We propose and analyze nonlinear optomechanical protocols that can be implemented by adding a single atom to an optomechanical cavity. In particular, we show how to engineer the environment in order to dissipatively prepare the mechanical oscillator in a superposition of Fock states with fidelity close to 1. Furthermore, we demonstrate that a single atom in a cavity with several mechanical oscillators can be exploited to realize nonlinear many-partite systems by stroboscopically driving the mechanical oscillators. This can be used to prepare nonlinear many-partite states by applying either coherent protocols or engineering dissipation. The analysis of the protocols is carried out using a perturbation theory for degenerate Liouvillians and numerical tools. Our results apply to other systems where a qubit is coupled to a mechanical oscillator via a bosonic mode, e.g., in cavity quantum electromechanics.
We propose and analyze nonlinear optomechanical protocols that can be implemented by adding a single atom to an optomechanical cavity. In particular, we show how to engineer the environment in order to dissipatively prepare the mechanical oscillator in a superposition of Fock states with fidelity close to 1. Furthermore, we demonstrate that a single atom in a cavity with several mechanical oscillators can be exploited to realize nonlinear many-partite systems by stroboscopically driving the mechanical oscillators. This can be used to prepare nonlinear many-partite states by applying either coherent protocols or engineering dissipation. The analysis of the protocols is carried out using a perturbation theory for degenerate Liouvillians and numerical tools. Our results apply to other systems where a qubit is coupled to a mechanical oscillator via a bosonic mode, e.g., in cavity quantum electromechanics.
We propose a scheme that exploits the combined effects of nonlinear dynamics and dissipation to generate macroscopic quantum superpositions in massive optomechanical oscillators. The effective degenerate three-wave mixing interaction between the mechanical and optical cavity modes that results from quadratic optomechanical coupling, together with the cavity dissipation, can result in the existence of dark macroscopic superpositions. We show analytically and confirm numerically that various quantum superpositions can be achieved deterministically, depending on the initial state of the mechanics. The effects of mechanical damping are also studied in detail and quantified by the negativity of the Wigner function. The present scheme can be realized in various optomechanical systems with current technology.
In a nutshell, a cavity optomechanical system consists of a mechanical oscillator inside an optical cavity. Cavity optomechanics studies the interplay between the light-matter radiation-pressure interaction and the change in the cavity frequency induced by mechanical motion. By leveraging the tools of quantum optics and quantum measurement, cavity quantum optomechanics enables the engineering of nonclassical quantum states of bulk matter. In this thesis, I present protocols for engineering such nonclassical quantum states in Part II. First, I introduce a scheme to ‘grow’ a quantum kitten state of a mechanical oscillator into a macroscopic Schrödinger cat state using a series of nonlinear pulsed optomechanical interactions. Next, I detail our proposed schemes to generate and verify entanglement between two mechanical oscillators. Moving on from pulsed optomechanics, I describe the theory behind an experiment that achieved multi-phonon subtraction from a mechanical oscillator in a continuously driven Brillouin optomechanical system. In the final chapter of Part II, I provide a theoretical preview of an experiment that investigates the behaviour of the mechanical oscillator when no light is detected at the output. In Part III, I introduce a new framework for nonlinear cavity quantum optomechanics that incorporates the intrinsic nonlinearity of the radiation-pressure interaction, the nonlinearity from the cavity enhancement, and higher-order mechanical position terms in the expansion of the cavity frequency. I then propose a scheme for measuring mechanical position using general-dyne detection, applicable to pulsed and continuous measurements. This predicts a new regime of operation, the “stochastic Gaussian” regime. Finally, I discuss a protocol for deterministic mechanical squeezing that utilizes the cavity response.
We propose a scheme to prepare macroscopic quantum superpositions of motion in optomachanical nano- or micromechanical oscillators quadratically coupled to an intracavity field. The nonlinear optomechanical coupling leads to an effective degenerate three-wave mixing interaction between the mechanical and cavity modes. The quantum superpositions result from the combined effects of the interaction and cavity dissipation. We show analytically and confirm numerically that various deterministic quantum superpositions can be achieved, depending on initial mechanical state. The effect of mechanical damping is also studied in detail via the negativity of the Wigner function. The present scheme can be realized in various optomechanical systems with current technology.
The ability to prepare a macroscopic mechanical resonator into a quantum superposition state is an outstanding goal of cavity optomechanics. Here, we propose a technique to generate cat states of motion using the intrinsic nonlinearity of a dispersive optomechanical interaction. By applying a bichromatic drive to an optomechanical cavity, our protocol enhances the inherent second-order processes of the system, inducing the requisite two-phonon dissipation. We show that this nonlinear sideband cooling technique can dissipatively engineer a mechanical resonator into a cat state, which we verify using the full Hamiltonian and an adiabatically reduced model. While the fidelity of the cat state is maximized in the single-photon, strong-coupling regime, we demonstrate that Wigner negativity persists even for weak coupling. Finally, we show that our cat state generation protocol is robust to significant thermal decoherence of the mechanical mode, indicating that such a procedure may be feasible for near-term experimental systems.
We put forward a deterministic dissipative protocol to prepare phonon Fock states in nonlinear quantum optomechanical devices. The system is composed of a mechanical mode interacting with an optical field via radiation pressure, whereas the light mode is laser driven in the resolved blue-sideband regime. To keep our results tractable, we switch to an interaction picture in a displaced basis, where the effective Hamiltonian exhibits the selective photon-phonon interaction explicitly. After proper parameter adjustment and similarly to cavity-cooling schemes, the quantum evolution allows steering of the mechanical degree of freedom to the desired Fock state by directing the optical excitations dynamically towards the target phonon state. The numerical results, including decoherence on both the mechanical and the optical degrees of freedom, prove to be quite robust in the good- and bad-cavity regimes, with fidelities exceeding 95%. Finally, characterization of the achieved nonclassicality, as well as the limitations and feasibility of our protocol under experimental parameters, is also discussed.
A primary challenge in quantum science and technology is to isolate the fragile quantum states from their environment in order to prevent the irreversible leakage of energy and information which causes decoherence. In the late 1990s, however, a new paradigm emerged, in which the environment itself, as well as the coupling to this environment of the quantum state, are engineered in ways which, counterintuitively, facilitate the creation and stabilization of desired quantum properties. This paradigm, coined reservoir engineering, has been pursued experimentally in various implementations, in which the states of trapped ions, atomic clouds or artificial atoms based on superconducting circuits were driven into a desired target state using a dissipative reservoir. In all these cases, the cold electromagnetic environment served as the engineered reservoir, capitalizing on the tremendous progress in the ability to shape the modes of the electromagnetic field using masers and lasers. In optomechanics, which is the study of the coupling between light and mechanical motion, a similar scenario has been prevalent. Light is used to read out and control the mechanical motion, and in the past few years, various optomechanical architectures both in the optical and microwave domain have enabled to push mechanical systems into the quantum regime. These results can be interpreted in the context of reservoir engineering: cooling and many other optomechanical phenomena exploit the cold, dissipative nature of light. This thesis reports on the development of a multimode superconducting circuit with a mechanically compliant element - fitting into the field of circuit cavity electromechanics -, with which we pursue two themes. In the first set of experiments, reversing the roles of dissipation described above, we engineer the mechanical oscillator into a cold, dissipative environment for microwave light. The mechanical element is the fundamental mode of a free-standing top electrode of a capacitor, 100 nm thick and 32 micron in diameter made of aluminum with an effective mass of around 170 pg, vibrating at a resonance frequency of 5.5 MHz. The dissipative mechanical reservoir is prepared using an auxiliary microwave mode with engineered parameters.We utilize it to control the properties - in particular, the susceptibility - of the electromagnetic field and to perform low-noise amplification close to the quantum limit. The noise analysis reveals that the reservoir is close to its quantum ground state with a mean thermal occupation number well below 1, demonstrating its utility as a resource in the quantum regime. We also show that the system can be driven to the parametric instability threshold, above which self-sustained oscillations of the microwave field (masing) is observed. Finally, we demonstrate injection locking of the maser using an external seed pump. In a second set of experiments, a similar electromechanical circuit is used to implement a microwave isolator based on optomechanical interactions. The overarching theme is that dissipation of the mechanical oscillator, albeit intrinsic and not engineered via an auxiliary mode s a key ingredient for the device to function as a nonreciprocal frequency converter and isolator. In these experiments, an additional mechanical mode is used, such that a 4-mode optomechanical plaquette is realized.