Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1105.3566 · Physical Review A

Hybrid quantum repeater with encoding

Nadja K. Bernardes, Peter van Loock

Published Nov 1, 2012• 18 citations
arXivHTMLPDF

Abstract

We present an encoded hybrid quantum repeater scheme using qubit-repetition and Calderbank-Shor-Steane codes. For the case of repetition codes, we propose an explicit implementation of the quantum error-correction protocol. Moreover, we analyze the entangled-pair distribution rate for the hybrid quantum repeater with encoding and we clearly identify trade-offs between the efficiency of the codes, the memory-decoherence time, and the local gate errors. Finally, we show that in the presence of reasonable imperfections our system can achieve rates of roughly 24 Hz per memory for 20 km repeater spacing, a final distance of 1280 km, and final fidelity of about 0.95.

DOI
10.1103/physreva.86.052301

Related papers

Scalable entanglement distribution using encoded hybrid repeater chains

Stav Haldar, Saikat Guha, Don Towsley +1 more

Long-distance entanglement distribution requires error correction protocols to compensate for qubit decoherence in quantum memories and noise introduced during entanglement swapping. We argue that repeater chains with error-correction capabilities should exploit more than one physical platform, combining the complementary strengths of different quantum memory technologies into a single hybrid repeater architecture. An important constituent of such an architecture is a hybrid repeater which combines type-1 memories, characterized by fast entanglement generation rates and suitability for multiplexing, and type-2 memories that offer long coherence times and low two-qubit gate error rates. Taking the resource-intensive nature of hybrid nodes into account, we propose and analyze repeater chains in which only a subset of nodes need to be hybrid, while the remaining nodes are simpler first-generation repeaters with no error-correction capability. Through detailed Monte Carlo simulations of fault-tolerant encoded repeater chain protocols based on the three-qubit phase-flip repetition code, the $[[7,1,3]]$ Steane code, and the $[[9,1,3]]$ Shor code, we demonstrate that these hybrid architectures outperform pure architectures based on a single memory platform in terms of end-to-end entanglement distribution rate. In our study we develop a full circuit-level noise model of our architectures and examine the impact of an imperfect interface between the two platforms on our hybrid architecture. We also develop a modified version of the swap-as-soon-as-possible policy with multiplexing, more suited to our architecture where some nodes perform error-correction while others do not. This modified policy significantly reduces the information storage time in memory qubits relative to the previously considered swap policies in encoded repeater chains.

quant-pharXiv:2609.19783•Sep 18, 2026•0 citations

Quantum repeater with encoding

Liang Jiang, Jacob M. Taylor, Kae Nemoto +3 more

We propose an approach to implement quantum repeaters for long-distance quantum communication. Our protocol generates a backbone of encoded Bell pairs and uses the procedure of classical error correction during simultaneous entanglement connection. We illustrate that the repeater protocol with simple Calderbank-Shor-Steane encoding can significantly extend the communication distance, while still maintaining a fast key generation rate.

arXiv:0809.3629•Physical Review A•Mar 20, 2009•337 citations

Hybrid Quantum Repeater Using Bright Coherent Light

Peter van Loock, Thaddeus D. Ladd, Kaoru Sanaka +4 more

We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent-light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interactions as for the initial entanglement distribution. Finally, the entanglement is stored in a nuclear-spin-based quantum memory. With our system, qubit-communication rates approaching 100 Hz over 1280 km with fidelities near 99% are possible for reasonable local gate errors.

arXiv:quant-ph/0510202•Physical Review Letters•Jun 19, 2006•296 citations

Secret key rates for an encoded quantum repeater

Sylvia Bratzik, Hermann Kampermann, Dagmar Bruß

We investigate secret key rates for the quantum repeater using encoding [L. Jiang et al., Phys. Rev. A 79, 032325 (2009)] and compare them to the standard repeater scheme by Briegel, D\"ur, Cirac, and Zoller. The former scheme has the advantage of a minimal consumption of classical communication. We analyze the trade-off in the secret key rate between the communication time and the required resources. For this purpose we introduce an error model for the repeater using encoding which allows for input Bell states with a fidelity smaller than one, in contrast to the model given by L. Jiang et al. [Phys. Rev. A 79, 032325 (2009)]. We show that one can correct additional errors in the encoded connection procedure of this repeater and develop a suitable decoding algorithm. Furthermore, we derive the rate of producing entangled pairs for the quantum repeater using encoding and give the minimal parameter values (gate quality and initial fidelity) for establishing a nonzero secret key. We find that the generic quantum repeater is optimal regarding the secret key rate per memory per second and show that the encoded quantum repeater using the simple three-qubit repetition code can even have an advantage with respect to the resources compared to other recent quantum repeater schemes with encoding.

arXiv:1401.6859•Physical Review A•Mar 31, 2014•25 citations

Interoperability in encoded quantum repeater networks

Shota Nagayama, Byung-Soo Choi, Simon J. Devitt +2 more

The future of quantum repeater networking will require interoperability between various error-correcting codes. A few specific code conversions and even a generalized method are known, however, no detailed analysis of these techniques in the context of quantum networking has been performed. In this paper we analyze a generalized procedure to create Bell pairs encoded heterogeneously between two separate codes used often in error-corrected quantum repeater network designs. We begin with a physical Bell pair and then encode each qubit in a different error-correcting code, using entanglement purification to increase the fidelity. We investigate three separate protocols for preparing the purified encoded Bell pair. We calculate the error probability of those schemes between the Steane [[7,1,3]] code, a distance-3 surface code, and single physical qubits by Monte Carlo simulation under a standard Pauli error model and estimate the resource efficiency of the procedures. A local gate error rate of ${10}^{\ensuremath{-}3}$ allows us to create high-fidelity logical Bell pairs between any of our chosen codes. We find that a postselected model, where any detected parity flips in code stabilizers result in a restart of the protocol, performs the best.

arXiv:1508.04599•Physical Review A•Apr 26, 2016•17 citations

Realistic Simulation of Quantum Repeater with Encoding and Classical Error Correction

Sagar Patange, Caitao Zhan, Bikun Li +4 more

Quantum repeaters are essential for scalable long-distance quantum networking. As quantum information processing moves toward fault-tolerant and error-corrected operations, it becomes increasingly important to study quantum repeaters that also move beyond raw physical entanglement and towards logical entanglement. In this paper, we implement and simulate the quantum repeater with encoding and classical error correction (QRE-CEC) protocol in SeQUeNCe, a discrete-event simulator of quantum networks. The protocol distributes logical Bell pairs, performs encoded entanglement swapping, and uses classical error correction for the decoding of entanglement swapping measurement outcomes to determine Pauli-frame corrections. For this study, we extend SeQUeNCe with a stabilizer-based backend, add support for CSS code-based encoded operations, and integrate gate, measurement, idle decoherence, and state-initialization noise models. Our simulation results show that QRE-CEC suppresses all modeled errors to the second order. Also, QRE-CEC can distribute logical Bell pairs with 0.91 fidelity over a distance of 2000 km under the parameter regimes we study. Beyond protocol-level performance evaluation, our implementation exposes practical simulator and control-plane challenges that are typically abstracted away in theoretical studies.

quant-pharXiv:2605.06928•May 11, 2026•1 citation
We present an encoded hybrid quantum repeater scheme using qubit-repetition and Calderbank-Shor-Steane codes. For the case of repetition codes, we propose an explicit implementation of the quantum error-correction protocol. Moreover, we analyze the entangled-pair distribution rate for the hybrid quantum repeater with encoding and we clearly identify trade-offs between the efficiency of the codes, the memory-decoherence time, and the local gate errors. Finally, we show that in the presence of reasonable imperfections our system can achieve rates of roughly 24 Hz per memory for 20 km repeater spacing, a final distance of 1280 km, and final fidelity of about 0.95.
Long-distance entanglement distribution requires error correction protocols to compensate for qubit decoherence in quantum memories and noise introduced during entanglement swapping. We argue that repeater chains with error-correction capabilities should exploit more than one physical platform, combining the complementary strengths of different quantum memory technologies into a single hybrid repeater architecture. An important constituent of such an architecture is a hybrid repeater which combines type-1 memories, characterized by fast entanglement generation rates and suitability for multiplexing, and type-2 memories that offer long coherence times and low two-qubit gate error rates. Taking the resource-intensive nature of hybrid nodes into account, we propose and analyze repeater chains in which only a subset of nodes need to be hybrid, while the remaining nodes are simpler first-generation repeaters with no error-correction capability. Through detailed Monte Carlo simulations of fault-tolerant encoded repeater chain protocols based on the three-qubit phase-flip repetition code, the [[7,1,3]][[7,1,3]][[7,1,3]] Steane code, and the [[9,1,3]][[9,1,3]][[9,1,3]] Shor code, we demonstrate that these hybrid architectures outperform pure architectures based on a single memory platform in terms of end-to-end entanglement distribution rate. In our study we develop a full circuit-level noise model of our architectures and examine the impact of an imperfect interface between the two platforms on our hybrid architecture. We also develop a modified version of the swap-as-soon-as-possible policy with multiplexing, more suited to our architecture where some nodes perform error-correction while others do not. This modified policy significantly reduces the information storage time in memory qubits relative to the previously considered swap policies in encoded repeater chains.
We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent-light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interactions as for the initial entanglement distribution. Finally, the entanglement is stored in a nuclear-spin-based quantum memory. With our system, qubit-communication rates approaching 100 Hz over 1280 km with fidelities near 99% are possible for reasonable local gate errors.
We investigate secret key rates for the quantum repeater using encoding [L. Jiang et al., Phys. Rev. A 79, 032325 (2009)] and compare them to the standard repeater scheme by Briegel, D\"ur, Cirac, and Zoller. The former scheme has the advantage of a minimal consumption of classical communication. We analyze the trade-off in the secret key rate between the communication time and the required resources. For this purpose we introduce an error model for the repeater using encoding which allows for input Bell states with a fidelity smaller than one, in contrast to the model given by L. Jiang et al. [Phys. Rev. A 79, 032325 (2009)]. We show that one can correct additional errors in the encoded connection procedure of this repeater and develop a suitable decoding algorithm. Furthermore, we derive the rate of producing entangled pairs for the quantum repeater using encoding and give the minimal parameter values (gate quality and initial fidelity) for establishing a nonzero secret key. We find that the generic quantum repeater is optimal regarding the secret key rate per memory per second and show that the encoded quantum repeater using the simple three-qubit repetition code can even have an advantage with respect to the resources compared to other recent quantum repeater schemes with encoding.
The future of quantum repeater networking will require interoperability between various error-correcting codes. A few specific code conversions and even a generalized method are known, however, no detailed analysis of these techniques in the context of quantum networking has been performed. In this paper we analyze a generalized procedure to create Bell pairs encoded heterogeneously between two separate codes used often in error-corrected quantum repeater network designs. We begin with a physical Bell pair and then encode each qubit in a different error-correcting code, using entanglement purification to increase the fidelity. We investigate three separate protocols for preparing the purified encoded Bell pair. We calculate the error probability of those schemes between the Steane [[7,1,3]] code, a distance-3 surface code, and single physical qubits by Monte Carlo simulation under a standard Pauli error model and estimate the resource efficiency of the procedures. A local gate error rate of ${10}^{\ensuremath{-}3}$ allows us to create high-fidelity logical Bell pairs between any of our chosen codes. We find that a postselected model, where any detected parity flips in code stabilizers result in a restart of the protocol, performs the best.
Quantum repeaters are essential for scalable long-distance quantum networking. As quantum information processing moves toward fault-tolerant and error-corrected operations, it becomes increasingly important to study quantum repeaters that also move beyond raw physical entanglement and towards logical entanglement. In this paper, we implement and simulate the quantum repeater with encoding and classical error correction (QRE-CEC) protocol in SeQUeNCe, a discrete-event simulator of quantum networks. The protocol distributes logical Bell pairs, performs encoded entanglement swapping, and uses classical error correction for the decoding of entanglement swapping measurement outcomes to determine Pauli-frame corrections. For this study, we extend SeQUeNCe with a stabilizer-based backend, add support for CSS code-based encoded operations, and integrate gate, measurement, idle decoherence, and state-initialization noise models. Our simulation results show that QRE-CEC suppresses all modeled errors to the second order. Also, QRE-CEC can distribute logical Bell pairs with 0.91 fidelity over a distance of 2000 km under the parameter regimes we study. Beyond protocol-level performance evaluation, our implementation exposes practical simulator and control-plane challenges that are typically abstracted away in theoretical studies.