Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1208.2421 · Nanotechnology

Nanoscale broadband transmission lines for spin qubit control

J P Dehollain, Jarryd J. Pla, E Siew, Kuan Yen Tan, Andrew S. Dzurak, Andrea Morello

Published Dec 7, 2012• 81 citations
arXivHTMLPDF

Abstract

The intense interest in spin-based quantum information processing has caused an increasing overlap between the two traditionally distinct disciplines of magnetic resonance and nanotechnology. In this work we discuss rigorous design guidelines to integrate microwave circuits with charge-sensitive nanostructures, and describe how to simulate such structures accurately and efficiently. We present a new design for an on-chip, broadband, nanoscale microwave line that optimizes the magnetic field used to drive a spin-based quantum bit (or qubit) while minimizing the disturbance to a nearby charge sensor. This new structure was successfully employed in a single-spin qubit experiment, and shows that the simulations accurately predict the magnetic field values even at frequencies as high as 30 GHz.

DOI
10.1088/0957-4484/24/1/015202

Related papers

Variable bandwidth, high efficiency microwave resonator for control of spin-qubits in nitrogen-vacancy centers

Anton Savitsky, Jingfu Zhang, Dieter Suter

Nitrogen-Vacancy (NV) centers in diamond are attractive tools for sensing and quantum information. Realization of this potential requires effective tools for controlling the spin degree of freedom by microwave (mw) magnetic fields. In this work, we present a planar microwave resonator optimized for microwave-optical double resonance experiments on single NV centers in diamond. It consists of a piece of wide microstrip line, which is symmetrically connected to two 50 Ω microstrip feed lines. In the center of the resonator, an Ω-shaped loop focuses the current and the mw magnetic field. It generates a relatively homogeneous magnetic field over a volume of 0.07 × 0.1 mm3. It can be operated at 2.9 GHz in both transmission and reflection modes with bandwidths of 1000 and 400 MHz, respectively. The high power-to-magnetic field conversion efficiency allows us to produce π-pulses with a duration of 50 ns with only about 200 and 50 mW microwave power in transmission and reflection, respectively. The transmission mode also offers capability for efficient radio frequency excitation. The resonance frequency can be tuned between 1.3 and 6 GHz by adjusting the length of the resonator. This will be useful for experiments on NV-centers at higher external magnetic fields and on different types of optically active spin centers.

arXiv:2301.03911•Review of Scientific Instruments•Feb 1, 2023•8 citations

Study of Scalable Thermally Insulated Transmission Line for Superconducting Quantum Computers

Maria Fuwa, Tomonori Arakawa, Noriyoshi Hashimoto +4 more

Since superconducting quantum computers use microwave signals to control and readout their qubits, microwave transmission lines and circuits that can be used under cryogenic conditions are required. For microwave transmission lines, thermal insulation is essential to enhance wiring density and to prevent parasitic heating that can lead to increased computational errors. Thus, here we design and characterize a scalable, thermally insulated microwave transmission line. The transmission line designed for superconducting qubit readout at 5 GHz band achieves both thermal insulation and low loss, by employing resonator-based impedance matching in a microstripline structure. A flexible cable including eight planar transmission lines was designed, fabricated and characterized using S-parameter measurement, demonstrating low crosstalk below 40dB and signal attenuation of -23.5±0.07dB; this coincides with electromagnetic simulations. These microwave properties remained stable across a wide temperature range from room temperature down to 4 K, including steep gradients. The integration of chip attenuators further reduces thermal noise and protects sensitive cryogenic components. Our approach offers a promising solution for compact, high-density microwave wiring using flat cables under thermal gradients, necessary for large scale quantum computing.

IEICE Transactions on Electronics•Apr 16, 2026•0 citations

High-Fidelity Microwave Control of Single-Atom Spin Qubits in Silicon

Juan P Lorenzana

Abstract : As classical computers begin to reach their fundamental performance limits, quantum computers will be an invaluable tool for the advance of science and technology. The trillion dollar silicon electronics industry sets the perfect stage for the evolution of quantum computation, yet it has so far proved to be a tough challenge to implement all the elements needed to build a scalable quantum computer in silicon. This thesis presents the first experimental demonstration of the full operation of single-spin qubits in Si. Our qubits consist of the electron and nuclear spins of a single phosphorus atom, implanted in a Si substrate, and controlled by a gated nanostructure. We describe an experimental setup tailored to minimise electron temperature and perform realtime data acquisition, analysis and instrument control. We present modeling, simulation and characterisation of a novel nanoscale coplanar antenna for spin control, designed to work at frequencies up to 50 GHz. These tools have allowed us to demonstrate the first ever single-atom spin-qubits in natural silicon, leading the way to demonstrating record qubit performances in isotopically purified 28Si: an electron spin qubit with measurement and control fidelities 97% and coherence times of 0.5 seconds; and a nuclear spin qubit with fidelities 99.99% and a record single-spin coherence of 30 s. We have performed noise spectroscopy in our system and concluded that decoherence is currently limited by magnetic noise originating from our broadband antenna.

•Jul 8, 2014•0 citations

Scanning-Probe Quantum Sensing of a Microwave and Static Magnetic Field Response of an On-Chip Superconducting Resonator

Senlei Li, Jingcheng Zhou, 熊泽龙 +2 more

Superconducting resonators are finding increasing applications in designing advanced quantum circuits for an ongoing sensing, metrology, and computing technological revolution. A detailed knowledge of the microscopic electromagnetic properties of superconducting resonators is directly relevant for their further improvements on circuitry design and device performance. Here, we introduce scanning-probe quantum microscopy to report nanoscale sensing of the microwave and static magnetic field environment of an on-chip niobium (Nb) superconducting resonator. Taking advantage of Rabi oscillation measurements, we show that microwave magnetic fields generated by the superconducting resonator mode can be utilized to achieve coherent control of a quantum spin sensor. We further visualize the static electromagnetic field response of the Nb resonator, showing magnetic field-induced formation, evolution, and depinning of superconducting vortices. Our results provide insights into future design, testing, and evaluation of solid-state superconducting resonators, highlighting the potential of quantum sensors as a local probe to investigate electromagnetic properties of superconducting quantum circuits.

arXiv:2606.20904•Nano Letters•Aug 7, 2026•1 citation

Wideband microwave magnetometry using a nitrogen-vacancy center in diamond

Rui Li, Chengjie Wang, Cheng Zhi +6 more

Microwave magnetometry is essential to a variety of modern electronic techniques, most notably integrated circuits. The nitrogen-vacancy center in diamond has shown the ability of nanoscale resolution for the microwave magnetic field measurement and imaging. However, the characterization of the wideband magnetic field remains a challenge. Here we experimentally demonstrated a wideband microwave magnetometry with an off-resonance protocol based on the Bloch-Siegert shift effect. The off-resonance microwave magnetic field shifts the energy level of the nitrogen-vacancy center. It results in a phase accumulation during the evolution of the superposition state of the quantum sensor. According to this effect, by optimizing the evolution time, we experimentally verified the bandwidth widening of an order of magnitude compared with the Rabi oscillation, i.e., on-resonance method with an acceptable decrease of the sensitivity. In addition, we extracted the microwave frequency with a two-qubit system, which consists of a nitrogen-vacancy center and a nearby $^{13}\mathrm{C}$ nucleus. This approach enables the building of a wideband and potentially nanoscale microwave magnetometry to allow various potential applications, such as electronic circuits development.

Physical Review A•Jun 24, 2019•6 citations

Fast coherent control of a charge qubit on solid neon with a spin-qubit-compatible resonator

Jun Wang, Yiran Tian, Ivan Grytsenko +7 more

Electrons floating in vacuum provide a clean platform for quantum information processing owing to their isolation from material defects. In particular, electrons on solid neon have emerged as a promising qubit platform because of their potentially long coherence times. Here, toward spin-qubit realization, we couple a single electron on solid neon to a magnetic-field-compatible superconducting NbTiN nanowire resonator. We realize a charge qubit and demonstrate microwave readout and coherent control, with Rabi frequencies up to 76 MHz, an order of magnitude larger than in previous studies. Under strong driving, we observe a qubit frequency shift from nonlinear interactions with the intense microwave field. Deterministic electron trapping at an intended position remains challenging due to solid neon surface roughness; we characterize the electron's position from its differential coupling to distinct electrodes. Although not trapped at an intended position, our estimates indicate that spin-qubit demonstrations remain feasible.

cond-mat.mes-hallCross-listedarXiv:2605.31185•Jun 1, 2026•1 citation
The intense interest in spin-based quantum information processing has caused an increasing overlap between the two traditionally distinct disciplines of magnetic resonance and nanotechnology. In this work we discuss rigorous design guidelines to integrate microwave circuits with charge-sensitive nanostructures, and describe how to simulate such structures accurately and efficiently. We present a new design for an on-chip, broadband, nanoscale microwave line that optimizes the magnetic field used to drive a spin-based quantum bit (or qubit) while minimizing the disturbance to a nearby charge sensor. This new structure was successfully employed in a single-spin qubit experiment, and shows that the simulations accurately predict the magnetic field values even at frequencies as high as 30 GHz.
Nitrogen-Vacancy (NV) centers in diamond are attractive tools for sensing and quantum information. Realization of this potential requires effective tools for controlling the spin degree of freedom by microwave (mw) magnetic fields. In this work, we present a planar microwave resonator optimized for microwave-optical double resonance experiments on single NV centers in diamond. It consists of a piece of wide microstrip line, which is symmetrically connected to two 50 Ω microstrip feed lines. In the center of the resonator, an Ω-shaped loop focuses the current and the mw magnetic field. It generates a relatively homogeneous magnetic field over a volume of 0.07 × 0.1 mm3. It can be operated at 2.9 GHz in both transmission and reflection modes with bandwidths of 1000 and 400 MHz, respectively. The high power-to-magnetic field conversion efficiency allows us to produce π-pulses with a duration of 50 ns with only about 200 and 50 mW microwave power in transmission and reflection, respectively. The transmission mode also offers capability for efficient radio frequency excitation. The resonance frequency can be tuned between 1.3 and 6 GHz by adjusting the length of the resonator. This will be useful for experiments on NV-centers at higher external magnetic fields and on different types of optically active spin centers.
Since superconducting quantum computers use microwave signals to control and readout their qubits, microwave transmission lines and circuits that can be used under cryogenic conditions are required. For microwave transmission lines, thermal insulation is essential to enhance wiring density and to prevent parasitic heating that can lead to increased computational errors. Thus, here we design and characterize a scalable, thermally insulated microwave transmission line. The transmission line designed for superconducting qubit readout at 5 GHz band achieves both thermal insulation and low loss, by employing resonator-based impedance matching in a microstripline structure. A flexible cable including eight planar transmission lines was designed, fabricated and characterized using S-parameter measurement, demonstrating low crosstalk below 40dB and signal attenuation of -23.5±0.07dB; this coincides with electromagnetic simulations. These microwave properties remained stable across a wide temperature range from room temperature down to 4 K, including steep gradients. The integration of chip attenuators further reduces thermal noise and protects sensitive cryogenic components. Our approach offers a promising solution for compact, high-density microwave wiring using flat cables under thermal gradients, necessary for large scale quantum computing.
Abstract : As classical computers begin to reach their fundamental performance limits, quantum computers will be an invaluable tool for the advance of science and technology. The trillion dollar silicon electronics industry sets the perfect stage for the evolution of quantum computation, yet it has so far proved to be a tough challenge to implement all the elements needed to build a scalable quantum computer in silicon. This thesis presents the first experimental demonstration of the full operation of single-spin qubits in Si. Our qubits consist of the electron and nuclear spins of a single phosphorus atom, implanted in a Si substrate, and controlled by a gated nanostructure. We describe an experimental setup tailored to minimise electron temperature and perform realtime data acquisition, analysis and instrument control. We present modeling, simulation and characterisation of a novel nanoscale coplanar antenna for spin control, designed to work at frequencies up to 50 GHz. These tools have allowed us to demonstrate the first ever single-atom spin-qubits in natural silicon, leading the way to demonstrating record qubit performances in isotopically purified 28Si: an electron spin qubit with measurement and control fidelities 97% and coherence times of 0.5 seconds; and a nuclear spin qubit with fidelities 99.99% and a record single-spin coherence of 30 s. We have performed noise spectroscopy in our system and concluded that decoherence is currently limited by magnetic noise originating from our broadband antenna.
Superconducting resonators are finding increasing applications in designing advanced quantum circuits for an ongoing sensing, metrology, and computing technological revolution. A detailed knowledge of the microscopic electromagnetic properties of superconducting resonators is directly relevant for their further improvements on circuitry design and device performance. Here, we introduce scanning-probe quantum microscopy to report nanoscale sensing of the microwave and static magnetic field environment of an on-chip niobium (Nb) superconducting resonator. Taking advantage of Rabi oscillation measurements, we show that microwave magnetic fields generated by the superconducting resonator mode can be utilized to achieve coherent control of a quantum spin sensor. We further visualize the static electromagnetic field response of the Nb resonator, showing magnetic field-induced formation, evolution, and depinning of superconducting vortices. Our results provide insights into future design, testing, and evaluation of solid-state superconducting resonators, highlighting the potential of quantum sensors as a local probe to investigate electromagnetic properties of superconducting quantum circuits.
Microwave magnetometry is essential to a variety of modern electronic techniques, most notably integrated circuits. The nitrogen-vacancy center in diamond has shown the ability of nanoscale resolution for the microwave magnetic field measurement and imaging. However, the characterization of the wideband magnetic field remains a challenge. Here we experimentally demonstrated a wideband microwave magnetometry with an off-resonance protocol based on the Bloch-Siegert shift effect. The off-resonance microwave magnetic field shifts the energy level of the nitrogen-vacancy center. It results in a phase accumulation during the evolution of the superposition state of the quantum sensor. According to this effect, by optimizing the evolution time, we experimentally verified the bandwidth widening of an order of magnitude compared with the Rabi oscillation, i.e., on-resonance method with an acceptable decrease of the sensitivity. In addition, we extracted the microwave frequency with a two-qubit system, which consists of a nitrogen-vacancy center and a nearby 13C^{13}\mathrm{C}13C nucleus. This approach enables the building of a wideband and potentially nanoscale microwave magnetometry to allow various potential applications, such as electronic circuits development.
Electrons floating in vacuum provide a clean platform for quantum information processing owing to their isolation from material defects. In particular, electrons on solid neon have emerged as a promising qubit platform because of their potentially long coherence times. Here, toward spin-qubit realization, we couple a single electron on solid neon to a magnetic-field-compatible superconducting NbTiN nanowire resonator. We realize a charge qubit and demonstrate microwave readout and coherent control, with Rabi frequencies up to 76 MHz, an order of magnitude larger than in previous studies. Under strong driving, we observe a qubit frequency shift from nonlinear interactions with the intense microwave field. Deterministic electron trapping at an intended position remains challenging due to solid neon surface roughness; we characterize the electron's position from its differential coupling to distinct electrodes. Although not trapped at an intended position, our estimates indicate that spin-qubit demonstrations remain feasible.