Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Conference on Networks, Computers and Communications (ICNCCom)

Noise-Aware Design of Quantum Counters Using Qiskit and IBM Quantum Processors

E Mahesh, K Raju

Published Jul 1, 2026• 0 citations
Publisher

Abstract

Quantum counters are crucial elements in the design of quantum sequential circuits and quantum control systems. This article details the design, implementation, and noise-aware benchmarking of large-scale quantum counter designs based on the Qiskit framework and IBM Quantum computing platforms. The quantum counter architectures introduced are 2-bit, 3-bit, 4-bit, and 5-bit quantum counters, which are developed using reversible quantum gates like Pauli-X, Controlled-NOT (CNOT), Toffoli, and Multi-Controlled X (MCX) gates. Firstly, all the counter architectures were confirmed to be working well in the ideal simulation scenario using the Qiskit Aer simulator, where they achieved perfect computational fidelity and produced correct counting sequences. For the assessment of practical performance in the Noisy Intermediate-Scale Quantum (NISQ) environment, several quantum noise models, including bit-flip noise, depolarizing noise, amplitude damping noise, and phase damping noise, were introduced within the experimental framework. The experimental findings indicate that as circuits become more complex, the precision of computations decreases in the presence of real-world noise conditions. Under bit-flip noise, the correct counts decreased from 846 for the 2-bit counter to 620 for the 5-bit counter. Likewise, depolarizing noise led to a slight decline, whereas amplitude damping noise resulted in the most drastic decrease in performance, dropping the correct counts from 253 in the 2-bit design to merely 33 in the 5-bit design. On the contrary, phase damping noise showed almost no impact and retained 1,024 correct counts across all architectures. The scalability analysis demonstrates that quantum counter architectures based on reversible gates can proficiently work over quite extensive qubit configurations while maintaining functional correctness. Nevertheless, the increase in circuit depth and gate complexity mainly results in susceptibility to decoherence and noise accumulation. This work offers a unified framework for the development and evaluation of large-scale quantum sequential circuits and sheds light on building quantum systems that can be used fault-tolerantly in future quantum computing implementations.

DOI
10.1109/icnccom69117.2026.11736261

Related papers

Noise-Aware Design of Quantum Counters Using Qiskit and IBM Quantum Processors

E.Mahesh1 Dr. K.Raju2

Quantum counters are very crucial elements in the design of quantum sequential circuits and quantum control systems. This article details the design, implementation, and noise-aware benchmarking of large-scale quantum counter designs based on the Qiskit framework and IBM Quantum computing platforms. The quantum counter architectures introduced are 2-bit, 3-bit, 4-bit, and 5-bit quantum counters which are developed using reversible quantum gates like Pauli-X, Controlled-NOT (CNOT), Toffoli, and Multi-Controlled X (MCX) gates. Firstly, all the counter architectures were confirmed to be working well in the ideal simulation scenario using the Qiskit Aer simulator where they achieved perfect computational fidelity and produced correct counting sequences. For the assessment of practical performance in the Noisy Intermediate-Scale Quantum (NISQ) environment, several quantum noise models, including bit-flip noise, depolarizing noise, amplitude damping noise, and phase damping noise, were introduced within the experimental framework. The experimental findings indicate that as circuits become more complex, the precision of computations decreases in the presence of real-world noise conditions. Under bit-flip noise, the correct counts noted changed from 846 for the 2-bit counter to 620 for the 5-bit counter. Likewise, depolarizing noise led to a slight decline, whereas amplitude damping noise resulted in the most drastic decrease in performance, dropping the correct counts from 253 in the 2-bit design to merely 33 in the 5-bit design. On the contrary, a phase damping noise showed almost no impact and retained 1024 correct counts across all architectures. The scalability analysis demonstrates that quantum counter architectures based on reversible gates can proficiently work over quite extensive qubit configurations while maintaining functional correctness. Nevertheless, the increase in circuit depth and gate complexity mainly results in susceptibility to decoherence and noise accumulation. This work offers a unified framework for the development and evaluation of large-scale quantum sequential circuits and sheds light on building quantum systems that can be used fault-tolerantly in future quantum computing implementations.

International Journal of Engineering Research and Science & Technology•Jun 20, 2026•0 citations

Quantum Algorithm Performance Under Noise: A Qiskit Aer Simulation Study and IBM Quantum Hardware Comparative Analysis

Yuvraj Mehta

This study examines how noise affects the reliability of quantum circuits through two complementary approaches: a controlled simulation using Qiskit Aer and an execution study on real IBM Quantum hardware. In simulation, five noise models (bit-flip, phase-flip, depolarizing, readout, and thermal-relaxation) were applied to a parameterized benchmark circuit across varying qubit counts, circuit depths, and noise strengths, producing 6,000 experimental observations. Success probability declined substantially as qubit count and circuit depth increased, with bit-flip, phase-flip, and depolarizing noise degrading performance far more severely (mean success probabilities of 0.597, 0.580, and 0.607) than readout noise (0.917) or thermal-relaxation noise (0.982). The same benchmark circuit was then executed on the ibm_marrakesh processor across 150 hardware runs (150,000 shots). Hardware performance remained consistently high (mean success probability 0.992), declining with qubit count (0.998 at two qubits to 0.986 at six) but showing little sensitivity to circuit depth. These results indicate that controlled noise mechanisms and real hardware degrade circuit performance through different dynamics, with implications for interpreting simulated noise models relative to physical device behavior.

•Oct 4, 2026•0 citations

Practical Guide to Quantum Computing: Building Noise Models with IBM Quantum Simulators # 4

Mikhail Pavlov

Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.

•Mar 4, 2026•0 citations

Noise-Resilient and Reduced Depth Approximate Adders for NISQ Quantum Computing

Bhaskar Gaur, Travis S. Humble, Himanshu Thapliyal

The "Noisy intermediate-scale quantum" NISQ machine era primarily focuses on mitigating noise, controlling errors, and executing high-fidelity operations, hence requiring shallow circuit depth and noise robustness. Approximate computing is a novel computing paradigm that produces imprecise results by relaxing the need for fully precise output for error-tolerant applications including multimedia, data mining, and image processing. We investigate how approximate computing can improve the noise resilience of quantum adder circuits in NISQ quantum computing. We propose five designs of approximate quantum adders to reduce depth while making them noise-resilient, in which three designs are with carryout, while two are without carryout. We have used novel design approaches that include approximating the Sum only from the inputs (pass-through designs) and having zero depth, as they need no quantum gates. The second design style uses a single CNOT gate to approximate the SUM with a constant depth of O(1). We performed our experimentation on IBM Qiskit on noise models including thermal, depolarizing, amplitude damping, phase damping, and bitflip: (i) Compared to exact quantum ripple carry adder without carryout the proposed approximate adders without carryout have improved fidelity ranging from 8.34% to 219.22%, and (ii) Compared to exact quantum ripple carry adder with carryout the proposed approximate adders with carryout have improved fidelity ranging from 8.23% to 371%. Further, the proposed approximate quantum adders are evaluated in terms of various error metrics.

arXiv:2408.00927•ACM Great Lakes Symposium on VLSI (GLSVLSI)•May 31, 2023•11 citations

Design and Optimization of Complex Quantum Circuits Targeting Near-Term Quantum Processors Using Custom Algorithms and Qiskit Transpiler

Kazi Redwan, Mustakim Ahmed, Md. Faruk Abdullah Al Sohan +5 more

Quantum computing faces challenges such as noise, short coherence time, and limited qubit connections. These challenges worsen as quantum circuits become more complex. One major issue is the increasing depth of quantum circuits. This research proposes an optimization framework targeting depth and gate count reduction in quantum circuits, specifically for Noisy Intermediate-Scale Quantum (NISQ) devices. The proposed approach combines unitary merging of single-qubit gates, CNOT cancellation, gate commuting, and rotation gate rewriting strategies. Consecutive gates acting on the same qubit, such as$R_{x}\left(\theta_{1}\right) \cdot R_{x}\left(\theta_{2}\right)$, are algebraically merged into a single rotation, while pairs of redundant CNOT gates are eliminated based on gate identity relations. The technique is implemented using Qiskit and validated across five diverse circuits including complex, random, and multi-qubit configurations. Experimental results show an average depth reduction of 33.33% and gate count reduction of 32.14%, with runtime improvement of up to 25%. For instance, an input circuit with a depth of 7 and gate count of 11 was reduced to a depth of 2 and 4 gates. All optimized circuits preserve functional correctness with a fidelity$F \geq 0.99$. High-resolution circuit diagrams are presented to visually demonstrate improvements before and after optimization. Additionally, global phase shifts such as$e^{i \pi / 4}$are preserved or analytically characterized where relevant. This work enhances the viability of quantum computations on near-term hardware and opens pathways for future AI-driven quantum optimizations.

IEEE Region 10 Conference (TENCON)•Oct 27, 2025•0 citations

Design and Evaluation of Low-Depth Approximate Quantum Computing

Taegyun Kim, Jungu Kang, Yeongkyo Seo

Approximate quantum adders are gaining traction in NISQ-era computing for their potential to reduce quantum resource usage while preserving computational accuracy. In this work, we evaluate two 8-qubit hybrid approximate quantum adders that combine a 2-qubit approximate block, either a pass-through Copy Adder or a CNOT-based design, with a 6-qubit Cuccaro ripple-carry adder. Simulations are conducted using IBM's Qiskit framework under realistic noise models, including bit-flip, depolarizing, and thermal noise. Compared to the exact 8-bit Cuccaro adder, our designs reduce quantum cost and circuit depth by over 20 percent and achieve up to 79.3 percent higher output probability under noisy conditions. These results highlight the robustness and efficiency of approximate logic in noisy quantum environments and confirm its practicality for near-term quantum hardware.

International SoC Design Conference•Oct 15, 2025•0 citations
Quantum counters are crucial elements in the design of quantum sequential circuits and quantum control systems. This article details the design, implementation, and noise-aware benchmarking of large-scale quantum counter designs based on the Qiskit framework and IBM Quantum computing platforms. The quantum counter architectures introduced are 2-bit, 3-bit, 4-bit, and 5-bit quantum counters, which are developed using reversible quantum gates like Pauli-X, Controlled-NOT (CNOT), Toffoli, and Multi-Controlled X (MCX) gates. Firstly, all the counter architectures were confirmed to be working well in the ideal simulation scenario using the Qiskit Aer simulator, where they achieved perfect computational fidelity and produced correct counting sequences. For the assessment of practical performance in the Noisy Intermediate-Scale Quantum (NISQ) environment, several quantum noise models, including bit-flip noise, depolarizing noise, amplitude damping noise, and phase damping noise, were introduced within the experimental framework. The experimental findings indicate that as circuits become more complex, the precision of computations decreases in the presence of real-world noise conditions. Under bit-flip noise, the correct counts decreased from 846 for the 2-bit counter to 620 for the 5-bit counter. Likewise, depolarizing noise led to a slight decline, whereas amplitude damping noise resulted in the most drastic decrease in performance, dropping the correct counts from 253 in the 2-bit design to merely 33 in the 5-bit design. On the contrary, phase damping noise showed almost no impact and retained 1,024 correct counts across all architectures. The scalability analysis demonstrates that quantum counter architectures based on reversible gates can proficiently work over quite extensive qubit configurations while maintaining functional correctness. Nevertheless, the increase in circuit depth and gate complexity mainly results in susceptibility to decoherence and noise accumulation. This work offers a unified framework for the development and evaluation of large-scale quantum sequential circuits and sheds light on building quantum systems that can be used fault-tolerantly in future quantum computing implementations.
Quantum counters are very crucial elements in the design of quantum sequential circuits and quantum control systems. This article details the design, implementation, and noise-aware benchmarking of large-scale quantum counter designs based on the Qiskit framework and IBM Quantum computing platforms. The quantum counter architectures introduced are 2-bit, 3-bit, 4-bit, and 5-bit quantum counters which are developed using reversible quantum gates like Pauli-X, Controlled-NOT (CNOT), Toffoli, and Multi-Controlled X (MCX) gates. Firstly, all the counter architectures were confirmed to be working well in the ideal simulation scenario using the Qiskit Aer simulator where they achieved perfect computational fidelity and produced correct counting sequences. For the assessment of practical performance in the Noisy Intermediate-Scale Quantum (NISQ) environment, several quantum noise models, including bit-flip noise, depolarizing noise, amplitude damping noise, and phase damping noise, were introduced within the experimental framework. The experimental findings indicate that as circuits become more complex, the precision of computations decreases in the presence of real-world noise conditions. Under bit-flip noise, the correct counts noted changed from 846 for the 2-bit counter to 620 for the 5-bit counter. Likewise, depolarizing noise led to a slight decline, whereas amplitude damping noise resulted in the most drastic decrease in performance, dropping the correct counts from 253 in the 2-bit design to merely 33 in the 5-bit design. On the contrary, a phase damping noise showed almost no impact and retained 1024 correct counts across all architectures. The scalability analysis demonstrates that quantum counter architectures based on reversible gates can proficiently work over quite extensive qubit configurations while maintaining functional correctness. Nevertheless, the increase in circuit depth and gate complexity mainly results in susceptibility to decoherence and noise accumulation. This work offers a unified framework for the development and evaluation of large-scale quantum sequential circuits and sheds light on building quantum systems that can be used fault-tolerantly in future quantum computing implementations.
This study examines how noise affects the reliability of quantum circuits through two complementary approaches: a controlled simulation using Qiskit Aer and an execution study on real IBM Quantum hardware. In simulation, five noise models (bit-flip, phase-flip, depolarizing, readout, and thermal-relaxation) were applied to a parameterized benchmark circuit across varying qubit counts, circuit depths, and noise strengths, producing 6,000 experimental observations. Success probability declined substantially as qubit count and circuit depth increased, with bit-flip, phase-flip, and depolarizing noise degrading performance far more severely (mean success probabilities of 0.597, 0.580, and 0.607) than readout noise (0.917) or thermal-relaxation noise (0.982). The same benchmark circuit was then executed on the ibm_marrakesh processor across 150 hardware runs (150,000 shots). Hardware performance remained consistently high (mean success probability 0.992), declining with qubit count (0.998 at two qubits to 0.986 at six) but showing little sensitivity to circuit depth. These results indicate that controlled noise mechanisms and real hardware degrade circuit performance through different dynamics, with implications for interpreting simulated noise models relative to physical device behavior.
Abstract This practical guide presents methods for constructing noise models using the Qiskit Aer noise module within the IBM Q ecosystem. The objective is to simulate quantum circuits under realistic error conditions, enabling accurate emulation of noisy quantum processors. The guide demonstrates how to: Use the Qiskit Aer noise module to define custom noise models. Incorporate gate errors, readout errors, and decoherence effects into simulations. Apply noise channels (e.g., depolarizing, amplitude damping, phase damping). Attach noise models to quantum circuit simulations. Analyze how noise affects algorithm performance and output distributions. Building noise models is essential for studying the behavior of quantum algorithms in the NISQ (Noisy Intermediate-Scale Quantum) era. It allows researchers to evaluate algorithm robustness, optimize circuit depth, and test error mitigation strategies before execution on real IBM Quantum hardware. This approach provides a bridge between ideal theoretical circuits and physically realistic quantum devices, enhancing the reliability and applicability of quantum computing experiments.
The "Noisy intermediate-scale quantum" NISQ machine era primarily focuses on mitigating noise, controlling errors, and executing high-fidelity operations, hence requiring shallow circuit depth and noise robustness. Approximate computing is a novel computing paradigm that produces imprecise results by relaxing the need for fully precise output for error-tolerant applications including multimedia, data mining, and image processing. We investigate how approximate computing can improve the noise resilience of quantum adder circuits in NISQ quantum computing. We propose five designs of approximate quantum adders to reduce depth while making them noise-resilient, in which three designs are with carryout, while two are without carryout. We have used novel design approaches that include approximating the Sum only from the inputs (pass-through designs) and having zero depth, as they need no quantum gates. The second design style uses a single CNOT gate to approximate the SUM with a constant depth of O(1). We performed our experimentation on IBM Qiskit on noise models including thermal, depolarizing, amplitude damping, phase damping, and bitflip: (i) Compared to exact quantum ripple carry adder without carryout the proposed approximate adders without carryout have improved fidelity ranging from 8.34% to 219.22%, and (ii) Compared to exact quantum ripple carry adder with carryout the proposed approximate adders with carryout have improved fidelity ranging from 8.23% to 371%. Further, the proposed approximate quantum adders are evaluated in terms of various error metrics.
Quantum computing faces challenges such as noise, short coherence time, and limited qubit connections. These challenges worsen as quantum circuits become more complex. One major issue is the increasing depth of quantum circuits. This research proposes an optimization framework targeting depth and gate count reduction in quantum circuits, specifically for Noisy Intermediate-Scale Quantum (NISQ) devices. The proposed approach combines unitary merging of single-qubit gates, CNOT cancellation, gate commuting, and rotation gate rewriting strategies. Consecutive gates acting on the same qubit, such asRx(θ1)⋅Rx(θ2)R_{x}\left(\theta_{1}\right) \cdot R_{x}\left(\theta_{2}\right)Rx​(θ1​)⋅Rx​(θ2​), are algebraically merged into a single rotation, while pairs of redundant CNOT gates are eliminated based on gate identity relations. The technique is implemented using Qiskit and validated across five diverse circuits including complex, random, and multi-qubit configurations. Experimental results show an average depth reduction of 33.33% and gate count reduction of 32.14%, with runtime improvement of up to 25%. For instance, an input circuit with a depth of 7 and gate count of 11 was reduced to a depth of 2 and 4 gates. All optimized circuits preserve functional correctness with a fidelityF≥0.99F \geq 0.99F≥0.99. High-resolution circuit diagrams are presented to visually demonstrate improvements before and after optimization. Additionally, global phase shifts such aseiπ/4e^{i \pi / 4}eiπ/4are preserved or analytically characterized where relevant. This work enhances the viability of quantum computations on near-term hardware and opens pathways for future AI-driven quantum optimizations.
Approximate quantum adders are gaining traction in NISQ-era computing for their potential to reduce quantum resource usage while preserving computational accuracy. In this work, we evaluate two 8-qubit hybrid approximate quantum adders that combine a 2-qubit approximate block, either a pass-through Copy Adder or a CNOT-based design, with a 6-qubit Cuccaro ripple-carry adder. Simulations are conducted using IBM's Qiskit framework under realistic noise models, including bit-flip, depolarizing, and thermal noise. Compared to the exact 8-bit Cuccaro adder, our designs reduce quantum cost and circuit depth by over 20 percent and achieve up to 79.3 percent higher output probability under noisy conditions. These results highlight the robustness and efficiency of approximate logic in noisy quantum environments and confirm its practicality for near-term quantum hardware.