Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1009.0036 · Journal of Applied Physics

A cryogenic surface-electrode elliptical ion trap for quantum simulation

Robert Clark, Ziliang Carter Lin, Kenan S. Diab, Isaac L. Chuang

Published Apr 1, 2011• 7 citations
arXivHTMLPDF

Abstract

Two-dimensional crystals of trapped ions are a promising system with which to implement quantum simulations of challenging problems such as spin frustration. Here, we present a design for a surface-electrode elliptical ion trap which produces a 2-D ion crystal and is amenable to microfabrication, which would enable higher simulated coupling rates, as well as interactions based on magnetic forces generated by currents which may be incorporated into the trap structure. Working in an 11 K cryogenic environment, we experimentally verify to within 10% a numerical model of the structure of ion crystals in the trap, given the measured trap anisotropy. We also explore the possibility of implementing quantum simulation using magnetic forces, and calculate J-coupling rates on the order of 103 s-1 for a trap scale of 10 μm, using a current of 1 A.

DOI
10.1063/1.3565053

Related papers

Monolithic microfabricated ion trap forquantum information processing

Fayaz A. Shaikh

The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.

•Mar 26, 2013•0 citations

A two-dimensional lattice ion trap for quantum simulation

Robert Clark, Tongyan Lin, Kenneth R. Brown +1 more

Quantum simulations of spin systems could enable the solution of problems that otherwise require infeasible classical resources. Such a simulation may be implemented using a well-controlled system of effective spins, such as a two-dimensional lattice of locally interacting ions. We propose here a layered planar rf trap design that can be used to create arbitrary two-dimensional lattices of ions. The design also leads naturally to ease of microfabrication. As a first experimental demonstration, we confine S88r+ ions in a millimeter-scale lattice trap and verify numerical models of the trap by measuring the motional frequencies. We also confine 440 nm diameter charged microspheres and observe ion-ion repulsion between ions in neighboring lattice sites. Our design, when scaled to smaller ion-ion distances, is appropriate for quantum simulation schemes, e.g., that of Porras and Cirac [Phys. Rev. Lett. 92, 207901 (2004)]. We note, however, that in practical realizations of the trap, an increase in the secular frequency with decreasing ion spacing may make a coupling rate that is large relative to the decoherence rate in such a trap difficult to achieve.

arXiv:0809.2824•Journal of Applied Physics•Jan 1, 2009•54 citations

Characterization of Microfabricated Surface Ion Traps.

Craig Hogle

Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.

•Jul 4, 2018•0 citations

Designing spin-spin interactions with one and two dimensional ion crystals in planar micro traps

J. Welzel, A. Bautista-Salvador, C. Abarbanel +4 more

We discuss the experimental feasibility of quantum simulation with trapped ion crystals, using magnetic field gradients. We describe a micro structured planar ion trap, which contains a central wire loop generating a strong magnetic gradient of about 20 T/m in an ion crystal held about 160 μm above the surface. On the theoretical side, we extend a proposal about spin-spin interactions via magnetic gradient induced coupling (MAGIC) [J. Phys. B At. Mol. Opt. Phys. 42, 154009 (2009)]. We describe aspects where planar ion traps promise novel physics: spin-spin coupling strengths of transversal eigenmodes exhibit significant advantages over the coupling schemes in longitudinal direction that have been previously investigated. With a chip device and a magnetic field coil with small inductance, a resonant enhancement of magnetic spin forces through the application of alternating magnetic field gradients is proposed. Such resonantly enhanced spin-spin coupling may be used, for instance, to create Schrödinger cat states. Finally we investigate magnetic gradient interactions in two-dimensional ion crystals, and discuss frustration effects in such two-dimensional arrangements.

arXiv:1102.3645•The European Physical Journal D•Jul 27, 2011•47 citations

Quantum simulation of the hexagonal Kitaev model with trapped ions

Roman Schmied, Janus H. Wesenberg, Dietrich G. Leibfried

We present a detailed study of quantum simulations of coupled spin systems in surface-electrode (SE) ion-trap arrays, and illustrate our findings with a proposed implementation of the hexagonal Kitaev model (Kitaev A 2006 Ann. Phys. 321 2). The effective (pseudo)spin interactions making up such quantum simulators are found to be proportional to the dipole–dipole interaction between the trapped ions, and are mediated by motion that can be driven by state-dependent forces. The precise forms of the trapping potentials and the interactions are derived in the presence of an SE and a cover electrode. These results are the starting point to derive an optimized SE geometry for trapping ions in the desired honeycomb lattice of Kitaev's model, where we design the dipole–dipole interactions in a way that allows for coupling all three bond types of the model simultaneously, without the need for time discretization. Finally, we propose a simple wire structure that can be incorporated into a microfabricated chip to generate localized state-dependent forces which drive the couplings prescribed by this particular model; such a wire structure should be adaptable to many other situations.

arXiv:1107.0181•New Journal of Physics•Nov 25, 2011•50 citations

Surface-electrode ion traps for scalable quantum computing

D. T. C. Allcock

The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.

•Jan 1, 2011•6 citations
Two-dimensional crystals of trapped ions are a promising system with which to implement quantum simulations of challenging problems such as spin frustration. Here, we present a design for a surface-electrode elliptical ion trap which produces a 2-D ion crystal and is amenable to microfabrication, which would enable higher simulated coupling rates, as well as interactions based on magnetic forces generated by currents which may be incorporated into the trap structure. Working in an 11 K cryogenic environment, we experimentally verify to within 10% a numerical model of the structure of ion crystals in the trap, given the measured trap anisotropy. We also explore the possibility of implementing quantum simulation using magnetic forces, and calculate J-coupling rates on the order of 103 s-1 for a trap scale of 10 μm, using a current of 1 A.
The objective of this research is to design, fabricate, and demonstrate a microfabricated \nmonolithic ion trap for applications in quantum computation and quantum simulation. \nMost current microfabricated ion trap designs are based on planar-segmented surface electrodes. \nAlthough promising scalability to trap arrays containing ten to one hundred ions, \nthese planar designs suffer from the challenges of shallow trap depths, radial asymmetry of \nthe confining potential, and electrode charging resulting from laser interactions with dielectric \nsurfaces. In this research, the design, fabrication, and testing of a monolithic \nand symmetric two-level ion trap is presented. This ion trap overcomes the challenges of \nsurface-electrode ion traps. Numerical electrostatic simulations show that this symmetric \ntrap produces a deep (1 eV for 171Yb+ ion), radially symmetric RF confinement potential. \nThe trap has an angled through-chip slot that allows back-side ion loading and generous \nthrough laser access, while avoiding surface-light scattering and dielectric charging that \ncan corrupt the design control electrode compensating potentials. The geometry of the trap \nand its dimensions are optimized for trapping long and linear ion chains with equal spacing \nfor use with quantum simulation problems and quantum computation architectures.
Quantum simulations of spin systems could enable the solution of problems that otherwise require infeasible classical resources. Such a simulation may be implemented using a well-controlled system of effective spins, such as a two-dimensional lattice of locally interacting ions. We propose here a layered planar rf trap design that can be used to create arbitrary two-dimensional lattices of ions. The design also leads naturally to ease of microfabrication. As a first experimental demonstration, we confine S88r+ ions in a millimeter-scale lattice trap and verify numerical models of the trap by measuring the motional frequencies. We also confine 440 nm diameter charged microspheres and observe ion-ion repulsion between ions in neighboring lattice sites. Our design, when scaled to smaller ion-ion distances, is appropriate for quantum simulation schemes, e.g., that of Porras and Cirac [Phys. Rev. Lett. 92, 207901 (2004)]. We note, however, that in practical realizations of the trap, an increase in the secular frequency with decreasing ion spacing may make a coupling rate that is large relative to the decoherence rate in such a trap difficult to achieve.
Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.
We discuss the experimental feasibility of quantum simulation with trapped ion crystals, using magnetic field gradients. We describe a micro structured planar ion trap, which contains a central wire loop generating a strong magnetic gradient of about 20 T/m in an ion crystal held about 160 μm above the surface. On the theoretical side, we extend a proposal about spin-spin interactions via magnetic gradient induced coupling (MAGIC) [J. Phys. B At. Mol. Opt. Phys. 42, 154009 (2009)]. We describe aspects where planar ion traps promise novel physics: spin-spin coupling strengths of transversal eigenmodes exhibit significant advantages over the coupling schemes in longitudinal direction that have been previously investigated. With a chip device and a magnetic field coil with small inductance, a resonant enhancement of magnetic spin forces through the application of alternating magnetic field gradients is proposed. Such resonantly enhanced spin-spin coupling may be used, for instance, to create Schrödinger cat states. Finally we investigate magnetic gradient interactions in two-dimensional ion crystals, and discuss frustration effects in such two-dimensional arrangements.
We present a detailed study of quantum simulations of coupled spin systems in surface-electrode (SE) ion-trap arrays, and illustrate our findings with a proposed implementation of the hexagonal Kitaev model (Kitaev A 2006 Ann. Phys. 321 2). The effective (pseudo)spin interactions making up such quantum simulators are found to be proportional to the dipole–dipole interaction between the trapped ions, and are mediated by motion that can be driven by state-dependent forces. The precise forms of the trapping potentials and the interactions are derived in the presence of an SE and a cover electrode. These results are the starting point to derive an optimized SE geometry for trapping ions in the desired honeycomb lattice of Kitaev's model, where we design the dipole–dipole interactions in a way that allows for coupling all three bond types of the model simultaneously, without the need for time discretization. Finally, we propose a simple wire structure that can be incorporated into a microfabricated chip to generate localized state-dependent forces which drive the couplings prescribed by this particular model; such a wire structure should be adaptable to many other situations.
The major challenges in trapped-ion quantum computation are to scale up few-ion experiments to many qubits and to improve control techniques so that quantum logic gates can be carried out with higher fidelities. This thesis reports experimental progress in both of these areas. In the early part of the thesis we describe the fabrication of a surface-electrode ion trap, the development of the apparatus and techniques required to operate it and the successful trapping of 40Ca+ ions. Notably we developed methods to control the orientation of the principal axes and to minimise ion micromotion. We propose a repumping scheme that simplifies heating rate measurements for ions with low-lying D levels, and use it to characterise the electric field noise in the trap. Surface-electrode traps are important because they offer a route to dense integration of electronic and optical control elements using existing microfabrication technology. We explore this scaling route by testing a series of three traps that were microfabricated at Sandia National Laboratories. Investigations of micromotion and charging of the surface by laser beams were carried out and improvements to future traps are suggested. Using one of these traps we also investigated anomalous electrical noise from the electrode surfaces and discovered that it can be reduced by cleaning with a pulsed laser. A factor of two decrease was observed; this represents the first in situ removal of this noise source, an important step towards higher gate fidelities. In the second half of the thesis we describe the design and construction of an experiment for the purpose of replacing laser-driven multi-qubit quantum logic gates with microwave-driven ones. We investigate magnetic-field-independent hyperfine qubits in 40Ca+ as suitable qubits for this scheme. We make a design study of how best to integrate an ion trap with the microwave conductors required to implement the gate and propose a novel integrated resonant structure. The trap was fabricated and ions were successfully loaded. Single-qubit experiments show that the microwave fields above the trap are in excellent agreement with software simulations. There are good prospects for demonstrating a multi-qubit gate in the near future. We conclude by discussing the possibilities for larger-scale quantum computation by combining microfabricated traps and microwave control.