We report the precise characterization of the optical potential obtained by injecting a distributed-feedback erbium-doped fiber laser at 1560 nm to the transverse modes of a folded optical cavity. The optical potential was mapped in situ using cold rubidium atoms, whose potential energy was spectrally resolved thanks to the strong differential light shift induced by the 1560 nm laser on the two levels of the probe transition. The optical potential obtained in the cavity is suitable for trapping rubidium atoms and eventually to achieve all-optical Bose-Einstein condensation directly in the resonator.
We report the precise characterization of the optical potential obtained by injecting a distributed-feedback erbium-doped fiber laser at 1560 nm to the transverse modes of a folded optical cavity. The optical potential was mapped in situ using cold rubidium atoms, whose potential energy was spectrally resolved thanks to the strong differential light shift induced by the 1560 nm laser on the two levels of the probe transition. The optical potential obtained in the cavity is suitable for trapping rubidium atoms and eventually to achieve all-optical Bose-Einstein condensation directly in the resonator.
The mapping of the potential landscape with high spatial resolution is crucial for quantum technologies based on ultracold atoms. However, the imaging of optical dipole traps is challenging because purely optical methods, commonly used to profile laser beams in free space, are not applicable in a vacuum. In this work, we demonstrate precise in situ imaging of optical dipole traps by probing a hyperfine transition with Ramsey interferometry. Thereby, we obtain an absolute map of the potential landscape with micrometer resolution and shot-noise-limited spectral precision. The idea of the technique is to control the polarization ellipticity of the trap laser beam to induce a differential light shift proportional to the trap potential. By studying the response to polarization ellipticity, we uncover a small but significant nonlinearity in addition to a dominant linear behavior, which is explained by the geometric distribution of the atomic ensemble. Our technique for imaging of optical traps can find wide application in quantum technologies based on ultracold atoms, as it applies to multiple atomic species and is not limited to a particular wavelength or trap geometry.
In 1925, Einstein predicted the condensation of bosons into the ground state of the system for low (but finite) temperatures. Several phenomena, including superfluidity and superconductivity have been associated with Bose-Einstein condensation, but these systems interact strongly with their environment and pure Bose-Einstein condensation could not be established. It took 70 years, in which time the laser was discovered, and laser cooling techniques to manipulate atoms in a dilute atomic gas, before Bose-Einstein condensation in dilute atomic gases could be demonstrated in 1995. In the first condensation experiments, BECs were created in a magnetic trap. Since in a magnetic trap not all mF states of the atom can be trapped simultaneously, thereby limiting the number of experiments that can be done, other ways of trapping and generating BECs were sought and found. In 2001, the first all-optical BEC was made, where the dipole force was used to trap atoms in the crossing of two far red detuned laser beams. In an optical dipole trap not only atoms in different internal states can be trapped, but also different atomic species simultaneously. In this thesis, the formation of an all-optical Bose-Einstein condensate with rubidium atoms is presented. Conventional all-optical BECs are usually created in high power CO2 laser dipole traps, or have complicated laser cooling schemes and complex dipole trap setups. In our simple and straightforward setup, we load rubidium atoms from a magneto-optical trap into a crossed optical dipole trap created by a single frequency Yb:YAG laser with a wavelength at 1030 nm. The small wavelength allows for a small diffraction limit, and permits us to use standard optical materials, thus making the experimental setup cost effective. Other attempts to achieve Bose-Einstein condensation in a multi-mode (frequency) fiber laser at 1064 nm failed, because the atom loss was quite high. It is assumed that the multi-mode character of the fiber laser induces Raman transitions in rubidium atoms, thereby heating them. We can trap about ∼ 5E7 atoms in a single beam dipole trap out of ∼ 5E9 atoms trapped in theMOT, and ∼ 350,000 atoms can be trapped in a crossed beam dipole trap due to the smaller trap volume. 70% of the atoms in the dipole trap is optically pumped into one mF state. Quantum degeneracy is reached by evaporatively cooling the atoms in the crossed dipole trap by ramping down the laser power with three linear ramps. We can independently change the power of each beam by an AOM. This allows us to use one beam as an atom waveguide for future experiments. After evaporation, we typically have about 10,000 atoms at a temperature below the critical temperature. We have proved Bose-Einstein condensation by using the anisotropic expansion of a quantum degenerate gas trapped in an anisotropic potential. The aspect ratio of our atom cloud changed during a time of flight from 0.7 to 1.2 in 10 ms, thus proving that we have reached quantum degeneracy. We have about 5,000 condensed atoms in our optical dipole trap at a temperature less than 100 nK. The remaining atoms are thermal. Bose-Einstein condensation is obtained within 8 s, and we can repeat the experiment every 30 s. It should be mentioned that the Bose-Einstein experiment was moved from the ”Leibniz Universität Hannover” to the ”Technische Universität Darmstadt”, and had to be completely rebuilt. All-optical Bose-Einstein condensation was reached within one year after the move. Our Bose-Einstein condensation setup presents an ideal starting point for using our condensates in combination with miniaturized atom optical setups based on our novel microfabricated optical elements. With our microlenses, we can create a number of possible dipole trap configurations, such as the dipole trap array or the cylindrical microlens array. Using microlenses in miniaturized atom optical setups opens a completely new field of coherent atom optics. Also because the tight confinement of the microtraps allows us to load a 3D BEC, a 1D BEC, or a Tonks-Girardeau gas in the micropotentials depending on the density.
Using two crossed 1064-nm optical-dipole-trap lasers to be the Raman beams, an effective vector gauge potential for Bose-Einstein condensed 87Rb in the F=2 hyperfine ground state is experimentally created. The moderate strength of the Raman coupling still can be achieved when the detuning from atomic resonance is larger than the excited-state fine structure, since rubidium has 15 nm energy-level spitting. The atoms at the far detuning of the Raman coupling are loaded adiabatically into the dressed states by ramping the homogeneous bias magnetic field with different paths and the dressed states with different energies are studied experimentally. The experimental scheme can be easily extended to produce the synthetic magnetic or electric field by means of a spatial or time dependence of the effective vector potential.
Summary form only given. The strong atom-photon coupling generated inside high-finesse optical micro cavity lets us detect a single atom trajectory in real time. Such a strong coupling is a candidate for trapping a single atom with a single photon. Dynamics of trapped atoms can be observed in situ and in real time by detecting intensity change on the transmission of a blue-shifted laser beam. We cooled down and trapped rubidium atoms by using conventional cell magneto optical trap (MOT) and launched them into the micro optical cavity which locates 35 mm above the MOT. By using this signal as trigger and changing the laser frequency, it is, in principle, possible to trap the atom in the cavity.
In this work I present the experimental realization of a versatile platform for the interplay between light and matter at the single-quanta level. In particular, I demonstrate the high cooperativity of small ensembles of rubidium atoms strongly coupled to a state-of-the-art, open fiber-based microcavity, emphasizing the capabilities of the system as an efficient source and storage device for single photons. The first part of this thesis focusses on the construction and characterization of the microresonator, which is composed of two dielectric mirrors machined on the end-facets of optical glass fibers. Through the implementation of an in-house facility, a large number of fiber-based mirrors are manufactured and precisely characterized. I present a theoretical model that explains, for the first time, the asymmetry in their reflective line shape and that has important implications for the optimal alignment of fiber-based cavities. In the following chapter, I introduce the main experimental apparatus, which contains a miniaturized fiber cavity -- with small mode volume and a linewidth of k≈2(pi)x25 MHz -- that is actively stabilized and integrated in a compact assembly. The monolithic structure features several high-numerical aperture (NA) lenses that provide the necessary tools for the trapping, manipulation and high-resolution imaging of atoms inside the resonator. Neutral rubidium atoms are delivered by an optical conveyor belt from the cooling region into the cavity mode, where their presence is monitored by probing the cavity field. This allows us to perform real-time optical feedback in the transport scheme and to observe the characteristic vacuum Rabi splitting for individual atoms in a non-destructive manner. Due to the small mode volume of the microcavity, coupling strengths up to g=2(pi)x100 MHz are observed for single atoms, corresponding to light-matter interaction in the strong coupling regime. The system's cooperativity is collectively enhanced more than five times when placing a small atomic ensemble inside the resonator. Such a fast interaction rate and the high transmission of the input cavity mirror provide a rapid, non-destructive readout of the internal hyperfine state of a coupled atom, yielding fidelities of 99.8% in 5 ms with less than 1% population transfer and negligible atom losses. The last part of the thesis is dedicated to the study of the influence of the cavity on the emission properties of an atom. I show how, despite the small solid angle covered by the cavity mode, the resonator alters the radiation pattern of an externally pumped single atom and increases its emission rate by a factor of 15 due to the process known as cavity back-action. More than 90% of the emitted photons are collected by the single cavity-mode -- as a result of the strong Purcell enhancement -- and subsequently channeled out by one of the fiber mirrors. A characterization of the photon statistics of the cavity output shows a clear antibunching dip, confirming that the emission corresponds to a single quantum emitter and that our system can be used as a readily fiber-coupled, efficient single-photon source.