We discuss the implementation of optical quantum networks where the interface between stationary and photonic qubits is realized by optomechanical transducers [K. Stannigel et al., Phys. Rev. Lett. 105, 220501 (2010)]. This approach does not rely on the optical properties of the qubit and thereby enables optical quantum communication applications for a wide range of solid-state spin- and charge-based systems. We present an effective description of such networks for many qubits and give a derivation of a state transfer protocol for long-distance quantum communication. We also describe how to mediate local on-chip interactions by means of the optomechanical transducers that can be used for entangling gates. We finally discuss experimental systems for the realization of our proposal.
We discuss the implementation of optical quantum networks where the interface between stationary and photonic qubits is realized by optomechanical transducers [K. Stannigel et al., Phys. Rev. Lett. 105, 220501 (2010)]. This approach does not rely on the optical properties of the qubit and thereby enables optical quantum communication applications for a wide range of solid-state spin- and charge-based systems. We present an effective description of such networks for many qubits and give a derivation of a state transfer protocol for long-distance quantum communication. We also describe how to mediate local on-chip interactions by means of the optomechanical transducers that can be used for entangling gates. We finally discuss experimental systems for the realization of our proposal.
We describe a new scheme to interconvert stationary and photonic qubits which is based on indirect qubit-light interactions mediated by a mechanical resonator. This approach does not rely on the specific optical response of the qubit and thereby enables optical quantum interfaces for a wide range of solid state spin and charge based systems. We discuss the implementation of state transfer protocols between distant nodes of a quantum network and show that high transfer fidelities can be achieved under realistic experimental conditions.
We present a scheme of control for the arbitrary optical interface mediated by a nanoscale mechanical oscillator between flying qubits and optical nonactive solid-state qubits. This quantum interface lays the foundation for many key functions of a quantum network, such as transferring, swapping, and entangling qubits between distant nodes of a quantum network. Numerical simulations of the quantum interface operations show high fidelities and robust tolerance under realistic experimental conditions. Compared with a previous scheme [K. Stannigel et al., Phys. Rev. Lett. 105, 220501 (2010)], it may significantly increase the speed of state transfer operation of high fidelity.
The first quantum revolution has brought us the classical Internet and information technology. Today, as technology advances rapidly, the second quantum revolution quietly arrives, with a crucial moment for quantum technology to establish large-scale quantum networks. However, solid-state quantum bits (such as superconducting and semiconductor qubits) typically operate in the microwave frequency range, making it challenging to transmit signals over long distances. Therefore, there is an urgent need to develop quantum transducer chips capable of converting microwaves into optical photons in the communication band, since the thermal noise of optical photons at room temperature is negligible, rendering them an ideal information carrier for large-scale spatial communication. Such devices are important for connecting different physical platforms and efficiently transmitting quantum information. This paper focuses on the fast-developing field of optomechanical quantum transducers, which has flourished over the past decade, yielding numerous advanced achievements. We categorize transducers based on various mechanical resonators and discuss their principles of operation and their achievements. Based on existing research on optomechanical transducers, we compare the parameters of several mechanical resonators and analyze their advantages and limitations, as well as provide prospects for the future development of quantum transducers.
A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities beyond those of classical networks. Superconducting qubits hold promise for scalable quantum computation at microwave frequencies, but must operate in an isolated cryogenic environment; meanwhile, quantum communication over long distances has been demonstrated with optical photons. A fast, quantum-coherent interface between the two would be a key element of a large-scale quantum network or distributed quantum computer.In this thesis, we describe the theoretical basis as well as the practical design and development of a device incorporating a silicon optomechanical nanobeam and an aluminum-nitride-based electromechanical transducer. We find that this class of device has the potential to approach ideal quantum microwave-optical transduction. Finally, we experimentally demonstrate classical, continuous-wave operation of such a device with internal conversion efficiencies above 1%. This device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20 ns pulses.
Faithful conversion of quantum signals between microwave and optical frequencies is crucial for building quantum networks based on superconducting circuits and for detection of weak microwave signals.A promising route towards this task uses transducers based on mechanical oscillators, which interact with light via radiation pressure and with microwave fields by electrostatic forces.Existing theoretical proposals and experimental efforts focus on two avenues towards optomechanical transduction: time-independent schemes for conversion of propagating fields or state transfer via adiabatic passage.The former approach results in simple experimental setups but its applicability is limited by narrow conversion bandwidth.The latter strategy avoids this problem; nevertheless, this gain requires complex time-dependent control schemes and strong opto-and electromechanical coupling, which is out of reach for current systems.In an ideal optomechanical transducer, we would like to combine the advantages of both strategies, namely large bandwidth and simple, time-independent control.In this dissertation, I tackle this challenge and develop two schemes for quantum networking of superconducting circuits based on two different tactics.In the first case, the transducer is optimized for a specific task: generation of entanglement between two superconducting qubits.I show how two established experimental techniques-parity measurements on superconducting qubits and optomechanical force sensing-can be combined to create a conceptually simple device, in which entanglement between the qubits is generated by measurement and postselection.Second, I demonstrate that an array of optomechanical transducers is capable of converting arbitrary input signals within a large bandwidth.The conversion process is based on adiabatic passage but, unlike existing proposals, uses spatial (and not temporal) variation of the system parameters.This approach does not require strong coupling and significantly reduces added noise.Together, these two protocols pave the way to future quantum networks with superconducting systems.The scheme for entanglement generation can be implemented with current experimental technology and is well suited for proof of principle experiments.Large quantum networks with many nodes will, on the other hand, require transducers capable of reaching high communication rates.This goal can be achieved with the large bandwidth of optoelectromechanical arrays.
Optical quantum networks for distributing entanglement between quantum machines will enable distributed quantum computing, secure communications and new sensing methods. These networks will contain quantum transducers for connecting computing qubits to travelling optical photon qubits, and quantum repeater links for distributing entanglement at long distances. In this talk I present implementations of quantum hardware for repeaters and transducers using nano-photonics and rare-earth ions, like ytterbium and erbium, exhibiting highly coherent optical and spin transitions in a solid-state environment. In particular, i discuss optically addressable single quantum bits with single shot readout based on ytterbium 171 atoms, and on-chip storage and processing of photons using erbium ensembles coupled to silicon photonics.