Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Characterization of Microfabricated Surface Ion Traps.

Craig Hogle

Published Jul 4, 2018• 0 citations
OpenAlex

Abstract

Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.

Related papers

Controlled inter-site coupling in a two-dimensional ion trap array

Frederick Hakelberg

The understanding of quantum mechanical systems is essential to modern physics and its applications. However, already for entangled systems of a few tens of constituents, exact numerical simulations on classical computers can become impossible. Quantum simulators based on well-controlled quantum system might provide the only effective approach to these systems. Trapped atomic ions offer a uniquely precise and controllable platform. They are used as platforms for, e.g., future quantum computers, quantum simulators, and extremely precise clocks. Quantum-simulation problems of interest and out-of-reach for modern theoretical methods include the dynamics of one-dimensional systems on long time scales and more-than-one dimensional systems with long-range interaction. For the latter, two-dimensional arrays of ions, individually trapped and controlled above microfabricated surface-electrode traps, present a promising approach. In the first realizations so far, the inter-site distance between the ions was too large to allow for sufficient inter-site coupling. We aim for a scalable approach to an analog quantum simulator based on a two-dimensional array of individually trapped ions. As a first demonstration, we operate an array of three magnesium ions in triangular arrangement with a side-length of 40µm. Therein, we previously demonstrated the individual control of internal (electronic) and external (motional) degrees of freedom of the ions. Here, we present the first realization of inter-site coupling in the two-dimensional array. We demonstrate the coupling by a transfer of large coherent states of motion between the sites. We investigate the influence of the amplitude of these motional states in the anharmonic trapping potential and extrapolate to future experiments on the single-phonon level. We apply the real-time control of the coupling and concatenate the two-site coupling to transfer motional excitation between all three sites of the array. To demonstrate the scalability of our techniques, we couple all three sites simultaneously and investigate the evolution of an initial excitation at one and two sites of the array. The latter shows interference effects of the different pathways in the triangle. Current motional heating rates on the order of the inter-site coupling, preclude working with single phonons near the motional ground-state. We present a new experimental apparatus and vacuum chamber which will allow in-situ cleaning of surface-electrode traps. This has shown to reduce motional heating rates by two orders of magnitude. In this apparatus, we additionally realize a magnetic-field insensitive qubit in 25Mg+ with a coherence time exceeding six seconds. We generate the magnetic field around 10.9mT by a hybrid magnet assembly based on solid-state magnets and fine-tuned by electric coils. Once we have reduced the heating rate in the triangle trap array using the new setup, first quantum simulation experiments, investigating spin-frustration or artificial gauge fields, will come in reach. Here our triangle represents a basic, scalable, building block of future latices designed at will.

•Jan 1, 2019•0 citations

Implementing segmented ion trap designs for quantum computing

Gergely Imreh

With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.

•Jan 1, 2008•5 citations

The development of microfabricated ion traps towards quantum information and simulation

Marcus Hughes

Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.

•Jun 16, 2013•0 citations

A two-dimensional lattice ion trap for quantum simulation

Robert Clark, Tongyan Lin, Kenneth R. Brown +1 more

Quantum simulations of spin systems could enable the solution of problems that otherwise require infeasible classical resources. Such a simulation may be implemented using a well-controlled system of effective spins, such as a two-dimensional lattice of locally interacting ions. We propose here a layered planar rf trap design that can be used to create arbitrary two-dimensional lattices of ions. The design also leads naturally to ease of microfabrication. As a first experimental demonstration, we confine S88r+ ions in a millimeter-scale lattice trap and verify numerical models of the trap by measuring the motional frequencies. We also confine 440 nm diameter charged microspheres and observe ion-ion repulsion between ions in neighboring lattice sites. Our design, when scaled to smaller ion-ion distances, is appropriate for quantum simulation schemes, e.g., that of Porras and Cirac [Phys. Rev. Lett. 92, 207901 (2004)]. We note, however, that in practical realizations of the trap, an increase in the secular frequency with decreasing ion spacing may make a coupling rate that is large relative to the decoherence rate in such a trap difficult to achieve.

arXiv:0809.2824•Journal of Applied Physics•Jan 1, 2009•54 citations

High-fidelity quantum and classical control in microfabricated surface ion traps

Daniel Lobser

Trapped ions are among the top candidates for realizing high fidelity gate operations for quantum computation as well as other applications including quantum simulation and sensing [1]. However, scaling these systems up to the number of qubits required to solve interesting problems with conventional macroscopic traps quickly becomes intractable. To overcome the scalability challenge, advanced microfabrication techniques have been developed to support a variety of complex electrode layouts, allowing for precise and dynamic control of confining potentials. Using Sandia’s microfabricated surface ion traps, which feature low heating rates, high trap frequencies, and long trapping times, we demonstrate novel classical control techniques that employ parametric voltage solutions for elegant composition of shuttling operations and accurate control over the curvature of the confining potential. To demonstrate the viability of Sandia's microfabricated ion traps for quantum information processing, we’ve realized of high-fidelity single-qubit gates below a rigorous fault tolerance threshold for general noise [2,3] and two-qubit Mølmer-Sørensen gates with a process fidelity of 99.58(6)%.

Photonics for Quantum (PfQ)•Aug 27, 2021•0 citations

Two-dimensional ion crystals in radio-frequency traps for quantum simulation

Philip Richerme

The computational difficulty of solving fully quantum many-body spin problems is a significant obstacle to understanding the behavior of strongly correlated quantum matter. Experimental ion trap quantum simulation is a promising approach for studying these lattice spin models, but has so far been limited to one-dimensional systems. This work argues that such quantum simulation techniques are extendable to a two-dimensional (2D) ion crystal confined in a radio-frequency (rf) trap. Using appropriately chosen parameters, driven ion motion due to the rf fields can be made small and will not limit the types of quantum spin models that can be experimentally encoded. The rf-driven motion is calculated to modestly reduce the stability region of a 2D crystal and must be considered when designing the 2D trap. The system will be scalable to 100+ quantum particles, far beyond the realm of classical intractability, while maintaining the traditional ion trap strengths of individual-ion control, long quantum coherence times, and site-resolved projective spin measurements.

arXiv:1604.08523•Physical Review A•Sep 20, 2016•43 citations
Current classical computing methods are unable to simulate quantum many-body interactions efficiently.Analog quantum simulators with even small numbers of quantum degrees of freedom are expected to enable the investigation of systems not fully accessible in traditional computing such as condensed-matter systems, quantum chemistry, and material science.Two-dimensional lattices of trapped ions are a good candidate to realize an analog quantum simulator for their addressability, individual control and individual detection.Here, we report on multiple unique lattice surface ion trap designs, microfabricated at Sandia National Laboratories, capable of trapping and interacting up to 4 ions.Ions are held in close proximity in individual all radio-frequency potential minima and interact via their Coulomb repulsion.The Coulomb coupling between ions allows for simulation of spin-spin interactions 1-6 .Control electrodes of the trap can be used to adjust principal axes of the ion's motion and thus enable individual control over the interaction between ions.The lattice trap array architecture tested in this work can be scaled to larger two-dimensional lattices of trapped ions.
The understanding of quantum mechanical systems is essential to modern physics and its applications. However, already for entangled systems of a few tens of constituents, exact numerical simulations on classical computers can become impossible. Quantum simulators based on well-controlled quantum system might provide the only effective approach to these systems. Trapped atomic ions offer a uniquely precise and controllable platform. They are used as platforms for, e.g., future quantum computers, quantum simulators, and extremely precise clocks. Quantum-simulation problems of interest and out-of-reach for modern theoretical methods include the dynamics of one-dimensional systems on long time scales and more-than-one dimensional systems with long-range interaction. For the latter, two-dimensional arrays of ions, individually trapped and controlled above microfabricated surface-electrode traps, present a promising approach. In the first realizations so far, the inter-site distance between the ions was too large to allow for sufficient inter-site coupling. We aim for a scalable approach to an analog quantum simulator based on a two-dimensional array of individually trapped ions. As a first demonstration, we operate an array of three magnesium ions in triangular arrangement with a side-length of 40µm. Therein, we previously demonstrated the individual control of internal (electronic) and external (motional) degrees of freedom of the ions. Here, we present the first realization of inter-site coupling in the two-dimensional array. We demonstrate the coupling by a transfer of large coherent states of motion between the sites. We investigate the influence of the amplitude of these motional states in the anharmonic trapping potential and extrapolate to future experiments on the single-phonon level. We apply the real-time control of the coupling and concatenate the two-site coupling to transfer motional excitation between all three sites of the array. To demonstrate the scalability of our techniques, we couple all three sites simultaneously and investigate the evolution of an initial excitation at one and two sites of the array. The latter shows interference effects of the different pathways in the triangle. Current motional heating rates on the order of the inter-site coupling, preclude working with single phonons near the motional ground-state. We present a new experimental apparatus and vacuum chamber which will allow in-situ cleaning of surface-electrode traps. This has shown to reduce motional heating rates by two orders of magnitude. In this apparatus, we additionally realize a magnetic-field insensitive qubit in 25Mg+ with a coherence time exceeding six seconds. We generate the magnetic field around 10.9mT by a hybrid magnet assembly based on solid-state magnets and fine-tuned by electric coils. Once we have reduced the heating rate in the triangle trap array using the new setup, first quantum simulation experiments, investigating spin-frustration or artificial gauge fields, will come in reach. Here our triangle represents a basic, scalable, building block of future latices designed at will.
With all the key elements of quantum computing in ion traps demonstrated by the research community, the focus is now placed on building more sophisticated traps with larger numbers of ions to allow practical scale information processing. One promising avenue is to store ions in and shuttle them between many independent traps which serve as potential interaction sites. The core of the work described in this thesis is the experimental evaluation of a microfabricated segmented ion trap, built by Sandia National Laboratories ("Sandia trap"). These experiments required construction of a wholly new optical setup including laser and detection systems, a vacuum system and control electronics. Among our experimental achievements were: successful loading of single and pairs of ions in the microscale trap, measurement of ion storage lifetime, measurement of the motional heating rate with a time-resolved Doppler-cooling method — which showed above than average heating, and implemented a single-ion shuttling method — which reliably transferred the ion through a distance of 360 μm (two DC electrode widths away) and back. These results have been used to improve the next version of the Sandia trap design. We also used computer modelling to study several aspects of ion traps: a mesoscopic ion trap designed for fast ion separation, simulated ion loading to quantify requirements for successful trapping in small and shallow traps, and analyzed a precise shuttling method — where the time dependence of the trapping potential is engineered such that there is minimal motional heating. The results show that ion trap arrays at the 100 μm distance scale are feasible and suggests that such multiple trap designs merit further study.
Trapped ions within Paul traps have shown to be a promising architecture in the realisation of a quantum information processor together with the ability of providing quantum simulations. Linear Paul traps have demonstrated long coherence times with ions being well isolated from the environment, single and multi-qubit gates and the high fidelity detection of states. The scalability to large number of qubits, incorporating all the previous achievements requires an array of linear ion traps. Microfabrication techniques allow for fabrication and micron level accuracy of the trap electrode dimensions through photolithography techniques. The first part of this thesis presents the experiential setup and trapping of Yb+ ions needed to test large ion trap arrays. This include vacuum systems that can host advanced symmetric and asymmetric ion traps with up to 90 static voltage control electrodes. Demonstration of a single trapped Yb+ ion within a two-layer macroscopic ion trap is presented. with an ion-electrode distance of 310(10) µm. The anomalous heating rate and spectral noise density of the trap was measured, a main form of decoherence within ion traps. The second half of this thesis presents the design and fabrication of multi-layer asymmetric ion traps. This allows for isolated electrodes that cannot be accessed via surface pathways, allowing for higher density of electrodes as well as creating novel trap designs that allow for the potential of quantum simulations to be demonstrated. These include two-dimensional lattices and ring trap designs in which the isolated electrodes provide more control in the ion position. For the microfabrication of these traps I present a novel high-aspect ratio electroplated electrode design that provides shielding of the dielectric layer. This provides a means to mitigate stray electric field due to charge build up on the dielectric surfaces. Electrical testing of the trap structures was performed to test bulk breakdown and surface flashover of the ion trap architectures. Results showed sufficient isolation between electrodes for both radio frequency and static breakdown. Surface flashover voltage measurements over the dielectric layer showed an improvement of more than double over previous results using a new fabrication technique. This will allow for more powerful ion trap chips needed for the next generation of microfabricated ion trap arrays for scalable quantum technologies.
Quantum simulations of spin systems could enable the solution of problems that otherwise require infeasible classical resources. Such a simulation may be implemented using a well-controlled system of effective spins, such as a two-dimensional lattice of locally interacting ions. We propose here a layered planar rf trap design that can be used to create arbitrary two-dimensional lattices of ions. The design also leads naturally to ease of microfabrication. As a first experimental demonstration, we confine S88r+ ions in a millimeter-scale lattice trap and verify numerical models of the trap by measuring the motional frequencies. We also confine 440 nm diameter charged microspheres and observe ion-ion repulsion between ions in neighboring lattice sites. Our design, when scaled to smaller ion-ion distances, is appropriate for quantum simulation schemes, e.g., that of Porras and Cirac [Phys. Rev. Lett. 92, 207901 (2004)]. We note, however, that in practical realizations of the trap, an increase in the secular frequency with decreasing ion spacing may make a coupling rate that is large relative to the decoherence rate in such a trap difficult to achieve.
Trapped ions are among the top candidates for realizing high fidelity gate operations for quantum computation as well as other applications including quantum simulation and sensing [1]. However, scaling these systems up to the number of qubits required to solve interesting problems with conventional macroscopic traps quickly becomes intractable. To overcome the scalability challenge, advanced microfabrication techniques have been developed to support a variety of complex electrode layouts, allowing for precise and dynamic control of confining potentials. Using Sandia’s microfabricated surface ion traps, which feature low heating rates, high trap frequencies, and long trapping times, we demonstrate novel classical control techniques that employ parametric voltage solutions for elegant composition of shuttling operations and accurate control over the curvature of the confining potential. To demonstrate the viability of Sandia's microfabricated ion traps for quantum information processing, we’ve realized of high-fidelity single-qubit gates below a rigorous fault tolerance threshold for general noise [2,3] and two-qubit Mølmer-Sørensen gates with a process fidelity of 99.58(6)%.
The computational difficulty of solving fully quantum many-body spin problems is a significant obstacle to understanding the behavior of strongly correlated quantum matter. Experimental ion trap quantum simulation is a promising approach for studying these lattice spin models, but has so far been limited to one-dimensional systems. This work argues that such quantum simulation techniques are extendable to a two-dimensional (2D) ion crystal confined in a radio-frequency (rf) trap. Using appropriately chosen parameters, driven ion motion due to the rf fields can be made small and will not limit the types of quantum spin models that can be experimentally encoded. The rf-driven motion is calculated to modestly reduce the stability region of a 2D crystal and must be considered when designing the 2D trap. The system will be scalable to 100+ quantum particles, far beyond the realm of classical intractability, while maintaining the traditional ion trap strengths of individual-ion control, long quantum coherence times, and site-resolved projective spin measurements.