Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1207.3313 · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

Modeling of quantum noise and the quality of hardware components of quantum computers

Yu. I. Bogdanov, Andrey Yu. Chernyavskiy, Alexander Holevo, V. F. Lukichev, A. A. Orlikovsky

Published Jan 8, 2013• 14 citations
arXivHTMLPDF

Abstract

In the present paper methods and algorithms of modeling quantum operations for quantum computer integrated circuits design are developed. The results of modeling of practically important quantum gates: controlled-NOT (CNOT), and controlled Z-transform (CZ) subject to different decoherence mechanisms are presented. These mechanisms include analysis of depolarizing quantum noise and processes of amplitude and phase relaxation.

DOI
10.1117/12.2017414

Related papers

Quantum noise and the quality control of hardware components of quantum computers based on superconducting phase qubits

Yu. I. Bogdanov, Vladimir F. Lukichev, S. A. Nuyanzin +1 more

A general approach to the provision of the quality and efficiency of quantum information technologies is proposed. The approach is based on the analysis of quantum noise generated on the implementation of quantum operations. The method of precision quantum measurements of logic quantum gates based on superconducting phase qubits is developed. The universal method of quantum state and process tomography is used to carry out a comprehensive analysis of the fidelity of the tomography of two-qubit SQiSW, CNOT, and CZ gates arising from the capacitive coupling between qubits. The method of optimization of quantum process tomography is proposed to provide a substantially higher degree of adequacy and fidelity compared to those attained by previously known methods. The examples of simulation of depolarizing quantum noise and amplitude- and phase-relaxation processes on the implementation of quantum operations in registers are considered.

Russian Microelectronics•Nov 1, 2012•5 citations

Creating, maintaining, and breaking of quantum entanglement in quantum operations

Yu. I. Bogdanov, Andrey Yu. Chernyavskiy, Alexander Semenovich Holevo +3 more

We study the evolution of entanglement in quantum gates in terms of Choi-Jamiolkowski relative states negativity. SQiSW (generated by XY-interaction), CNOT and CZ gates are considered in ideal case and under amplitude and phase relaxation. In addition, we consider an important task of analyzing entanglement of “pure” noise, which is obtained by deducting an ideal gate from a noisy one.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jan 8, 2013•1 citation

Development and simulation of the quantum microarchitecture operation using an optimization algorithm for a quantum calculation process

Viktor Potapov, S.M. Gushansky

The theory of quantum computing is being actively developed. Despite the fact that quantum computing device has some peculiarities, any task designed for a classical computer can be reproduced on a quantum system. The aim of the research is to develop a methodology for constructing models of quantum systems simulators using hardware simulators. The subject of this research is methods for constructing quantum computing devices and systems. In the course of the research, the system analysis methods and computer modeling, methods of object-oriented design were used. Modern high-level languages were used to solve the problems of constructing a modular quantum system with an open architecture. The work of a quantum microarchitecture using an algorithm for optimizing a quantum computational process has been developed and modeled. A universal methodology for modeling algorithms of a quantum nature using the hardware core and requirements for the mutual operation of software and hardware components for the efficient operation of a quantum system is derived.

The Herald of the Siberian State University of Telecommunications and Information Science•Dec 18, 2021•0 citations

Hybrid quantum neural network models for fruit quality assessment

Danish ul Khairi, Kamran Ahsan, Syed Zeeshan Ali +3 more

This study investigates hybrid quantum neural networks for fruit quality assessment, with a focus on the impact of the entangling gate choice. Two architectures were developed: NNQEv1, utilizing controlled-NOT (CNOT) gates, and NNQEv2, employing controlled-phase (CZ) gates. A theoretical justification is provided, based on gate decomposition and hardware-aware noise considerations, suggesting the CZ-based architecture is likely to be more stable. The performance of the models was evaluated through the computational execution of their quantum circuits on classical hardware and compared against classical and state-of-the-art deep learning models. The proposed models demonstrated competitive performance, achieving test accuracies of 98.7% on MNIST, 98.6% on the FruitQ dataset, and 96.7% on a custom, data-scarce Apple dataset. The experimental results align with the theoretical analysis: the CZ-based NNQEv2 model, when compared to the CNOT-based NNQEv1, consistently showed more stable training dynamics and yielded tighter confidence intervals in cross-validation. This work presents a foundational, computational study on the role of gate-level design choices, intended to inform the development of future quantum machine learning algorithms.

PLoS ONE•Dec 10, 2025•0 citations

PRINCIPLES OF OPERATION OF QUANTUM COMPUTING DEVICES

Saniyat M. Arvanova, Khalimat S. Talkhigova

The article is devoted to the consideration of the fundamental principles of op-eration of quantum computing devices. Particular attention is paid to the key concepts of quan-tum mechanics, including superposition, entanglement and measurement of states, as well as their application in computing processes. The main types of qubits, quantum logic gates, princi-ples of constructing algorithms and hardware platforms for implementing quantum computing are described. Current problems, such as decoherence and error correction, as well as the pro-spects for using quantum computers in science, cryptography and modeling of complex systems are discussed.

EKONOMIKA I UPRAVLENIE PROBLEMY RESHENIYA•Jan 1, 2024•1 citation

Noise-Aware Design of Quantum Counters Using Qiskit and IBM Quantum Processors

E Mahesh, K Raju

Quantum counters are crucial elements in the design of quantum sequential circuits and quantum control systems. This article details the design, implementation, and noise-aware benchmarking of large-scale quantum counter designs based on the Qiskit framework and IBM Quantum computing platforms. The quantum counter architectures introduced are 2-bit, 3-bit, 4-bit, and 5-bit quantum counters, which are developed using reversible quantum gates like Pauli-X, Controlled-NOT (CNOT), Toffoli, and Multi-Controlled X (MCX) gates. Firstly, all the counter architectures were confirmed to be working well in the ideal simulation scenario using the Qiskit Aer simulator, where they achieved perfect computational fidelity and produced correct counting sequences. For the assessment of practical performance in the Noisy Intermediate-Scale Quantum (NISQ) environment, several quantum noise models, including bit-flip noise, depolarizing noise, amplitude damping noise, and phase damping noise, were introduced within the experimental framework. The experimental findings indicate that as circuits become more complex, the precision of computations decreases in the presence of real-world noise conditions. Under bit-flip noise, the correct counts decreased from 846 for the 2-bit counter to 620 for the 5-bit counter. Likewise, depolarizing noise led to a slight decline, whereas amplitude damping noise resulted in the most drastic decrease in performance, dropping the correct counts from 253 in the 2-bit design to merely 33 in the 5-bit design. On the contrary, phase damping noise showed almost no impact and retained 1,024 correct counts across all architectures. The scalability analysis demonstrates that quantum counter architectures based on reversible gates can proficiently work over quite extensive qubit configurations while maintaining functional correctness. Nevertheless, the increase in circuit depth and gate complexity mainly results in susceptibility to decoherence and noise accumulation. This work offers a unified framework for the development and evaluation of large-scale quantum sequential circuits and sheds light on building quantum systems that can be used fault-tolerantly in future quantum computing implementations.

International Conference on Networks, Computers and Communications (ICNCCom)•Jul 1, 2026•0 citations
In the present paper methods and algorithms of modeling quantum operations for quantum computer integrated circuits design are developed. The results of modeling of practically important quantum gates: controlled-NOT (CNOT), and controlled Z-transform (CZ) subject to different decoherence mechanisms are presented. These mechanisms include analysis of depolarizing quantum noise and processes of amplitude and phase relaxation.
A general approach to the provision of the quality and efficiency of quantum information technologies is proposed. The approach is based on the analysis of quantum noise generated on the implementation of quantum operations. The method of precision quantum measurements of logic quantum gates based on superconducting phase qubits is developed. The universal method of quantum state and process tomography is used to carry out a comprehensive analysis of the fidelity of the tomography of two-qubit SQiSW, CNOT, and CZ gates arising from the capacitive coupling between qubits. The method of optimization of quantum process tomography is proposed to provide a substantially higher degree of adequacy and fidelity compared to those attained by previously known methods. The examples of simulation of depolarizing quantum noise and amplitude- and phase-relaxation processes on the implementation of quantum operations in registers are considered.
The theory of quantum computing is being actively developed. Despite the fact that quantum computing device has some peculiarities, any task designed for a classical computer can be reproduced on a quantum system. The aim of the research is to develop a methodology for constructing models of quantum systems simulators using hardware simulators. The subject of this research is methods for constructing quantum computing devices and systems. In the course of the research, the system analysis methods and computer modeling, methods of object-oriented design were used. Modern high-level languages were used to solve the problems of constructing a modular quantum system with an open architecture. The work of a quantum microarchitecture using an algorithm for optimizing a quantum computational process has been developed and modeled. A universal methodology for modeling algorithms of a quantum nature using the hardware core and requirements for the mutual operation of software and hardware components for the efficient operation of a quantum system is derived.
This study investigates hybrid quantum neural networks for fruit quality assessment, with a focus on the impact of the entangling gate choice. Two architectures were developed: NNQEv1, utilizing controlled-NOT (CNOT) gates, and NNQEv2, employing controlled-phase (CZ) gates. A theoretical justification is provided, based on gate decomposition and hardware-aware noise considerations, suggesting the CZ-based architecture is likely to be more stable. The performance of the models was evaluated through the computational execution of their quantum circuits on classical hardware and compared against classical and state-of-the-art deep learning models. The proposed models demonstrated competitive performance, achieving test accuracies of 98.7% on MNIST, 98.6% on the FruitQ dataset, and 96.7% on a custom, data-scarce Apple dataset. The experimental results align with the theoretical analysis: the CZ-based NNQEv2 model, when compared to the CNOT-based NNQEv1, consistently showed more stable training dynamics and yielded tighter confidence intervals in cross-validation. This work presents a foundational, computational study on the role of gate-level design choices, intended to inform the development of future quantum machine learning algorithms.
The article is devoted to the consideration of the fundamental principles of op-eration of quantum computing devices. Particular attention is paid to the key concepts of quan-tum mechanics, including superposition, entanglement and measurement of states, as well as their application in computing processes. The main types of qubits, quantum logic gates, princi-ples of constructing algorithms and hardware platforms for implementing quantum computing are described. Current problems, such as decoherence and error correction, as well as the pro-spects for using quantum computers in science, cryptography and modeling of complex systems are discussed.
Quantum counters are crucial elements in the design of quantum sequential circuits and quantum control systems. This article details the design, implementation, and noise-aware benchmarking of large-scale quantum counter designs based on the Qiskit framework and IBM Quantum computing platforms. The quantum counter architectures introduced are 2-bit, 3-bit, 4-bit, and 5-bit quantum counters, which are developed using reversible quantum gates like Pauli-X, Controlled-NOT (CNOT), Toffoli, and Multi-Controlled X (MCX) gates. Firstly, all the counter architectures were confirmed to be working well in the ideal simulation scenario using the Qiskit Aer simulator, where they achieved perfect computational fidelity and produced correct counting sequences. For the assessment of practical performance in the Noisy Intermediate-Scale Quantum (NISQ) environment, several quantum noise models, including bit-flip noise, depolarizing noise, amplitude damping noise, and phase damping noise, were introduced within the experimental framework. The experimental findings indicate that as circuits become more complex, the precision of computations decreases in the presence of real-world noise conditions. Under bit-flip noise, the correct counts decreased from 846 for the 2-bit counter to 620 for the 5-bit counter. Likewise, depolarizing noise led to a slight decline, whereas amplitude damping noise resulted in the most drastic decrease in performance, dropping the correct counts from 253 in the 2-bit design to merely 33 in the 5-bit design. On the contrary, phase damping noise showed almost no impact and retained 1,024 correct counts across all architectures. The scalability analysis demonstrates that quantum counter architectures based on reversible gates can proficiently work over quite extensive qubit configurations while maintaining functional correctness. Nevertheless, the increase in circuit depth and gate complexity mainly results in susceptibility to decoherence and noise accumulation. This work offers a unified framework for the development and evaluation of large-scale quantum sequential circuits and sheds light on building quantum systems that can be used fault-tolerantly in future quantum computing implementations.