Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1301.1696 · Physical Review Letters

Three-Wave Mixing with Three Incoming Waves: Signal-Idler Coherent Attenuation and Gain Enhancement in a Parametric Amplifier

Flavius Schackert, Ananda Roy, Michael J. Hatridge, Michel Devoret, A. Douglas Stone

Published Aug 16, 2013• 18 citations
arXivHTMLPDF

Abstract

We demonstrate the time-reversed process of nondegenerate three-wave parametric amplification from three distinct sources in the fully nonlinear regime using a Josephson amplifier. In the reverse process, coherent attenuation, signal and idler beams destructively interfere in the presence of a pump to generate additional pump photons. This effect is observed through the symmetric phase-dependent amplification and attenuation of the signal and idler beams and, in the depleted pump regime, through the phase-dependent modulation of the amplifier gain, directly probing the enhancement of the pump. Results are found to be in good agreement with theory.

DOI
10.1103/physrevlett.111.073903

Related papers

Quantum-limited parametric amplification with Josephson circuits in the regime of pump depletion

Ananda Roy, Michel Devoret

Linear parametric amplification is a key operation in information processing. Our interest here is quantum-limited parametric amplification, i.e., amplification of quantum signals while adding the minimum amount of noise allowed by quantum mechanics, which is essential for any viable implementation of quantum information processing. We describe parametric amplifiers based on the dispersive nonlinearity of Josephson junctions driven with appropriate tones playing the role of pumps. We discuss two defining characteristics in the architecture of these amplifiers: the number of modes occupied by the signal, idler, and pump waves and the number of independent ports through which these waves enter into the circuit. The scattering properties of these amplifiers are also reviewed. The main focus of this work are the computations of the dynamic range and phase-space distributions of the fluctuations of the modes of the amplifiers.

arXiv:1801.10115•Physical review. B./Physical review. B•Jul 5, 2018•39 citations

Josephson parametric converter saturation and higher order effects

G. Liu, Tzu-Chiao Chien, Xi Cao +4 more

Microwave parametric amplifiers based on Josephson junctions have become indispensable components of many quantum information experiments. One key limitation which has not been well predicted by theory is the gain saturation behavior which limits the amplifier's ability to process large amplitude signals. The typical explanation for this behavior in phase-preserving amplifiers based on three-wave mixing, such as the Josephson Parametric Converter, is pump depletion, in which the consumption of pump photons to produce amplification results in a reduction in gain. However, in this work, we present experimental data and theoretical calculations showing that the fourth-order Kerr nonlinearities inherent in Josephson junctions are the dominant factor. The Kerr-based theory has the unusual property of causing saturation to both lower and higher gains, depending on bias conditions. This work presents an efficient methodology for optimizing device performance in the presence of Kerr nonlinearities while retaining device tunability and points to the necessity of controlling higher-order Hamiltonian terms to make further improvements in parametric devices.

arXiv:1703.04425•Applied Physics Letters•Nov 13, 2017•47 citations

Signal-to-pump back action and self-oscillation in double-pump Josephson parametric amplifier

Archana Kamal, Adam Henry Marblestone, Michel Devoret

We present the theory of a Josephson parametric amplifier employing two-pump sources. Our calculations are based on input-output theory, and can easily be generalized to any coupled system involving parametric interactions. We analyze the operation of the device, taking into account the feedback introduced by the reaction of the signal and noise on the pump power, and in this framework, compute the response functions of interest---signal and idler gains, internal gain of the amplifier, and self-oscillation signal amplitude. To account for this back action between signal and pump, we adopt a mean-field approach and self-consistently explore the boundary between amplification and self-oscillation. The coincidence of bifurcation and self-oscillation thresholds reveals that the origin of coherent emission of the amplifier lies in the multiwave mixing of the noise components. Incorporation of the back action leads the system to exhibit hysteresis, dependent on parameters such as temperature and detuning from resonance. Our analysis also shows that the resonance condition itself changes in the presence of back action and this can be understood in terms of the change in plasma frequency of the junction. The potential of the double-pump amplifier for quantum-limited measurements and as a squeezer is also discussed.

arXiv:0902.0007•Physical Review B•May 13, 2009•69 citations

Field-induced phase-matching in Josephson traveling wave parametric amplifiers

Daniil E. Bazulin, S. Gandorfer, N. Bruckmoser +9 more

Superconducting Josephson traveling wave parametric amplifiers (JTWPAs) enable broadband, quantum-limited amplification of weak microwave signals. JTWPAs are essential for the single-shot readout of superconducting qubits, broadband vacuum squeezing, or the generation of microwave cluster states. Phase-matching between signal and pump modes in such JTWPAs represents a major engineering challenge, which is typically solved by integrating resonators in a nonlinear medium in order to tailor electromagnetic dispersion relations and achieve a broadband, high-gain amplification. Here, we experimentally demonstrate a phase-matching approach using a homogeneous nonlinear medium based on Josephson elements by exploiting a magnetic field inhomogeneity. We show how the latter may lead to the sign reversal of the 3-wave mixing nonlinearity and stabilization of the parametric amplification. We envision this technique as a viable alternative to conventional phase-matching approaches.

arXiv:2611.13084•Nov 9, 2026•0 citations

Quantum noise in light amplifiers

Matthew J. Collett, Daniel F. Walls

The principal problem of light amplifiers is to find a means to amplify a coherent amplitude without decreasing the SNR. Consider a signal with amplitude squeezed quantum fluctuations, that is, less noise in the amplitude quadrature than the phase quadrature. The objective is to find a phase sensitive amplifier, which, while amplifying the coherent amplitude, adds quantum noise preferentially to the phase quadrature. We take as a concrete model for the amplifier an intracavity parametric amplifier. We go beyond the usual linear analysis and include the nonlinear regime where pump depletion is important. We find that in the linear region the quantum noise added by the amplification process may be reduced by squeezing the idler mode, while in the nonlinear regime the quantum fluctuations from the pump become more important. These results are of direct application to practical light amplifiers.

Annual Meeting Optical Society of America•Jan 1, 1988•0 citations

Impact of Pump Phase-Noise on Josephson Traveling-Wave Parametric Amplifiers

Daryoush Shiri, Likai Yang, Saesun Kim +3 more

Superconducting traveling-wave parametric amplifiers (TWPAs) are essential elements for enhancing the signal-to-noise ratio (SNR) and thus the read-out fidelity of superconducting qubits because of their high gain and near quantum-limited noise. However, the impact of the pump source, e.g., phase noise on these amplifiers, has not yet been studied. In this work, we show that among the two amplification processes in JTWPAs, the three-wave mixing (3WM) process is more sensitive to the pump phase noise than the four-wave mixing (4WM) process. We show that the even-order nonlinearity of 4th order and above in three-wave mixing is responsible for more than 10 dB increase of phase noise at high frequency offsets within the phase noise mask as the power of the pump increases. A polynomial model of the amplifier and cyclo-stationary property of phase noise also corroborate with the simulations. The Harmonic Balance (HB) periodic noise analysis tool and Leeson phase noise model in Keysight Advanced Design System (ADS) simulator were used in this study.

quant-pharXiv:2604.08955•Apr 13, 2026•1 citation
We demonstrate the time-reversed process of nondegenerate three-wave parametric amplification from three distinct sources in the fully nonlinear regime using a Josephson amplifier. In the reverse process, coherent attenuation, signal and idler beams destructively interfere in the presence of a pump to generate additional pump photons. This effect is observed through the symmetric phase-dependent amplification and attenuation of the signal and idler beams and, in the depleted pump regime, through the phase-dependent modulation of the amplifier gain, directly probing the enhancement of the pump. Results are found to be in good agreement with theory.
Linear parametric amplification is a key operation in information processing. Our interest here is quantum-limited parametric amplification, i.e., amplification of quantum signals while adding the minimum amount of noise allowed by quantum mechanics, which is essential for any viable implementation of quantum information processing. We describe parametric amplifiers based on the dispersive nonlinearity of Josephson junctions driven with appropriate tones playing the role of pumps. We discuss two defining characteristics in the architecture of these amplifiers: the number of modes occupied by the signal, idler, and pump waves and the number of independent ports through which these waves enter into the circuit. The scattering properties of these amplifiers are also reviewed. The main focus of this work are the computations of the dynamic range and phase-space distributions of the fluctuations of the modes of the amplifiers.
Microwave parametric amplifiers based on Josephson junctions have become indispensable components of many quantum information experiments. One key limitation which has not been well predicted by theory is the gain saturation behavior which limits the amplifier's ability to process large amplitude signals. The typical explanation for this behavior in phase-preserving amplifiers based on three-wave mixing, such as the Josephson Parametric Converter, is pump depletion, in which the consumption of pump photons to produce amplification results in a reduction in gain. However, in this work, we present experimental data and theoretical calculations showing that the fourth-order Kerr nonlinearities inherent in Josephson junctions are the dominant factor. The Kerr-based theory has the unusual property of causing saturation to both lower and higher gains, depending on bias conditions. This work presents an efficient methodology for optimizing device performance in the presence of Kerr nonlinearities while retaining device tunability and points to the necessity of controlling higher-order Hamiltonian terms to make further improvements in parametric devices.
We present the theory of a Josephson parametric amplifier employing two-pump sources. Our calculations are based on input-output theory, and can easily be generalized to any coupled system involving parametric interactions. We analyze the operation of the device, taking into account the feedback introduced by the reaction of the signal and noise on the pump power, and in this framework, compute the response functions of interest---signal and idler gains, internal gain of the amplifier, and self-oscillation signal amplitude. To account for this back action between signal and pump, we adopt a mean-field approach and self-consistently explore the boundary between amplification and self-oscillation. The coincidence of bifurcation and self-oscillation thresholds reveals that the origin of coherent emission of the amplifier lies in the multiwave mixing of the noise components. Incorporation of the back action leads the system to exhibit hysteresis, dependent on parameters such as temperature and detuning from resonance. Our analysis also shows that the resonance condition itself changes in the presence of back action and this can be understood in terms of the change in plasma frequency of the junction. The potential of the double-pump amplifier for quantum-limited measurements and as a squeezer is also discussed.
Superconducting Josephson traveling wave parametric amplifiers (JTWPAs) enable broadband, quantum-limited amplification of weak microwave signals. JTWPAs are essential for the single-shot readout of superconducting qubits, broadband vacuum squeezing, or the generation of microwave cluster states. Phase-matching between signal and pump modes in such JTWPAs represents a major engineering challenge, which is typically solved by integrating resonators in a nonlinear medium in order to tailor electromagnetic dispersion relations and achieve a broadband, high-gain amplification. Here, we experimentally demonstrate a phase-matching approach using a homogeneous nonlinear medium based on Josephson elements by exploiting a magnetic field inhomogeneity. We show how the latter may lead to the sign reversal of the 3-wave mixing nonlinearity and stabilization of the parametric amplification. We envision this technique as a viable alternative to conventional phase-matching approaches.
The principal problem of light amplifiers is to find a means to amplify a coherent amplitude without decreasing the SNR. Consider a signal with amplitude squeezed quantum fluctuations, that is, less noise in the amplitude quadrature than the phase quadrature. The objective is to find a phase sensitive amplifier, which, while amplifying the coherent amplitude, adds quantum noise preferentially to the phase quadrature. We take as a concrete model for the amplifier an intracavity parametric amplifier. We go beyond the usual linear analysis and include the nonlinear regime where pump depletion is important. We find that in the linear region the quantum noise added by the amplification process may be reduced by squeezing the idler mode, while in the nonlinear regime the quantum fluctuations from the pump become more important. These results are of direct application to practical light amplifiers.
Superconducting traveling-wave parametric amplifiers (TWPAs) are essential elements for enhancing the signal-to-noise ratio (SNR) and thus the read-out fidelity of superconducting qubits because of their high gain and near quantum-limited noise. However, the impact of the pump source, e.g., phase noise on these amplifiers, has not yet been studied. In this work, we show that among the two amplification processes in JTWPAs, the three-wave mixing (3WM) process is more sensitive to the pump phase noise than the four-wave mixing (4WM) process. We show that the even-order nonlinearity of 4th order and above in three-wave mixing is responsible for more than 10 dB increase of phase noise at high frequency offsets within the phase noise mask as the power of the pump increases. A polynomial model of the amplifier and cyclo-stationary property of phase noise also corroborate with the simulations. The Harmonic Balance (HB) periodic noise analysis tool and Leeson phase noise model in Keysight Advanced Design System (ADS) simulator were used in this study.