Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2005.05818 · Applied Physics Letters

Laser cooling in a chip-scale platform

J. P. McGilligan, K. R. Moore, A. Dellis, G. D. Martinez, Emeric de Clercq, P. F. Griffin, A. S. Arnold, Erling Riis, Rodolphe Boudot, J. Kitching

Published Aug 3, 2020• 63 citations
arXivHTMLPDF

Abstract

Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.

DOI
10.1063/5.0014658

Related papers

A simple imaging solution for chip-scale laser cooling

Alan Bregazzi, Paul F. Griffin, Aidan S. Arnold +6 more

We demonstrate a simple stacked scheme that enables absorption imaging through a hole in the surface of a grating magneto-optical trap (GMOT) chip, placed immediately below a micro-fabricated vacuum cell. The imaging scheme is capable of overcoming the reduced optical access and surface scatter that is associated with this chip-scale platform while further permitting both trapping and imaging of the atoms from a single incident laser beam. The through-hole imaging is used to characterize the impact of the reduced optical overlap volume of the GMOT in the chip-scale cell, with an outlook to an optimized atom number in low volume systems.

arXiv:2108.12008•Applied Physics Letters•Nov 1, 2021•25 citations

Enabling the mass production of a chip-scale laser cooling platform

Alan Bregazzi, S. Dyer, Paul F. Griffin +4 more

A low-cost, mass-producible laser-cooling platform would have a transformative effect in the burgeoning field of quantum technologies and the wider research of atomic sensors. Recent advancements in the micro-fabrication of diffractive optics and vacuum apparatus have paved the way for a simple, stackable solution to the laser cooling of alkali atoms. In this paper we will highlight our recent investigations into a chip-scale, cold-atom platform, outlining our approach for on-chip wavelength referencing, examining a solution for imaging atoms in a planar stacked device, and finally discussing the limitations to passively pumped vacuum longevity. These results will be discussed in the context of an outlined road-map for the production and commercialisation of chip-scale, cold-atom sensors.

Quantum Technology: Driving Commercialisation of an Enabling Science•Oct 6, 2021•4 citations

Two-Photon Imaging of a Magneto-Optical Trap in a Micro-Fabricated Cell for Cold-Atom Sensors

J. P. McGilligan, Kaitlin Moore, Rodolphe Boudot +5 more

We have produced a sample of laser-cooled atoms in a micro-fabricated alkali vapor cell using a grating MOT to direct the beams. We show that by detecting the blue fluorescence resulting from a two-photon cascade transition, we improve the rejection of cooling light scattered from the grating.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Apr 1, 2019•1 citation

Micro-fabricated components for cold atom sensors

J. P. McGilligan, Kevin Francis Gallacher, Paul F. Griffin +3 more

Laser cooled atoms have proven transformative for precision metrology, playing a pivotal role in state-of-the-art clocks and interferometers and having the potential to provide a step-change in our modern technological capabilities. To successfully explore their full potential, laser cooling platforms must be translated from the laboratory environment and into portable, compact quantum sensors for deployment in practical applications. This transition requires the amalgamation of a wide range of components and expertise if an unambiguously chip-scale cold atom sensor is to be realized. We present recent developments in cold-atom sensor miniaturization, focusing on key components that enable laser cooling on the chip-scale. The design, fabrication, and impact of the components on sensor scalability and performance will be discussed with an outlook to the next generation of chip-scale cold atom devices.

arXiv:2208.00680•Review of Scientific Instruments•Sep 1, 2022•64 citations

Grating chips for quantum technologies

J. P. McGilligan, Paul F. Griffin, Rachel Elvin +3 more

Rb atoms to 3 μK in a micro-fabricated grating magneto-optical trap (GMOT), enabling future mass-deployment in highly accurate compact quantum sensors. We magnetically trap the atoms, and use Larmor spin precession for magnetic sensing in the vicinity of the atomic sample. Finally, we demonstrate an array of magneto-optical traps with a single laser beam, which will be utilised for future cold atom gradiometry.

arXiv:1702.04150•Scientific Reports•Mar 17, 2017•87 citations

Contributed Review: The feasibility of a fully miniaturized magneto-optical trap for portable ultracold quantum technology

J. A. Rushton, M. Aldous, Matthew Himsworth

Experiments using laser cooled atoms and ions show real promise for practical applications in quantum-enhanced metrology, timing, navigation, and sensing as well as exotic roles in quantum computing, networking, and simulation. The heart of many of these experiments has been translated to microfabricated platforms known as atom chips whose construction readily lend themselves to integration with larger systems and future mass production. To truly make the jump from laboratory demonstrations to practical, rugged devices, the complex surrounding infrastructure (including vacuum systems, optics, and lasers) also needs to be miniaturized and integrated. In this paper we explore the feasibility of applying this approach to the Magneto-Optical Trap; incorporating the vacuum system, atom source and optical geometry into a permanently sealed micro-litre system capable of maintaining 10(-10) mbar for more than 1000 days of operation with passive pumping alone. We demonstrate such an engineering challenge is achievable using recent advances in semiconductor microfabrication techniques and materials.

arXiv:1405.3148•Review of Scientific Instruments•Dec 1, 2014•126 citations
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto-optical trap (GMOT) is incorporated with a 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.
We demonstrate a simple stacked scheme that enables absorption imaging through a hole in the surface of a grating magneto-optical trap (GMOT) chip, placed immediately below a micro-fabricated vacuum cell. The imaging scheme is capable of overcoming the reduced optical access and surface scatter that is associated with this chip-scale platform while further permitting both trapping and imaging of the atoms from a single incident laser beam. The through-hole imaging is used to characterize the impact of the reduced optical overlap volume of the GMOT in the chip-scale cell, with an outlook to an optimized atom number in low volume systems.
A low-cost, mass-producible laser-cooling platform would have a transformative effect in the burgeoning field of quantum technologies and the wider research of atomic sensors. Recent advancements in the micro-fabrication of diffractive optics and vacuum apparatus have paved the way for a simple, stackable solution to the laser cooling of alkali atoms. In this paper we will highlight our recent investigations into a chip-scale, cold-atom platform, outlining our approach for on-chip wavelength referencing, examining a solution for imaging atoms in a planar stacked device, and finally discussing the limitations to passively pumped vacuum longevity. These results will be discussed in the context of an outlined road-map for the production and commercialisation of chip-scale, cold-atom sensors.
Laser cooled atoms have proven transformative for precision metrology, playing a pivotal role in state-of-the-art clocks and interferometers and having the potential to provide a step-change in our modern technological capabilities. To successfully explore their full potential, laser cooling platforms must be translated from the laboratory environment and into portable, compact quantum sensors for deployment in practical applications. This transition requires the amalgamation of a wide range of components and expertise if an unambiguously chip-scale cold atom sensor is to be realized. We present recent developments in cold-atom sensor miniaturization, focusing on key components that enable laser cooling on the chip-scale. The design, fabrication, and impact of the components on sensor scalability and performance will be discussed with an outlook to the next generation of chip-scale cold atom devices.
Experiments using laser cooled atoms and ions show real promise for practical applications in quantum-enhanced metrology, timing, navigation, and sensing as well as exotic roles in quantum computing, networking, and simulation. The heart of many of these experiments has been translated to microfabricated platforms known as atom chips whose construction readily lend themselves to integration with larger systems and future mass production. To truly make the jump from laboratory demonstrations to practical, rugged devices, the complex surrounding infrastructure (including vacuum systems, optics, and lasers) also needs to be miniaturized and integrated. In this paper we explore the feasibility of applying this approach to the Magneto-Optical Trap; incorporating the vacuum system, atom source and optical geometry into a permanently sealed micro-litre system capable of maintaining 10(-10) mbar for more than 1000 days of operation with passive pumping alone. We demonstrate such an engineering challenge is achievable using recent advances in semiconductor microfabrication techniques and materials.