Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

High detection efficiency and rate superconducting nanowire single-photon detector with a composite optical structure

Min Gu, Lin Kang, Labao Zhang, Tao Jia, Chao Wan, Ruiying Xu, Xiaozhong Yang, Peiheng Wu

Published Mar 16, 2015• 3 citations
Publisher

Abstract

Superconducting nanowire single-photon detectors (SNSPDs) with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance system detection efficiency and count rates. Numerical simulation by finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures. The absorption capacity of the superconducting nanowires reached 69.8% at the wavelength of 850 nm with 0.3 filling factor. When the filling factor was reduced to only 0.08, the absorption capacity is still 48.52%. It greatly decreased the kinetic inductance of SNSPDs, and improved the count rates.

DOI
10.1117/12.2078621

Related papers

High-efficiency fast superconducting nanowire single-photon detector with a reflection grating structure

Miṅ Gu, Xiaolin Lin, Dongmei Liu +2 more

Superconducting nanowire single-photon detectors (SNSPDs) with a reflection grating structure are designed to enhance system detection efficiency and detection rate. The absorption capacity of the superconducting nanowires reached 92% at wavelengths of 1550 nm. It reduced the total filling factor of superconducting nanowires to only 0.25, decreased the kinetic inductance of SNSPDs, and improved the count rates.

Frontiers in Optics•Jan 1, 2019•0 citations

High efficiency superconducting nanowire single photon detector at wavelength 940 nm

Y. J. Chen, M. Gu, Labao Zhang +2 more

Superconducting nanowire single photon detectors with an optical resonant cavity structure are fabricated directly on the single crystal substrate. In order to enhance the photons absorption of incident light and improve system detection efficiency (SDE) efficiently, the structure of SNSPD was designed and optimized using the finite-difference time-domain analysis for different kinds of substrates. The NbN-SNSPDs fabricated on different substrates are measured and compared. The SDE of NbN-SNSPD on MgO substrate reaches 66 % at the wavelength of 940nm at a dark count rate of 100 cps by illuminating from the back of the device through single mode optical fiber.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Aug 1, 2015•0 citations

Characterization of optical absorptance in superconducting nanowire single-photon detectors

Taro Yamashita, Shigehito Miki, Hirotaka Terai +1 more

We present a numerical simulation of the optical absorptance for the superconducting nanowire single-photon detectors (SNSPDs or SSPDs) designed with various layouts by using finite-element analysis software. The simulation results reveal that the electric field concentrated in the superconducting nanowire is enhanced by reducing the filling factor, and the degree of the enhancement becomes larger for thicker nanowires. Due to the large enhancement of the electric field in the nanowire with a double-side cavity structure, the high optical absorptance can be achieved even for the low-filling-factor layout by tuning the device design, which leads to the realization of SSPDs with high system detection efficiency and high counting rate.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2013•0 citations

Multispectral and low-filling-factor superconducting nanowire single photon detector with high absorption efficiency

Dezhi Li, Xiangyuan Liu, Rongzhen Jiao

We propose a superconducting nanowire single photon detector (SNSPD) that can work efficiently at two target wavelengths and has a significant improvement in the counting rate due to the low-filling-factor nanowires in the silicon slots and the silver reflector. Numerical simulations show that the absorption efficiency can be over 90% at a single wavelength, whether the incident light wavelength is 1550 nm or 1064 nm, and over 80% when the SNSPD is designed to work at both wavelengths. In addition, the reset time is about 24% of the conventional SNSPDs. Our work presents a design for fabricating faster, larger-area, and multispectral SNSPDs with a high efficiency, which can be applied in applications such as quantum optics communication and multiwavelength sensing.

AIP Advances•Aug 1, 2020•5 citations

Enhancing Detection Efficiency by Applying an Optical Cavity Structure in a Superconducting Nanowire Single-Photon Detector

Shigehito Miki, Taro Yamashita, Mikio Fujiwara +2 more

We report on the enhancement of system detection efficiency in a superconducting nanowire single-photon detector (SNSPD) by applying the optical cavity structure. The nanowire was made using 4-nm-thick NbN thin films and covered with an SiO cavity and Au mirror designed for 1300-1600nm wavelengths. The device is mounted into fiber-coupled packages, and installed in a practical multichannel system based on GM cryocoolers. System detection efficiency depends on the absorptance of cavity structure, and reached 28% and 40% at 1550nm and 1310nm wavelengths, respectively. These values were considerably higher than an SNSPD without optical cavity.

IEICE Transactions on Electronics•Jan 1, 2011•3 citations

Design of a low-filling-factor and polarization-sensitive superconducting nanowire single photon detector with high detection efficiency

Dezhi Li, Rongzhen Jiao

We designed a low-filling-factor and polarization-sensitive superconducting nanowire single photon detector (SNSPD), which can achieve a high absorption efficiency and counting rate simultaneously. Numerical simulations show that high absorption efficiency can be achieved by low-filling-factor SNSPDs with a silicon slot and silver reflector. The absorptance of the NbN nanowire for a transverse magnetic (TM) wave at the wavelength of 1550 nm can be 84.4% when the filling factor is only 16.5%, and the corresponding polarization extinction ratio (PER) is 562.9; the absorptance of the NbN nanowire for a transverse electric (TE) wave can be 67.0% when the filling factor is only 11.7%, and the PER is 7.4.

Photonics Research•Jul 15, 2019•18 citations
Superconducting nanowire single-photon detectors (SNSPDs) with a composite optical structure composed of phase-grating and optical cavity structures are designed to enhance system detection efficiency and count rates. Numerical simulation by finite-difference time-domain method shows that the photon absorption capacity of SNSPDs with a composite optical structure can be enhanced significantly by adjusting the parameters of the phase-grating and optical cavity structures. The absorption capacity of the superconducting nanowires reached 69.8% at the wavelength of 850 nm with 0.3 filling factor. When the filling factor was reduced to only 0.08, the absorption capacity is still 48.52%. It greatly decreased the kinetic inductance of SNSPDs, and improved the count rates.
Superconducting nanowire single photon detectors with an optical resonant cavity structure are fabricated directly on the single crystal substrate. In order to enhance the photons absorption of incident light and improve system detection efficiency (SDE) efficiently, the structure of SNSPD was designed and optimized using the finite-difference time-domain analysis for different kinds of substrates. The NbN-SNSPDs fabricated on different substrates are measured and compared. The SDE of NbN-SNSPD on MgO substrate reaches 66 % at the wavelength of 940nm at a dark count rate of 100 cps by illuminating from the back of the device through single mode optical fiber.
We present a numerical simulation of the optical absorptance for the superconducting nanowire single-photon detectors (SNSPDs or SSPDs) designed with various layouts by using finite-element analysis software. The simulation results reveal that the electric field concentrated in the superconducting nanowire is enhanced by reducing the filling factor, and the degree of the enhancement becomes larger for thicker nanowires. Due to the large enhancement of the electric field in the nanowire with a double-side cavity structure, the high optical absorptance can be achieved even for the low-filling-factor layout by tuning the device design, which leads to the realization of SSPDs with high system detection efficiency and high counting rate.
We propose a superconducting nanowire single photon detector (SNSPD) that can work efficiently at two target wavelengths and has a significant improvement in the counting rate due to the low-filling-factor nanowires in the silicon slots and the silver reflector. Numerical simulations show that the absorption efficiency can be over 90% at a single wavelength, whether the incident light wavelength is 1550 nm or 1064 nm, and over 80% when the SNSPD is designed to work at both wavelengths. In addition, the reset time is about 24% of the conventional SNSPDs. Our work presents a design for fabricating faster, larger-area, and multispectral SNSPDs with a high efficiency, which can be applied in applications such as quantum optics communication and multiwavelength sensing.
We report on the enhancement of system detection efficiency in a superconducting nanowire single-photon detector (SNSPD) by applying the optical cavity structure. The nanowire was made using 4-nm-thick NbN thin films and covered with an SiO cavity and Au mirror designed for 1300-1600nm wavelengths. The device is mounted into fiber-coupled packages, and installed in a practical multichannel system based on GM cryocoolers. System detection efficiency depends on the absorptance of cavity structure, and reached 28% and 40% at 1550nm and 1310nm wavelengths, respectively. These values were considerably higher than an SNSPD without optical cavity.
We designed a low-filling-factor and polarization-sensitive superconducting nanowire single photon detector (SNSPD), which can achieve a high absorption efficiency and counting rate simultaneously. Numerical simulations show that high absorption efficiency can be achieved by low-filling-factor SNSPDs with a silicon slot and silver reflector. The absorptance of the NbN nanowire for a transverse magnetic (TM) wave at the wavelength of 1550 nm can be 84.4% when the filling factor is only 16.5%, and the corresponding polarization extinction ratio (PER) is 562.9; the absorptance of the NbN nanowire for a transverse electric (TE) wave can be 67.0% when the filling factor is only 11.7%, and the PER is 7.4.