Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1307.5355 · Physical Review Letters

Absolute and Relative Stability of an Optical Frequency Reference Based on Spectral Hole Burning in Eu3+:Y2SiO5

David R. Leibrandt, Michael J. Thorpe, C. W. Chou, Tara M. Fortier, Scott A. Diddams, Till Rosenband

Published Dec 3, 2013• 27 citations
arXivHTMLPDF

Abstract

We present and analyze four frequency measurements designed to characterize the performance of an optical frequency reference based on spectral hole burning in ${\mathrm{Eu}}^{3+}\mathrm{\text{:}}{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}$. The first frequency comparison, between a single unperturbed spectral hole and a hydrogen maser, demonstrates a fractional frequency drift rate of $5\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}18}\text{ }\text{ }{\mathrm{s}}^{\ensuremath{-}1}$. Optical frequency comparisons between a pattern of spectral holes, a Fabry-P\'erot cavity, and an ${\mathrm{Al}}^{+}$ optical atomic clock show a short-term fractional frequency stability of $1\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}15}{\ensuremath{\tau}}^{\ensuremath{-}1/2}$ that averages down to ${2.5}_{\ensuremath{-}0.5}^{+1.1}\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}16}$ at $\ensuremath{\tau}=540\text{ }\text{ }\mathrm{s}$ (with linear frequency drift removed). Finally, spectral-hole patterns in two different ${\mathrm{Eu}}^{3+}\mathrm{\text{:}}{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}$ crystals located in the same cryogenic vessel are compared, yielding a short-term stability of $7\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}16}{\ensuremath{\tau}}^{\ensuremath{-}1/2}$ that averages down to ${5.5}_{\ensuremath{-}0.9}^{+1.8}\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}17}$ at $\ensuremath{\tau}=204\text{ }\text{ }\mathrm{s}$ (with quadratic frequency drift removed).

DOI
10.1103/physrevlett.111.237402

Related papers

Spectrally Narrow, Long-Term Stable Optical Frequency Reference Based on a Eu3+∶Y2SiO5 Crystal at Cryogenic Temperature

Qunfeng Chen, Andrei Troshyn, Ingo Ernsting +4 more

Using an ultrastable continuous-wave laser at 580 nm we performed spectral hole burning of Eu(3+):Y(2)SiO(5) at a very high spectral resolution. The essential parameters determining the usefulness as a macroscopic frequency reference, linewidth, temperature sensitivity, and long-term stability, were characterized using a H-maser stabilized frequency comb. Spectral holes with a linewidth as low as 6 kHz were observed and the upper limit of the drift of the hole frequency was determined to be 5±3 mHz/s. We discuss the necessary requirements for achieving ultrahigh stability in laser frequency stabilization to these spectral holes.

arXiv:1107.3764•Physical Review Letters•Nov 21, 2011•34 citations

Laser-Frequency Stabilization Based on Steady-State Spectral-Hole Burning in Eu3+∶Y2SiO5

Shon Cook, Till Rosenband, David R. Leibrandt

We present and analyze a method of laser-frequency stabilization via steady-state patterns of spectral holes in Eu(3+)∶Y(2)SiO(5). Three regions of spectral holes are created, spaced in frequency by the ground-state hyperfine splittings of (151)Eu(3+). The absorption pattern is shown not to degrade after days of laser-frequency stabilization. An optical frequency comparison of a laser locked to such a steady-state spectral-hole pattern with an independent cavity-stabilized laser and a Yb optical lattice clock demonstrates a spectral-hole fractional frequency instability of 1.0×10(-15)τ(-1/2) that averages to 8.5(-1.8)(+4.8)×10(-17) at τ=73 s. Residual amplitude modulation at the frequency of the rf drive applied to the fiber-coupled electro-optic modulator is reduced to less than 1×10(-6) fractional amplitude modulation at τ>1 s by an active servo. The contribution of residual amplitude modulation to the laser-frequency instability is further reduced by digital division of the transmission and incident photodetector signals to less than 1×10(-16) at τ>1 s.

arXiv:1504.02390•Physical Review Letters•Jun 23, 2015•64 citations

Shifts of optical frequency references based on spectral-hole burning in Eu3+:Y2SiO5

Michael J. Thorpe, David R. Leibrandt, Till Rosenband

Several properties of Eu 3+ :Y 2 SiO 5 spectral holes are measured, to assess the suitability of broad-band hole-patterns for use as laser-frequency references. We measure frequency shifts due to magnetic fields, side-features of neighboring spectral holes and changing optical probe power. A precise calibration of a temperature insensitive point is also performed, where the temperature-induced frequency shift is canceled to first order by the pressure-induced shift from the crystal's helium-gas environment.

arXiv:1210.4458•New Journal of Physics•Mar 6, 2013•40 citations

Sub-Kelvin Spectral Hole Burning in Eu:YSO for Laser Frequency Stabilisation

A Robbes, Y Yuan, Philippe Goldner +4 more

As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.

•Sep 16, 2025•0 citations

Spectral Hole Burning for Ultra-stable Lasers

Shuo Zhang, Nemanja Lučić, Nicolas Galland +6 more

Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 21, 2021•2 citations

Laser stabilization at 1536 nm using regenerative spectral hole burning

Peter B. Sellin, Nick Strickland, Thomas Böttger +2 more

Laser frequency stabilization giving a 500-Hz Allan deviation for a 2-ms integration time with drift reduced to 7 kHz/min over several minutes was achieved at 1536 nm in the optical communication band. A continuously regenerated spectral hole in the inhomogeneously broadened ${}^{4}{I}_{15/2}{(1)}^{4}{I}_{13/2}(1)$ optical absorption of an ${\mathrm{Er}}^{3+}:{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}$ crystal was used as the short-term frequency reference, while a variation on the locking technique allowed simultaneous use of the inhomogeneously broadened absorption line as a long-term reference. The reported frequency stability was achieved without vibration isolation. Spectral hole burning frequency stabilization provides ideal laser sources for high-resolution spectroscopy, real-time optical signal processing, and a range of applications requiring ultra-narrow-band light sources or coherent detection; the time scale for stability and the compatibility with spectral hole burning devices make this technique complementary to other frequency references for laser stabilization.

Physical review. B, Condensed matter•Mar 30, 2001•54 citations
We present and analyze four frequency measurements designed to characterize the performance of an optical frequency reference based on spectral hole burning in Eu3+:Y2SiO5{\mathrm{Eu}}^{3+}\mathrm{\text{:}}{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}Eu3+:Y2​SiO5​. The first frequency comparison, between a single unperturbed spectral hole and a hydrogen maser, demonstrates a fractional frequency drift rate of 5\ifmmode×\else\texttimes\fi10\ensuremath−18  s\ensuremath−15\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}18}\text{ }\text{ }{\mathrm{s}}^{\ensuremath{-}1}5\ifmmode×\else\texttimes\fi10\ensuremath−18  s\ensuremath−1. Optical frequency comparisons between a pattern of spectral holes, a Fabry-P'erot cavity, and an Al+{\mathrm{Al}}^{+}Al+ optical atomic clock show a short-term fractional frequency stability of 1\ifmmode×\else\texttimes\fi10\ensuremath−15\ensuremathτ\ensuremath−1/21\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}15}{\ensuremath{\tau}}^{\ensuremath{-}1/2}1\ifmmode×\else\texttimes\fi10\ensuremath−15\ensuremathτ\ensuremath−1/2 that averages down to 2.5\ensuremath−0.5+1.1\ifmmode×\else\texttimes\fi10\ensuremath−16{2.5}_{\ensuremath{-}0.5}^{+1.1}\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}16}2.5\ensuremath−0.5+1.1​\ifmmode×\else\texttimes\fi10\ensuremath−16 at \ensuremathτ=540  s\ensuremath{\tau}=540\text{ }\text{ }\mathrm{s}\ensuremathτ=540  s (with linear frequency drift removed). Finally, spectral-hole patterns in two different Eu3+:Y2SiO5{\mathrm{Eu}}^{3+}\mathrm{\text{:}}{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}Eu3+:Y2​SiO5​ crystals located in the same cryogenic vessel are compared, yielding a short-term stability of 7\ifmmode×\else\texttimes\fi10\ensuremath−16\ensuremathτ\ensuremath−1/27\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}16}{\ensuremath{\tau}}^{\ensuremath{-}1/2}7\ifmmode×\else\texttimes\fi10\ensuremath−16\ensuremathτ\ensuremath−1/2 that averages down to 5.5\ensuremath−0.9+1.8\ifmmode×\else\texttimes\fi10\ensuremath−17{5.5}_{\ensuremath{-}0.9}^{+1.8}\ifmmode\times\else\texttimes\fi{}{10}^{\ensuremath{-}17}5.5\ensuremath−0.9+1.8​\ifmmode×\else\texttimes\fi10\ensuremath−17 at \ensuremathτ=204  s\ensuremath{\tau}=204\text{ }\text{ }\mathrm{s}\ensuremathτ=204  s (with quadratic frequency drift removed).
Using an ultrastable continuous-wave laser at 580 nm we performed spectral hole burning of Eu(3+):Y(2)SiO(5) at a very high spectral resolution. The essential parameters determining the usefulness as a macroscopic frequency reference, linewidth, temperature sensitivity, and long-term stability, were characterized using a H-maser stabilized frequency comb. Spectral holes with a linewidth as low as 6 kHz were observed and the upper limit of the drift of the hole frequency was determined to be 5±3 mHz/s. We discuss the necessary requirements for achieving ultrahigh stability in laser frequency stabilization to these spectral holes.
We present and analyze a method of laser-frequency stabilization via steady-state patterns of spectral holes in Eu(3+)∶Y(2)SiO(5). Three regions of spectral holes are created, spaced in frequency by the ground-state hyperfine splittings of (151)Eu(3+). The absorption pattern is shown not to degrade after days of laser-frequency stabilization. An optical frequency comparison of a laser locked to such a steady-state spectral-hole pattern with an independent cavity-stabilized laser and a Yb optical lattice clock demonstrates a spectral-hole fractional frequency instability of 1.0×10(-15)τ(-1/2) that averages to 8.5(-1.8)(+4.8)×10(-17) at τ=73 s. Residual amplitude modulation at the frequency of the rf drive applied to the fiber-coupled electro-optic modulator is reduced to less than 1×10(-6) fractional amplitude modulation at τ>1 s by an active servo. The contribution of residual amplitude modulation to the laser-frequency instability is further reduced by digital division of the transmission and incident photodetector signals to less than 1×10(-16) at τ>1 s.
Several properties of Eu 3+ :Y 2 SiO 5 spectral holes are measured, to assess the suitability of broad-band hole-patterns for use as laser-frequency references. We measure frequency shifts due to magnetic fields, side-features of neighboring spectral holes and changing optical probe power. A precise calibration of a temperature insensitive point is also performed, where the temperature-induced frequency shift is canceled to first order by the pressure-induced shift from the crystal's helium-gas environment.
As basic building blocks for quantum devices, ultra-stable lasers have a profound impact on various fields. Longer laser coherence times enhance the performance of quantum sensors, computers, communications, and optical clocks. Although optical lattice clocks have accomplished significant high-precision measurements, they often fall short of their quantum projection noise limits due to dead times during atom preparation: the instability in the laser frequency introduces stochastic fluctuations during the interrogation of atomic transitions (Dick effect). High-resolution optical clock comparisons are crucial for evaluating their accuracy and could lead to a redefinition of the SI second based on optical transitions [1].However, the most common technique for achieving ultra-stable lasers, the Pound-Drever-Hall method with Fabry-Perot cavities, faces thermal noise limitations of the cavities. To overcome these constraints, alternative methods such as Spectral Hole Burning (SHB) in rare-earth-doped crystals (REICs) have been explored. Indeed, REICs experience inhomogeneous broadening due to local lattice distortions caused by the size difference between dopant and host ions. An SHB protocol, which creates narrow spectral features through selective depletion of specific dopant ion populations using narrow-linewidth lasers, allows to overcome the inhomogeneous broadening and fully exploit the coherence of rare-earth ions. At cryogenic temperatures, Eu:YSO crystal exhibit persistent Spectral Holes a few kHz narrow and with a lifetime up to 10 h, at 4 K [2], making it a high-precision frequency reference, ideal for intermediate-timescale sensing.We report recent experimental progress on SHB in Eu:YSO crystals at specific sub-K dilution temperature setpoints that cancel the thermal sensitivity of the hole frequency [3]. The latest recorded performances on our experiment reach a fractional frequency stability of 4.10-16 at 1 s [4], which is close to the perfomance of our reference cavity at LTE. Therefore, a second SHB setup is needed for our future stability comparisons. On one front, we rationalize our SHB protocol and investigate new optimal burning parameters as well as test various doping concentrations to achieve the narrowest possible spectral holes on both setups. On another, we continue to further improving the laser frequency lock onto spectral holes, by cancelling as many systematic noise sources as possible. We provide the performances of our Michelson interferometer to reject frequency noise induced on light propagation to the crystal and by the cryostat acoustic vibrations. In addition, we explore a group delay measurement technique via phase modulation to enhance the precision on the pointing of the center of spectral holes. This should help removing slow frequency drifts due to asymmetric burning of the hole while it is probed by the laser.
Spectral hole burning in rare earth doped crystal can provide frequency references based on the optical transition of the dopant ions [1] . The narrow spectral patterns can be used to improve laser frequency stabilization [2] , [3] and provide a new generation of ultra-stable lasers with lower thermal noise benefiting from the cryogenic environment and better quality factor of the crystal than the amorphous glass typically used in the Fabry-Perot cavity. We utilize Europium doped yttrium silicon oxide (Eu:YSO) in our experiments, which allow realization of long lived (hours or more depending on temperature) narrow spectral holes ( kHz or less) well suited for high precision experiment applications. We will describe our novel double-heterodyne detection method [4] , used to decrease the detection noise, as well as experiments assessing quantitatively the sensitivity of the spectral pattern to crystal deformation [5] , [6] , application of electric field [7] and temperature fluctuations. We currently demonstrate a state-of-the-art laser frequency stability at 1.7 × 10 − 15 at 1s [4] , limited by the latter effect, for which improvement strategies have been demonstrated elsewhere [2] and which we are currently implementing. The other effects which we have quantitatively studied are compatible with a few 10 − 18 frequency stability at 1s time scale. This work is particularly promising in the context of optical frequency lattice clocks, for which the ultra-stable laser used for probing the clock transition is a strong limiting factor of the frequency stability.
Laser frequency stabilization giving a 500-Hz Allan deviation for a 2-ms integration time with drift reduced to 7 kHz/min over several minutes was achieved at 1536 nm in the optical communication band. A continuously regenerated spectral hole in the inhomogeneously broadened 4I15/2(1)4I13/2(1){}^{4}{I}_{15/2}{(1)}^{4}{I}_{13/2}(1)4I15/2​(1)4I13/2​(1) optical absorption of an Er3+:Y2SiO5{\mathrm{Er}}^{3+}:{\mathrm{Y}}_{2}{\mathrm{SiO}}_{5}Er3+:Y2​SiO5​ crystal was used as the short-term frequency reference, while a variation on the locking technique allowed simultaneous use of the inhomogeneously broadened absorption line as a long-term reference. The reported frequency stability was achieved without vibration isolation. Spectral hole burning frequency stabilization provides ideal laser sources for high-resolution spectroscopy, real-time optical signal processing, and a range of applications requiring ultra-narrow-band light sources or coherent detection; the time scale for stability and the compatibility with spectral hole burning devices make this technique complementary to other frequency references for laser stabilization.