Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1305.2672 · Optics Express

Low-filling-factor superconducting single photon detector with high system detection efficiency

Taro Yamashita, Shigehito Miki, Hirotaka Terai, Zhen Wang

Published Nov 1, 2013• 100 citations
arXivHTMLPDF

Abstract

We designed, fabricated, and measured superconducting nanowire single-photon detectors (SSPDs) with low filling factor which achieve high system detection efficiency (SDE) and counting rate simultaneously. Numerical simulation reveals that high optical absorptance is possible in SSPDs even for low filing factor by tuning the device design. The SDEs of fabricated 18-50% filling factor SSPDs were measured systematically, and all SSPDs showed high SDEs of 61-80% and the lowest 18% filling factor SSPD achieved a high SDE of 69%.

DOI
10.1364/oe.21.027177

Related papers

Design of a low-filling-factor and polarization-sensitive superconducting nanowire single photon detector with high detection efficiency

Dezhi Li, Rongzhen Jiao

We designed a low-filling-factor and polarization-sensitive superconducting nanowire single photon detector (SNSPD), which can achieve a high absorption efficiency and counting rate simultaneously. Numerical simulations show that high absorption efficiency can be achieved by low-filling-factor SNSPDs with a silicon slot and silver reflector. The absorptance of the NbN nanowire for a transverse magnetic (TM) wave at the wavelength of 1550 nm can be 84.4% when the filling factor is only 16.5%, and the corresponding polarization extinction ratio (PER) is 562.9; the absorptance of the NbN nanowire for a transverse electric (TE) wave can be 67.0% when the filling factor is only 11.7%, and the PER is 7.4.

Photonics Research•Jul 15, 2019•18 citations

Characterization of optical absorptance in superconducting nanowire single-photon detectors

Taro Yamashita, Shigehito Miki, Hirotaka Terai +1 more

We present a numerical simulation of the optical absorptance for the superconducting nanowire single-photon detectors (SNSPDs or SSPDs) designed with various layouts by using finite-element analysis software. The simulation results reveal that the electric field concentrated in the superconducting nanowire is enhanced by reducing the filling factor, and the degree of the enhancement becomes larger for thicker nanowires. Due to the large enhancement of the electric field in the nanowire with a double-side cavity structure, the high optical absorptance can be achieved even for the low-filling-factor layout by tuning the device design, which leads to the realization of SSPDs with high system detection efficiency and high counting rate.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations

Multispectral and low-filling-factor superconducting nanowire single photon detector with high absorption efficiency

Dezhi Li, Xiangyuan Liu, Rongzhen Jiao

We propose a superconducting nanowire single photon detector (SNSPD) that can work efficiently at two target wavelengths and has a significant improvement in the counting rate due to the low-filling-factor nanowires in the silicon slots and the silver reflector. Numerical simulations show that the absorption efficiency can be over 90% at a single wavelength, whether the incident light wavelength is 1550 nm or 1064 nm, and over 80% when the SNSPD is designed to work at both wavelengths. In addition, the reset time is about 24% of the conventional SNSPDs. Our work presents a design for fabricating faster, larger-area, and multispectral SNSPDs with a high efficiency, which can be applied in applications such as quantum optics communication and multiwavelength sensing.

AIP Advances•Aug 1, 2020•5 citations

Superconducting Nanowire Single-Photon Detector With a System Detection Efficiency Over 80% at 940-nm Wavelength

W. J. Zhang, Hao Li, Lixing You +7 more

Implementations of quantum information require single-photon detectors (SPDs) with high detection efficiency (DE) at a wavelength of 940 nm, which is a challenge for the available semiconducting SPDs. Superconducting nanowire SPDs (SNSPDs) are capable of detecting visible and near-infrared single photons with high DE. However, these detection capabilities place stringent design requirements on the cavity and nanowire geometry structures. We design, fabricate, and measure SNSPDs with high DE optimized for the 940-nm wavelength. The NbN SNSPDs were fabricated on 1-D photonic crystals for high optical absorptance. By tuning the filling factor of the nanowire through numerical simulations and experiments, we were able to obtain an SNSPD (7 nm thick, 125 nm width, and 0.57 filling factor, as well as active area of$18\ast 18\ \mu\text{m}$) with a saturated system DE of 83.6$\pm$3.7%, at a dark count rate of 10 Hz, and a low polarization dependence of 1.17$\pm$0.02. To our best knowledge, this is the highest value reported for NbN SNSPDs at 940-nm wavelength. The availability of an SNSPD with high system DE at 940 nm may have a profound impact in the field of photonic quantum technologies, such as multiphoton entanglement.

IEEE photonics journal•Mar 16, 2016•12 citations

High detection efficiency and rate superconducting nanowire single-photon detector with a composite optical structure

Min Gu, Lin Kang, Labao Zhang +5 more

Superconducting nanowire single-photon detectors (SNSPDs) with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance system detection efficiency and count rates. Numerical simulation by finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures. The absorption capacity of the superconducting nanowires reached 69.8% at the wavelength of 850 nm with 0.3 filling factor. When the filling factor was reduced to only 0.08, the absorption capacity is still 48.52%. It greatly decreased the kinetic inductance of SNSPDs, and improved the count rates.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Mar 16, 2015•3 citations

Ultralow-filling-factor superconducting nanowire single-photon detector utilizing a 2D photonic crystal

You Xiao, Xiyuan Cao, Xiaoyu Liu +6 more

Superconducting nanowires enable the operation of outstanding single-photon detectors, which are required particularly for quantum information and weak-light measurement applications. However, the trade-off between detection speed and efficiency, which is related to the filling factors of superconducting nanowires, is still a challenge. Here, we propose a fast, efficient single-photon detector fabricated by integrating ultralow-filling-factor meandered superconducting nanowires atop a photonic crystal (PhC) resonator. This unique structure enables a fast photon response due to the low kinetic inductance of the short nanowires and ensures efficient photon absorption due to the resonant effect of the PhC structure. The proposed detector has a filling factor of only ∼12% while maintaining a high maximum absorption in our simulation of 90%. The fabricated device exhibits a maximum system detection efficiency of 60%, a maximum count rate of ∼80 MHz, and a recovery time of only ∼12 ns, which is three times faster than that of the conventional meandered structure at the same sensing diameter (18 μm). This work helps advance the movement toward high-efficiency, high-speed single-photon detectors and promotes their future application in quantum communication and imaging.

Photonics Research•Oct 11, 2023•8 citations
We designed, fabricated, and measured superconducting nanowire single-photon detectors (SSPDs) with low filling factor which achieve high system detection efficiency (SDE) and counting rate simultaneously. Numerical simulation reveals that high optical absorptance is possible in SSPDs even for low filing factor by tuning the device design. The SDEs of fabricated 18-50% filling factor SSPDs were measured systematically, and all SSPDs showed high SDEs of 61-80% and the lowest 18% filling factor SSPD achieved a high SDE of 69%.
We designed a low-filling-factor and polarization-sensitive superconducting nanowire single photon detector (SNSPD), which can achieve a high absorption efficiency and counting rate simultaneously. Numerical simulations show that high absorption efficiency can be achieved by low-filling-factor SNSPDs with a silicon slot and silver reflector. The absorptance of the NbN nanowire for a transverse magnetic (TM) wave at the wavelength of 1550 nm can be 84.4% when the filling factor is only 16.5%, and the corresponding polarization extinction ratio (PER) is 562.9; the absorptance of the NbN nanowire for a transverse electric (TE) wave can be 67.0% when the filling factor is only 11.7%, and the PER is 7.4.
We present a numerical simulation of the optical absorptance for the superconducting nanowire single-photon detectors (SNSPDs or SSPDs) designed with various layouts by using finite-element analysis software. The simulation results reveal that the electric field concentrated in the superconducting nanowire is enhanced by reducing the filling factor, and the degree of the enhancement becomes larger for thicker nanowires. Due to the large enhancement of the electric field in the nanowire with a double-side cavity structure, the high optical absorptance can be achieved even for the low-filling-factor layout by tuning the device design, which leads to the realization of SSPDs with high system detection efficiency and high counting rate.
We propose a superconducting nanowire single photon detector (SNSPD) that can work efficiently at two target wavelengths and has a significant improvement in the counting rate due to the low-filling-factor nanowires in the silicon slots and the silver reflector. Numerical simulations show that the absorption efficiency can be over 90% at a single wavelength, whether the incident light wavelength is 1550 nm or 1064 nm, and over 80% when the SNSPD is designed to work at both wavelengths. In addition, the reset time is about 24% of the conventional SNSPDs. Our work presents a design for fabricating faster, larger-area, and multispectral SNSPDs with a high efficiency, which can be applied in applications such as quantum optics communication and multiwavelength sensing.
Implementations of quantum information require single-photon detectors (SPDs) with high detection efficiency (DE) at a wavelength of 940 nm, which is a challenge for the available semiconducting SPDs. Superconducting nanowire SPDs (SNSPDs) are capable of detecting visible and near-infrared single photons with high DE. However, these detection capabilities place stringent design requirements on the cavity and nanowire geometry structures. We design, fabricate, and measure SNSPDs with high DE optimized for the 940-nm wavelength. The NbN SNSPDs were fabricated on 1-D photonic crystals for high optical absorptance. By tuning the filling factor of the nanowire through numerical simulations and experiments, we were able to obtain an SNSPD (7 nm thick, 125 nm width, and 0.57 filling factor, as well as active area of18∗18 μm18\ast 18\ \mu\text{m}18∗18 μm) with a saturated system DE of 83.6$\pm3.73.7%, at a dark count rate of 10 Hz, and a low polarization dependence of 1.173.7\pm$0.02. To our best knowledge, this is the highest value reported for NbN SNSPDs at 940-nm wavelength. The availability of an SNSPD with high system DE at 940 nm may have a profound impact in the field of photonic quantum technologies, such as multiphoton entanglement.
Superconducting nanowire single-photon detectors (SNSPDs) with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance system detection efficiency and count rates. Numerical simulation by finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures. The absorption capacity of the superconducting nanowires reached 69.8% at the wavelength of 850 nm with 0.3 filling factor. When the filling factor was reduced to only 0.08, the absorption capacity is still 48.52%. It greatly decreased the kinetic inductance of SNSPDs, and improved the count rates.
Superconducting nanowires enable the operation of outstanding single-photon detectors, which are required particularly for quantum information and weak-light measurement applications. However, the trade-off between detection speed and efficiency, which is related to the filling factors of superconducting nanowires, is still a challenge. Here, we propose a fast, efficient single-photon detector fabricated by integrating ultralow-filling-factor meandered superconducting nanowires atop a photonic crystal (PhC) resonator. This unique structure enables a fast photon response due to the low kinetic inductance of the short nanowires and ensures efficient photon absorption due to the resonant effect of the PhC structure. The proposed detector has a filling factor of only ∼12% while maintaining a high maximum absorption in our simulation of 90%. The fabricated device exhibits a maximum system detection efficiency of 60%, a maximum count rate of ∼80 MHz, and a recovery time of only ∼12 ns, which is three times faster than that of the conventional meandered structure at the same sensing diameter (18 μm). This work helps advance the movement toward high-efficiency, high-speed single-photon detectors and promotes their future application in quantum communication and imaging.