temporal advancement are practically restricted due to the Brillouin gain saturation and multiple longitudinal mode lasing operation under high pump power in the Brillouin lasing resonance-based fast and superluminal system. In this paper, we experimentally validate the extension of time advancement of superluminal propagation based on Brillouin lasing oscillation for the first time. By employing two stages of single-frequency Brillouin lasing fiber ring resonators, Stokes lasing resonance was effectively created in each fiber ring cavity to deliver Brillouin-induced loss resonance at the center frequency of pump, which essentially leads to fast light and superluminal propagation of the pump light. Consequently, Gaussian signal pulses with the pulse width of 500 ns experiences cascaded Brillouin-induced fast light and even negative group-velocity superluminal propagation. The temporal advancement was basically extended to 365.8 ns which is twice than that of single stage fast light and superluminal system. Correspondingly, the fractional advancement was increased from 0.36 to 0.73. The maximum group velocity was 6.3 times larger than the light speed c in vacuum while negative-group- velocity propagation can be found in the range of −9.9 to −0.2 by increasing the total input power from 593.2 to 812.0 mW. Furthermore, the group index can be manipulated in the range of 1.5 to −4.0 by simply varying the total input pump power. It indicates superluminal signals can be cascaded to essentially extend the propagation distance and enlarge the temporal advancement. The scheme exhibits robustness in cascading Brillouin spectral loss resonance for temporal advancement enhancement as well as propagating distance extension. More importantly, the cascading design could basically eliminate the fundamental limitation introduced by Brillouin gain saturation and multiple longitudinal lasing mode under high power operation in single stage Brillouin fast and superluminal system. Further optimization could also be implemented by utilizing the nonstandard specialty fibers as Brillouin gain medium to achieve an efficient Brillouin lasing resonance for an enhanced advancement efficiency. Additionally, the combination with the cascading technique and long-cavity single-frequency Brillouin lasing resonance could enable the feasibility of distance-limitless and large-advancement superluminal propagation, paving a way for promising applications in sensing and temporal cloak.
Dynamic control of the speed of a light signal, based on stimulated Brillouin scattering in optical fibers, was theoretically studied and also experimentally demonstrated as the core object of this thesis. To date, slow light based on stimulated Brillouin scattering has shown the unmatched flexibility to offer an efficient timing tool for the development of all-optical future router. Nevertheless, the seeming perfect Brillouin slow light suffered from three major obstacles: naturally narrow signal bandwidth, strong change of signal amplitude, and significant signal distortion. The essential contribution of this work has been mostly dedicated to resolve all those impairments so as to make Brillouin slow light a completely operating all-optical delay line for practical applications. Actually, high capability of tailoring the spectral distribution of the effective Brillouin resonance makes possible to resolve partially or completely all those problems. First of all, a broadband spectral window was passively obtained in between two Brillouin gain/loss resonances by simply appending two segments of fibers showing different Brillouin frequency shifts. The global Brillouin gain of the concatenated fibers manifests a gain/loss doublet resonance showing a broad window in between gain/loss peaks. In practice, this configuration has a crucial advantage that it removes the need of the pump modulation, generally used to create a polychromatic pump source. Therefore, a broadband Brillouin slow and fast light was simple realized with a reduced distortion. Secondly, the signal amplification or attenuation associated to the signal delay was completely compensated by superposing Brillouin gain and loss resonances with identical depth but different width. As a result, the Brillouin gain led to effectively a spectral hole in the center of the broadband absorption and opened a transparent window while the sharp change in the refractive index was preserve. This way it makes possible to realize zero-gain Brillouin slow light. This configuration was also exploited to produce Brillouin fast light with a total absence of signal loss, simply by swapping the spectral position of the two pumps. At last, a signal was continuously delayed through a Brillouin fiber delay line without any distortion. Due to the strong induced dispersion, pulse broadening is a major difficulty in all slow light systems and it is impossible to compensate such broadening using a linear system. Therefore, a conventional Brillouin slow light system was combined with a nonlinear optical fiber loop mirror that gives a nonlinear quadratic transmission. Using this configuration, the inevitable pulse broadening was completely compensated at the output of the loop and a signal was delayed up to one symbol without any distortion. Brillouin slow light systems were further studied in the spectral domain. For a given Brillouin resonance the spectrum of a light pulse was optimized to better match the Brillouin bandwidth. When the time envelope of a pulse was properly shaped, it was clearly observed that the spectral width of the pulse became minimized while preserving the pulse duration. This way the maximum time delay through Brillouin slow light could be enhanced for a fixed pulse width. Brillouin fast light was even realized in total absence of any pump source, which is a plain requirement for the generation of Brillouin slow or fast light. This self-generated delay line, key contribution of this thesis, relies on both spontaneous and stimulated Brillouin scattering in optical fibers. In this implementation, a light signal was strongly boosted above the so-called Brillouin threshold, so that most power of the signal was transferred to a backward propagating wave, namely the generation of amplified spontaneous Stokes wave. Since the center frequency of the intense Stokes wave is below the signal frequency by exactly Brillouin shift of the fiber used, this wave led to a Brillouin loss band centered at the signal frequency. Consequently, the signal experienced fast light propagation and the propagation velocity of the signal was self-controlled, simply by varying the signal input power. This technique has many practical advantages such as its high simplicity of the configuration and an invariant signal power in the output of this delay line. Additionally, this system self-adapts the signal bandwidth as the spectrum of the amplified Stokes wave matches the spectral distribution of the signal. An alternative method to generate all-optical delay line was proposed instead of slow light. This scheme makes use of the combination of wavelength conversion and group velocity dispersion. This type of delay line was mainly aimed at improving the storage capability of delaying element. The wavelength of a signal was simply and efficiently converted at a desired wavelength using cross gain modulation in semiconductor optical amplifiers. Then the converted signal was delivered to a high dispersive medium and arrived at the end of the medium with relative time delay due to the group velocity dispersion. A fractional delay of 140 was continuously produced through this delay line for a signal with a duration of 100 ps, preserving signal bandwidth and wavelength. The effect of slow light on linear interactions between light and matter was experimentally investigated to clarify the current scientific argument regarding slow light-enhanced Beer-Lambert absorption. It was predicted that real slowing of the light group velocity could enhance the molecular linear absorptions so as to improve the sensitivity of this type of sensing. However, the experimental results unambiguously show that material slow light (slow light in traveling wave media) does not enhance the Beer-Lambert absorption.
In this paper, we study theoretically the behavior of a pulse as it propagates through an intracavity fast-light medium. The method of using a transfer function to determine a pulse after it passes through a cavity is well known. However, this approach cannot be used to determine the behavior of the pulse inside the cavity. To circumvent this constraint, we use an approach that starts by finding a self-consistent solution for a monochromatic field of infinite spatial and temporal extents, and determine its amplitudes before, inside, and after the cavity. We then construct a Gaussian input pulse by adding a set of these waves, properly phased and weighted, to represent a moving pulse before the cavity. Adding these waves at various time intervals then yields the complete spatial profile everywhere, including before, inside and after the cavity. We first confirm the prediction of this model by analyzing the behavior of a pulse passing through an empty cavity, and comparing the prediction of the output with the one produced by the transfer function method. We then apply the technique to a cavity containing a fast-light medium. The resulting model allows us to visualize the behavior of the pulse as it propagates superluminally inside the cavity, and interferes with itself through multiple bounces. For a vanishing group index, an interference pattern is formed immediately after the pulse enters the cavity, with an output pulse emerging with no time delay or distortion. The results obtained here illustrates the physical mechanism behind pulse propagation through a white light cavity, a process we have proposed earlier for realizing a high bandwidth, long delay data buffering system
A superluminal ring laser (SRL) is a laser in which the group velocity of light far exceeds, by a factor as large as a million, the vacuum speed of light, without violating special relativity or causality. This behavior results from the so-called fast light effect, corresponding to critically tuned anomalous dispersion. The anomalous dispersion is produced by adding inside the ring cavity an auxiliary medium that produces a narrow dip in the broad-band gain profile produced by the main gain medium. In an SRL, the change in the laser frequency, as a function of a change in the cavity length, is enhanced by a factor of nearly a million, when compared to that of a conventional ring laser. This effect can be used for enhancing the sensitivity of many devices, including a gyroscope, and accelerometer, and a fiber optic sensor. It can also be configured to realize a novel type of gravitational wave detector. We have realized an SRL using a buffer gas loaded Rb vapor cell, pumped on the D1 line, as the main gain medium, and an additional Rb vapor cell for producing the anomalous dispersion via Raman induced pump depletion. In this talk, the author will describe the behavior of this SRL, and outline the various applications we are pursuing, including rotation sensing and accelerometry for inertial navigation under GPS-denied conditions, and gravitational wave detection. He will also describe a fiber-optic based SRL, employing dual peaked Brillouin gain, for ultra-sensitive, general purpose fiber optic sensing.