Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1107.4082 · Applied Physics B

Thick-film technology for ultra high vacuum interfaces of micro-structured traps

Delia Kaufmann, Thomas Collath, M. Tanveer Baig, P. Kaufmann, E. Asenwar, M. Johanning, C. Wunderlich

Published Mar 20, 2012• 19 citations
arXivHTMLPDF
DOI
10.1007/s00340-012-4951-7

Related papers

Controlling the Surface Roughness of Surface-Electrode Ion Trap Based on Micro-Nano Fabrication

YunLei Hou, Xinfang Zhang, Wei Wu +3 more

The surface-electrode ion trap is one of the most promising devices to realize large-scale and integrated quantum information processing. However, a series of problems are faced in the micro-nano fabrication of surface-electrode ion traps. A prominent one is the difficulty to control the thick film surface roughness. A rough electrode surface could produce excessive radio frequency (RF) loss and deteriorate trapping ability of the surface-electrode ion trap. In this paper, a thick film micro-nano fabrication technology to control the surface roughness is presented, which can reduce the roughness of thick film surface-electrode down to 6.2 nm, while being controllable between 6.2 nm and 45 nm. Therefore, it can also provide a basis for studying the influence of electrode surface roughness on trap performance. The micro-nano fabrication technology is not only suitable for surface-electrode ion traps with various configurations, but also be further applied to researches of MEMS, solar cells and surface science.

Coatings•Mar 31, 2021•8 citations

High-fidelity operations in microfabricated surface ion traps

Peter Maunz

Bulletin of the American Physical Society•Jun 8, 2017•0 citations

Laser cooling in a chip-scale platform

J. P. McGilligan, K. R. Moore, A. Dellis +7 more

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.

arXiv:2005.05818•Applied Physics Letters•Aug 3, 2020•63 citations

High temperature superconducting surface ion traps

Kirill Lakhmanskiy, Philip C. Holz, Dominic Schärtl +3 more

Bulletin of the American Physical Society•Jun 8, 2017•0 citations

Advanced Technologies for Ion Trap Systems

Jonathan David Sterk

•Sep 1, 2023•0 citations

Nanometer-thick molecular beam epitaxy Al films capped with in situ deposited Al2O3—High-crystallinity, morphology, and superconductivity

Y.H. Lin, C. K. Cheng, L. B. Young +11 more

Achieving high material perfection in aluminum (Al) films and their associated Al/AlOx heterostructures is essential for enhancing the coherence time in superconducting quantum circuits. We grew Al films with thicknesses ranging from 3 to 30 nanometers (nm) epitaxially on sapphire substrates using molecular beam epitaxy (MBE). An integral aspect of our work involved electron-beam (e-beam) evaporation to directly deposit aluminum oxide (Al2O3) films on the freshly grown ultrathin epitaxial Al films in an ultra-high-vacuum (UHV) environment. This in situ oxide deposition is critical for preventing the oxidation of parts of the Al films, avoiding the formation of undesired native oxides, and thereby preserving the nm-thick Al films in their pristine conditions. The thicknesses of our Al films in the study were accurately determined; for example, coherence lengths of 3.0 and 20.2 nm were measured in the nominal 3.0 and 20 nm thick Al films, respectively. These Al films were epitaxially grown on sapphire substrates, showing an orientational relationship, denoted as Al(111)⟨21¯1¯⟩∥sapphire(0001)[21¯1¯0]. The Al/sapphire interface was atomically ordered without any interfacial layers, as confirmed by in situ reflection high-energy electron diffraction (RHEED) and cross-sectional scanning transmission electron microscopy (STEM). All sample surfaces exhibited smoothness with a roughness in the range of 0.1–0.2 nm. The Al films are superconducting with critical temperatures ranging from 1.23 to around 2 K, depending on the film thickness.

Journal of Applied Physics•Aug 15, 2024•8 citations
The surface-electrode ion trap is one of the most promising devices to realize large-scale and integrated quantum information processing. However, a series of problems are faced in the micro-nano fabrication of surface-electrode ion traps. A prominent one is the difficulty to control the thick film surface roughness. A rough electrode surface could produce excessive radio frequency (RF) loss and deteriorate trapping ability of the surface-electrode ion trap. In this paper, a thick film micro-nano fabrication technology to control the surface roughness is presented, which can reduce the roughness of thick film surface-electrode down to 6.2 nm, while being controllable between 6.2 nm and 45 nm. Therefore, it can also provide a basis for studying the influence of electrode surface roughness on trap performance. The micro-nano fabrication technology is not only suitable for surface-electrode ion traps with various configurations, but also be further applied to researches of MEMS, solar cells and surface science.
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.
Achieving high material perfection in aluminum (Al) films and their associated Al/AlOx heterostructures is essential for enhancing the coherence time in superconducting quantum circuits. We grew Al films with thicknesses ranging from 3 to 30 nanometers (nm) epitaxially on sapphire substrates using molecular beam epitaxy (MBE). An integral aspect of our work involved electron-beam (e-beam) evaporation to directly deposit aluminum oxide (Al2O3) films on the freshly grown ultrathin epitaxial Al films in an ultra-high-vacuum (UHV) environment. This in situ oxide deposition is critical for preventing the oxidation of parts of the Al films, avoiding the formation of undesired native oxides, and thereby preserving the nm-thick Al films in their pristine conditions. The thicknesses of our Al films in the study were accurately determined; for example, coherence lengths of 3.0 and 20.2 nm were measured in the nominal 3.0 and 20 nm thick Al films, respectively. These Al films were epitaxially grown on sapphire substrates, showing an orientational relationship, denoted as Al(111)⟨21¯1¯⟩∥sapphire(0001)[21¯1¯0]. The Al/sapphire interface was atomically ordered without any interfacial layers, as confirmed by in situ reflection high-energy electron diffraction (RHEED) and cross-sectional scanning transmission electron microscopy (STEM). All sample surfaces exhibited smoothness with a roughness in the range of 0.1–0.2 nm. The Al films are superconducting with critical temperatures ranging from 1.23 to around 2 K, depending on the film thickness.