Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1211.1425 · Applied Physics Express

Nonlatching Superconducting Nanowire Single-Photon Detection with Quasi-Constant-Voltage Bias

Deng-Kuan Liu, Si-Jing Chen, Li-Xing You, Yong-Liang Wang, Shigehito Miki, Zhen Wang, Xiao-Ming Xie, Mian-Heng Jiang

Published Nov 12, 2012• 30 citations
arXivHTMLPDF

Abstract

Latching is a serious issue in superconducting nanowire single-photon detector (SNSPD) technology. By extensively studying the electrical transportation characteristics of SNSPD with different bias schemes, we conclude that latching is a result of the improper bias to SNSPD. With the quasi-constant-voltage bias scheme, the intrinsic nonlatching nature of SNSPD is observed and discussed. The SNSPD working in the nonlatching bias shows a smaller jitter and a higher pulse amplitude than that in the previous anti-latching method. The quantum efficiency of SNSPD with the pulsed photon frequency up to 3 GHz is measured successfully, which further proves the nonlatching operation of SNSPD.

DOI
10.1143/apex.5.125202

Related papers

Electrical Characteristics of Superconducting Nanowire Single Photon Detector

D. K. Liu, Lixing You, Shijian Chen +5 more

By changing the bias scheme of a superconducting nanowire single photon detector (SNSPD), the current-voltage (I-V) characteristics of SNSPDs are extensively studied. Using a quasi-constant-voltage bias, the SNSPD nonlatching property is observed in the low voltage range. When the bias current surpasses the critical current, a thermal relaxation oscillation occurs because of the hotspot's periodic appearance, growth, and disappearance. This produces a smooth transition in theI-Vcurve instead of latching. The oscillation frequency is proportional to the voltage of the SNSPD. A linear dependence of the oscillation frequency on the SNSPD voltage is derived from the circuit model of SNSPD electronics, which fits well with the experimental results. The kinetic inductance of the SNSPD is extracted from the fitting as the sole parameter. In the high-voltage range, theI-Vcurve is deduced from Skocpol, Beasley, and Tinkham's self-heating hotspot model, which is consistent with the experimental result. By measuring the return current, we obtained a heat transfer coefficient (α) of 0.7-2 × 105W · m2· K1between the nanowire and the substrate.

IEEE Transactions on Applied Superconductivity•Feb 7, 2013•21 citations

Improving superconducting nanowire single-photon detectors made of NbTiN using a novel method to characterize the timing jitter (Conference Presentation)

Rasmus Flaschmann, Lucio Zugliani, Christian Schmid +10 more

In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.

Quantum Nanophotonic Materials, Devices, and Systems•Oct 4, 2022•0 citations

Jitter analysis of a superconducting nanowire single photon detector

Lixing You, Xiaoyan Yang, Yuhao He +9 more

Jitter is one of the key parameters for a superconducting nanowire single photon detector (SNSPD). Using an optimized time-correlated single photon counting system for jitter measurement, we extensively studied the dependence of system jitter on the bias current and working temperature. The signal-to-noise ratio of the single-photon-response pulse was proven to be an important factor in system jitter. The final system jitter was reduced to 18 ps by using a high-critical-current SNSPD, which showed an intrinsic SNSPD jitter of 15 ps. A laser ranging experiment using a 15-ps SNSPD achieved a record depth resolution of 3 mm at a wavelength of 1550 nm.

arXiv:1308.0763•AIP Advances•Jul 1, 2013•131 citations

Quasi-Gated Superconducting Nanowire Single-Photon Detector

Labao Zhang, Sen Zhang, Tao Xu +4 more

Superconducting nanowire single-photon detectors (SNSPDs) are attractive because of their wide response band, low noise, and high repetition rate in practical applications. Owing to these advantage, SNSPDs are particularly useful for high efficiency (>80%) in laser-ranging systems operating at 1064 nm. However, the superconducting nanowire may latch in a permanent resistive state because of the backscattering problem, which may prevent it from detecting targeted reflection photons. This paper proposes an SNSPD that operates in a quasi-gated mode with the help of a programmed source and improved feeding circuit. The programmed source switches the SNSPD off at a low level, and switches it on at a high level. Such an on-off switching process enables the SNSPD to recover automatically from latching through compulsory initialization in each period, therefore, resolving the problem caused by strong backscatterings in laser ranging systems. The quasi-gated SNSPD can also be used in other applications operating in a nonstop mode, even with occasional latchings.

IEEE Transactions on Applied Superconductivity•Jan 17, 2017•14 citations

Characterization of parallel superconducting nanowire single photon detectors

Mikkel Ejrnaes, A. Casaburi, Orlando Quaranta +6 more

Superconducting nanowire single photon detectors (SNSPDs) have been realized using an innovative parallel wire configuration. This configuration allows, at the same time, a large detection area and a fast response, with the additional advantage of large signal amplitudes. The detectors have been thoroughly characterized in terms of signal properties (amplitude, risetime and falltime), detector operation (latching and not latching) and quantum efficiency (at 850 nm). It has been shown that the parallel SNSPD is able to provide significantly higher maximum count rates for large area SNSPDs than meandered SNSPDs. Through a proper parallel wire configuration the increase in maximum count rate can be obtained without latching problems.

Superconductor Science and Technology•Mar 30, 2009•57 citations

Modeling the effect of superconductor properties on sensitivity and responsivity of superconducting nanowire single photon detector

S. Haldar, Arun Sehrawat, Krishna Balasubramanian

Superconducting nanowire single photon detector (SNSPD) is a leading candidate for applications requiring the fundamental limit of light detection at high detection rates. While SNSPD technology employing nanowires from conventional low temperature superconducting detectors is mature with several commercial solutions, other material options with higher transition temperature approaching liquid nitrogen with faster signal responses are actively being explored. In this context, we develop a comprehensive model that predicts the final potential response from an SNSPD incorporating several physical and material aspects. A phase diagram of photon detection is developed that describes the latching phases and the photon sensitivity as a function of biasing current and temperature for both low temperature and high temperature superconductors. On the one hand, while low temperature superconductors are observed to be more sensitive than high temperature superconductors (HTSs) under any given biasing condition, a biasing window for a single photon detection with HTS nanowires is identified. On the other hand, HTS nanowires demonstrate three orders of magnitude faster response times than the low temperature superconductor nanowire at the same biasing condition, making it uniquely suited for several practical applications.

Journal of Applied Physics•Nov 6, 2024•4 citations
Latching is a serious issue in superconducting nanowire single-photon detector (SNSPD) technology. By extensively studying the electrical transportation characteristics of SNSPD with different bias schemes, we conclude that latching is a result of the improper bias to SNSPD. With the quasi-constant-voltage bias scheme, the intrinsic nonlatching nature of SNSPD is observed and discussed. The SNSPD working in the nonlatching bias shows a smaller jitter and a higher pulse amplitude than that in the previous anti-latching method. The quantum efficiency of SNSPD with the pulsed photon frequency up to 3 GHz is measured successfully, which further proves the nonlatching operation of SNSPD.
By changing the bias scheme of a superconducting nanowire single photon detector (SNSPD), the current-voltage (I-V) characteristics of SNSPDs are extensively studied. Using a quasi-constant-voltage bias, the SNSPD nonlatching property is observed in the low voltage range. When the bias current surpasses the critical current, a thermal relaxation oscillation occurs because of the hotspot's periodic appearance, growth, and disappearance. This produces a smooth transition in theI-Vcurve instead of latching. The oscillation frequency is proportional to the voltage of the SNSPD. A linear dependence of the oscillation frequency on the SNSPD voltage is derived from the circuit model of SNSPD electronics, which fits well with the experimental results. The kinetic inductance of the SNSPD is extracted from the fitting as the sole parameter. In the high-voltage range, theI-Vcurve is deduced from Skocpol, Beasley, and Tinkham's self-heating hotspot model, which is consistent with the experimental result. By measuring the return current, we obtained a heat transfer coefficient (α) of 0.7-2 × 105W · m2· K1between the nanowire and the substrate.
In recent years, Superconducting Nanowire Single-Photon Detectors (SNSPDs) have obtained tremendous attention as a possible key technology for photonic quantum processing and faint light detection. Here, we present our recent progress on engineering of the properties of NbTiN SNSPDs fabricated on various substrates measured. We discuss approaches to simultaneously improve the most important figures of merit (DCR, dead time, timing jitter, efficiency) as well as efficient characterization methods. Specifically, for the latter we investigate the impact of the substrate material on the performance parameters as well as the fundamental interrelation of the resulting voltage pulse properties, such as pulse height, rise time and timing jitter, and their dependence on the applied bias current.
Jitter is one of the key parameters for a superconducting nanowire single photon detector (SNSPD). Using an optimized time-correlated single photon counting system for jitter measurement, we extensively studied the dependence of system jitter on the bias current and working temperature. The signal-to-noise ratio of the single-photon-response pulse was proven to be an important factor in system jitter. The final system jitter was reduced to 18 ps by using a high-critical-current SNSPD, which showed an intrinsic SNSPD jitter of 15 ps. A laser ranging experiment using a 15-ps SNSPD achieved a record depth resolution of 3 mm at a wavelength of 1550 nm.
Superconducting nanowire single-photon detectors (SNSPDs) are attractive because of their wide response band, low noise, and high repetition rate in practical applications. Owing to these advantage, SNSPDs are particularly useful for high efficiency (>80%) in laser-ranging systems operating at 1064 nm. However, the superconducting nanowire may latch in a permanent resistive state because of the backscattering problem, which may prevent it from detecting targeted reflection photons. This paper proposes an SNSPD that operates in a quasi-gated mode with the help of a programmed source and improved feeding circuit. The programmed source switches the SNSPD off at a low level, and switches it on at a high level. Such an on-off switching process enables the SNSPD to recover automatically from latching through compulsory initialization in each period, therefore, resolving the problem caused by strong backscatterings in laser ranging systems. The quasi-gated SNSPD can also be used in other applications operating in a nonstop mode, even with occasional latchings.
Superconducting nanowire single photon detectors (SNSPDs) have been realized using an innovative parallel wire configuration. This configuration allows, at the same time, a large detection area and a fast response, with the additional advantage of large signal amplitudes. The detectors have been thoroughly characterized in terms of signal properties (amplitude, risetime and falltime), detector operation (latching and not latching) and quantum efficiency (at 850 nm). It has been shown that the parallel SNSPD is able to provide significantly higher maximum count rates for large area SNSPDs than meandered SNSPDs. Through a proper parallel wire configuration the increase in maximum count rate can be obtained without latching problems.
Superconducting nanowire single photon detector (SNSPD) is a leading candidate for applications requiring the fundamental limit of light detection at high detection rates. While SNSPD technology employing nanowires from conventional low temperature superconducting detectors is mature with several commercial solutions, other material options with higher transition temperature approaching liquid nitrogen with faster signal responses are actively being explored. In this context, we develop a comprehensive model that predicts the final potential response from an SNSPD incorporating several physical and material aspects. A phase diagram of photon detection is developed that describes the latching phases and the photon sensitivity as a function of biasing current and temperature for both low temperature and high temperature superconductors. On the one hand, while low temperature superconductors are observed to be more sensitive than high temperature superconductors (HTSs) under any given biasing condition, a biasing window for a single photon detection with HTS nanowires is identified. On the other hand, HTS nanowires demonstrate three orders of magnitude faster response times than the low temperature superconductor nanowire at the same biasing condition, making it uniquely suited for several practical applications.