Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1206.2964 · Physical Review Letters

Microwave Characterization of Josephson Junction Arrays: Implementing a Low Loss Superinductance

Nicholas A. Masluk, Ioan M. Pop, Archana Kamal, Zlatko Minev, Michel Devoret

Published Sep 27, 2012• 247 citations
arXivHTMLPDF

Abstract

We have measured the plasma resonances of an array of Josephson junctions in the regime E(J)>>E(C), up to the ninth harmonic by incorporating it as part of a resonator capacitively coupled to a coplanar waveguide. From the characteristics of the resonances, we infer the successful implementation of a superinductance, an electrical element with a nondissipative impedance greater than the resistance quantum [R(Q)=h/(2e)(2) is approximately equal to 6.5 kΩ] at microwave frequencies. Such an element is crucial for preserving the quantum coherence in circuits exploiting large fluctuations of the superconducting phase. Our results show internal losses less than 20 ppm, self-resonant frequencies greater than 10 GHz, and phase-slip rates less than 1 mHz, enabling direct application of such arrays for quantum information and metrology. Arrays with a loop geometry also demonstrate a new manifestation of flux quantization in a dispersive analog of the Little-Parks effect.

DOI
10.1103/physrevlett.109.137002

Related papers

Hybrid superinductance with Al/InAs

Junseok Oh, Ido Levy, Tyler Cowan +4 more

We report microwave spectroscopy of Josephson junctions chains made from an epitaxial Al/InAs heterostructure. The chains exhibit superinductance, with characteristic wave impedance exceeding $R_{Q} = \hbar/(2e)^{2}$. The planar nature of the junctions results in a large plasma frequency, with no measurable deviations from ideal dispersion up to $12~\mathrm{GHz}$. Internal quality factors decrease sharply with frequency, which we describe with a simple loss model. The possibility of a loss mechanism intrinsic to the superconductor-semiconductor junction is considered.

cond-mat.mes-hallCross-listedarXiv:2601.10023•Applied Physics Letters•Jan 16, 2026•0 citations

Applications of superinductors in superconducting quantum circuits

Wenyuan Zhang

Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, $R_{Q}=h/(2e)^{2}approx6.5kOmega$. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to $e$ mod(2$e$). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.

•Jan 1, 2019•1 citation

Hyperinductance based on stacked Josephson junctions

Paul Manset, José M. Palomo, A. Schmitt +9 more

Superinductances are superconducting circuit elements that combine a large inductance with a low parasitic capacitance to ground, resulting in a characteristic impedance exceeding the resistance quantum $R_Q = h/(2e)^2 \simeq 6.45 \mathrm{k}Ω$. In recent years, these components have become key enablers for emerging quantum circuit architectures. However, achieving high characteristic impedance while maintaining scalability and fabrication robustness remains a major challenge. In this work, we present two fabrication techniques for realizing superinductances based on vertically stacked Josephson junctions. Using a multi-angle Manhattan (MAM) process and a zero-angle (ZA) evaporation technique -- in which junction stacks are connected pairwise using airbridges -- we fabricate one-dimensional chains of stacks that act as high-impedance superconducting transmission lines. Two-tone microwave spectroscopy reveals the expected $\sqrt{n}$ scaling of the impedance with the number of junctions per stack. The chain fabricated using the ZA process, with nine junctions per stack, achieves a characteristic impedance of $\sim 16 \mathrm{k}Ω$, a total inductance of $5.9 \mathrm{μH}$, and a maximum frequency-dependent impedance of $50 \mathrm{k}Ω$ at 1.4 GHz. Our results establish junction stacking as a scalable, robust, and flexible platform for next-generation quantum circuits requiring ultra-high impedance environments.

arXiv:2505.02764•Physical Review Applied•Apr 14, 2026•3 citations

Microwave coupling of frequency-locked Josephson junction arrays

Insang Song, Yongheum Eom, Gwangseo Park +2 more

A high temperature superconducting YBa2Cu3Oy array of five Josephson junctions designed with additional coupling lines has been developed to demonstrate the effects of frequency locking and impedance matching for applications such as oscillators, mixers, and detectors. The Josephson self-radiation power was directly detected by a superheterodyne receiver, and Shapiro steps were also measured. The Josephson self-radiation properties reveal good quality of phase locking and microwave coupling with external circuits. The maximum self-radiation power of our array is about 50 pW which is several ten times higher than that of a single Josephson junction, and its peak point exactly satisfies the Josephson current-voltage relation. The Shapiro-step measurements show that the behavior of current-voltage curve depends on the effective inductance of coupling lines which affects the total impedance of Josephson junction array and microwave coupling. The Josephson oscillation frequency was obtained up to about 880 GHz which is 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions. Experimental results show that this type of Josephson junction array can improve the Josephson self-radiation power and increase the maximum detectable frequency.

Applied Physics Letters•Jun 16, 1997•8 citations

Superinductance and fluctuating two-level systems: Loss and noise in disordered and non-disordered superconducting quantum devices

David Niepce

In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.

•Jan 1, 2020•2 citations

Josephson Junctions: Oscillators and Broadband Spectrometers at Frequencies up to 1 THz

J. Edstam

This thesis is devoted to some selected applications of the Josephson junction oscillator. The initial work was performed using low-Tc Nb/PbBi tunnel junctions, while the later parts were done using the recently developed high-Tc YBa2Cu3O7 (YBCO) Josephson junctions. The latter junctions have raised the hope for Josephson oscillator applications with substantially increased operation frequencies and temperatures. In the first part of this thesis the use of inductor-resistor (LR) shunted tunnel junctions in arrays of phase locked Josephson junction oscillators was investigated. The LR shunt is designed to resonate out the intrinsic tunnel junction capacitance at the operation frequency. We show that LR shunted tunnel junctions have important advantages compared to the commonly used resistively shunted tunnel junctions; i.e. narrower linewidths, higher impedance of the junctions and that they can be optimized also at frequencies higher than about 100 GHz. Design rules for stable, non-chaotic oscillations with optimized output power were developed. Measurements on a non- optimized circuit show that oscillator arrays of LR shunted tunnel junctions can generate substantial power, ~10 nW to a 300 .OMEGA. load at 390 GHz from a 10 junction array. In the second part the phase locking of YBCO Josephson junctions was clearly demonstrated for the first time. Mutual phase locking of two junctions was observed at frequencies between 0.2 and 1 THz, and was only limited by the bandwidth of the coupling circuit. The locking was in good agreement with simulations based on the resistively shunted junction model. The interaction of a single Josephson junction with a 5 junction oscillator array was also measured at frequencies up to about 350 GHz, but was substantially reduced by the high losses of the coupling circuit. The YBCO Josephson junctions were found to be interesting candidates for microwave generation at frequencies approaching 1 THz and oscillator arrays to be mainly limited by the high losses of the coupling circuits at these frequencies. In the third part the interaction of YBCO Josephson junctions with integrated resonators were studied for the first time. Using a novel method, Josephson Broadband Spectroscopy (JOBS), the high frequency properties of the resonators were measured with a bandwidth of up to 1 THz and in the temperature range 4-77 K. The YBCO surface resistance (9 m.OMEGA. at 4 K and 100 GHz) was found to scale as f2 and had a temperature dependence in good agreement with the two-fluid model, modified with 18% non-pairing charge carriers. The YBCO London penetration depth was frequency independent (460 nm at 4 K) and had a temperature dependence in agreement with the two-fluid model.

•Jan 1, 1994•0 citations
We have measured the plasma resonances of an array of Josephson junctions in the regime E(J)>>E(C), up to the ninth harmonic by incorporating it as part of a resonator capacitively coupled to a coplanar waveguide. From the characteristics of the resonances, we infer the successful implementation of a superinductance, an electrical element with a nondissipative impedance greater than the resistance quantum [R(Q)=h/(2e)(2) is approximately equal to 6.5 kΩ] at microwave frequencies. Such an element is crucial for preserving the quantum coherence in circuits exploiting large fluctuations of the superconducting phase. Our results show internal losses less than 20 ppm, self-resonant frequencies greater than 10 GHz, and phase-slip rates less than 1 mHz, enabling direct application of such arrays for quantum information and metrology. Arrays with a loop geometry also demonstrate a new manifestation of flux quantization in a dispersive analog of the Little-Parks effect.
We report microwave spectroscopy of Josephson junctions chains made from an epitaxial Al/InAs heterostructure. The chains exhibit superinductance, with characteristic wave impedance exceeding RQ=ℏ/(2e)2R_{Q} = \hbar/(2e)^{2}RQ​=ℏ/(2e)2. The planar nature of the junctions results in a large plasma frequency, with no measurable deviations from ideal dispersion up to 12 GHz12~\mathrm{GHz}12 GHz. Internal quality factors decrease sharply with frequency, which we describe with a simple loss model. The possibility of a loss mechanism intrinsic to the superconductor-semiconductor junction is considered.
Superinductors are inductors whose microwave characteristic impedances are greater than the resistance quantum, RQ=h/(2e)2approx6.5kOmegaR_{Q}=h/(2e)^{2}approx6.5kOmegaRQ​=h/(2e)2approx6.5kOmega. They can be implemented using Josephson junction chains and high kinetic inductance nanowires. In this dissertation, we explore applications of superinductors in both implementations in superconducting quantum circuits. The dissertation consists of three parts. In the first part, we discuss the fluxon-parity-protected qubit consisting of a Cooper-pair box (CPB) shunted by a superinductor made of a chain of coupled asymmetric Superconducting Quantum Interference Devices (CASQUIDs). The spectroscopic measurement of a prototype of the fluxon-parity-protected qubit was performed. We observed almost complete suppression of the single fluxon tunneling across the CPB due to the destructive Aharonov-Casher interference when the offset charge on the CPB island was set to eee mod(2eee). A fluxon-parity-protected qubit with a higher superinductance can potentially be used to perform fault-tolerant Clifford gates. In the second part, we studied the microwave losses in high-kinetic-inductance granular Aluminum films using superconducting coplanar-waveguide (CPW) resonators made of the films. We observed that the intrinsic losses in these resonators at low temperatures were limited by resonator coupling to the two-level systems (TLS) in the environment. The demonstrated internal quality factors are comparable with those for CPW resonators made of conventional superconductors. The characterized granular Aluminum films can be used to fabricate superinductors for a wide range of applications in quantum metrology and quantum information processing. In the third part, we discuss the one-dimensional Josephson metamaterial made of a similar structure as the superinductor used in the fluxon-parity-protected qubit. The metamaterial demonstrated strong Kerr nonlinearity with the Kerr constant tunable over a wide range from positive to negative values by the magnetic field. The metamaterial is promising for use as an active medium for quantum-limited Josephson traveling-wave parametric amplifiers.
Superinductances are superconducting circuit elements that combine a large inductance with a low parasitic capacitance to ground, resulting in a characteristic impedance exceeding the resistance quantum RQ=h/(2e)2≃6.45kΩR_Q = h/(2e)^2 \simeq 6.45 \mathrm{k}ΩRQ​=h/(2e)2≃6.45kΩ. In recent years, these components have become key enablers for emerging quantum circuit architectures. However, achieving high characteristic impedance while maintaining scalability and fabrication robustness remains a major challenge. In this work, we present two fabrication techniques for realizing superinductances based on vertically stacked Josephson junctions. Using a multi-angle Manhattan (MAM) process and a zero-angle (ZA) evaporation technique -- in which junction stacks are connected pairwise using airbridges -- we fabricate one-dimensional chains of stacks that act as high-impedance superconducting transmission lines. Two-tone microwave spectroscopy reveals the expected n\sqrt{n}n​ scaling of the impedance with the number of junctions per stack. The chain fabricated using the ZA process, with nine junctions per stack, achieves a characteristic impedance of ∼16kΩ\sim 16 \mathrm{k}Ω∼16kΩ, a total inductance of 5.9μH5.9 \mathrm{μH}5.9μH, and a maximum frequency-dependent impedance of 50kΩ50 \mathrm{k}Ω50kΩ at 1.4 GHz. Our results establish junction stacking as a scalable, robust, and flexible platform for next-generation quantum circuits requiring ultra-high impedance environments.
A high temperature superconducting YBa2Cu3Oy array of five Josephson junctions designed with additional coupling lines has been developed to demonstrate the effects of frequency locking and impedance matching for applications such as oscillators, mixers, and detectors. The Josephson self-radiation power was directly detected by a superheterodyne receiver, and Shapiro steps were also measured. The Josephson self-radiation properties reveal good quality of phase locking and microwave coupling with external circuits. The maximum self-radiation power of our array is about 50 pW which is several ten times higher than that of a single Josephson junction, and its peak point exactly satisfies the Josephson current-voltage relation. The Shapiro-step measurements show that the behavior of current-voltage curve depends on the effective inductance of coupling lines which affects the total impedance of Josephson junction array and microwave coupling. The Josephson oscillation frequency was obtained up to about 880 GHz which is 73% of the maximum available frequency calculated from the characteristic voltage of the Josephson junctions. Experimental results show that this type of Josephson junction array can improve the Josephson self-radiation power and increase the maximum detectable frequency.
In this thesis, we first demonstrate that a disordered superconductor with high kinetic inductance can realise a microwave low-loss, non-dissipative circuit element with impedance greater than the quantum resistance. This element, known as a superinductor, can suppress the fluctuations of charge in a quantum circuit.For this purpose, we fabricated and characterised 20 nm thick, 40 nm wide niobium-nitride nanowires and determined the impedance to 6.795 kΩ. We demonstrate internal quality factors Qi = 2.5e4 in nanowire resonators at single photon excitation, which is significantly higher than values reported in devices with similar materials and geometries. Moreover, we show that the dominant dissipation in our nanowires is not an intrinsic property of the disordered films, but can instead be fully understood within the framework of two-level systems.To further characterise these losses, we then explore the geometrical scaling, toward nanowire dimensions, of dielectric losses in superconducting microwave resonators fabricated with the same techniques and from the same NbN thin-film as the nanowire superinductors. For this purpose, we perform an experimental and numerical study of dielectric loss at low temperatures. Using 3D finite-element simulation of the Maxwell--London equations, we compute the geometric filling factors of the lossy regions in our resonator structures and fit the experimental data to determine the intrinsic loss tangents of its interfaces and dielectrics. Finally, we study the effect of two-level systems on the performance of various superconducting quantum circuits. For this purpose, we measure coherence-time fluctuations in qubits and frequency fluctuations in resonators. In all devices, through statistical analysis, we identify the signature of individual Lorentzian fluctuators in the noise. We find that fluctuations in qubit relaxation are local to the qubit and are caused by instabilities of near-resonant two-level-systems. Furthermore, when examining the low-frequency noise of three different types of superconducting resonator - one NbN nanowire, one Al coplanar waveguide, and one Al 3D cavity - we observe a similar power-law dependence of the Lorentzian switching time and amplitude on the circulating power in the resonators, suggesting a common noise mechanism in the three different types of devices.
This thesis is devoted to some selected applications of the Josephson junction oscillator. The initial work was performed using low-Tc Nb/PbBi tunnel junctions, while the later parts were done using the recently developed high-Tc YBa2Cu3O7 (YBCO) Josephson junctions. The latter junctions have raised the hope for Josephson oscillator applications with substantially increased operation frequencies and temperatures. In the first part of this thesis the use of inductor-resistor (LR) shunted tunnel junctions in arrays of phase locked Josephson junction oscillators was investigated. The LR shunt is designed to resonate out the intrinsic tunnel junction capacitance at the operation frequency. We show that LR shunted tunnel junctions have important advantages compared to the commonly used resistively shunted tunnel junctions; i.e. narrower linewidths, higher impedance of the junctions and that they can be optimized also at frequencies higher than about 100 GHz. Design rules for stable, non-chaotic oscillations with optimized output power were developed. Measurements on a non- optimized circuit show that oscillator arrays of LR shunted tunnel junctions can generate substantial power, ~10 nW to a 300 .OMEGA. load at 390 GHz from a 10 junction array. In the second part the phase locking of YBCO Josephson junctions was clearly demonstrated for the first time. Mutual phase locking of two junctions was observed at frequencies between 0.2 and 1 THz, and was only limited by the bandwidth of the coupling circuit. The locking was in good agreement with simulations based on the resistively shunted junction model. The interaction of a single Josephson junction with a 5 junction oscillator array was also measured at frequencies up to about 350 GHz, but was substantially reduced by the high losses of the coupling circuit. The YBCO Josephson junctions were found to be interesting candidates for microwave generation at frequencies approaching 1 THz and oscillator arrays to be mainly limited by the high losses of the coupling circuits at these frequencies. In the third part the interaction of YBCO Josephson junctions with integrated resonators were studied for the first time. Using a novel method, Josephson Broadband Spectroscopy (JOBS), the high frequency properties of the resonators were measured with a bandwidth of up to 1 THz and in the temperature range 4-77 K. The YBCO surface resistance (9 m.OMEGA. at 4 K and 100 GHz) was found to scale as f2 and had a temperature dependence in good agreement with the two-fluid model, modified with 18% non-pairing charge carriers. The YBCO London penetration depth was frequency independent (460 nm at 4 K) and had a temperature dependence in agreement with the two-fluid model.