Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1002.1536 · Physical Review Letters

Fault Tolerance with Noisy and Slow Measurements and Preparation

Gerardo A. Paz-Silva, Gavin K. Brennen, Jason Twamley

Published Aug 30, 2010• 38 citations
arXivHTMLPDF

Abstract

It is not so well known that measurement-free quantum error correction protocols can be designed to achieve fault-tolerant quantum computing. Despite their potential advantages in terms of the relaxation of accuracy, speed, and addressing requirements, they have usually been overlooked since they are expected to yield a very bad threshold. We show that this is not the case. We design fault-tolerant circuits for the 9-qubit Bacon-Shor code and find an error threshold for unitary gates and preparation of p((p,g)thresh)=3.76×10(-5) (30% of the best known result for the same code using measurement) while admitting up to 1/3 error rates for measurements and allocating no constraints on measurement speed. We further show that demanding gate error rates sufficiently below the threshold pushes the preparation threshold up to p((p)thresh)=1/3.

DOI
10.1103/physrevlett.105.100501

Related papers

Towards Demonstrating Fault Tolerance in Small Circuits Using Bacon-Shor Codes

Ariel Shlosberg, Anthony Polloreno, Graeme Smith

Quantum error correction is necessary to perform large-scale quantum computations in the presence of noise and decoherence. As a result, several aspects of quantum error correction have already been explored. These have been primarily studies of quantum memory[1, 2], an important first step towards quantum computation, where the objective is to increase the lifetime of the encoded quantum information. Additionally, several works have explored the implementation of logical gates[3-5]. In this work we study a next step - fault-tolerantly implementing quantum circuits. We choose the $[[4, 1, 2]]$ Bacon-Shor subsystem code, which has a particularly simple error-detection circuit. Through both numerics and site-counting arguments, we compute pseudo-thresholds for the Pauli error rate $p$ in a depolarizing noise model, below which the encoded circuits outperform the unencoded circuits. These pseudo-threshold values are shown to be as high as $p=3\%$ for short circuits, and $p=0.6\%$ for circuits of moderate depth. Additionally, we see that multiple rounds of stabilizer measurements give an improvement over performing a single round at the end. This provides a concrete suggestion for a small-scale fault-tolerant demonstration of a quantum algorithm that could be accessible with existing hardware.

arXiv:2108.02079•Aug 4, 2021•3 citations

Models of fault-tolerant quantum computation

Christopher M. Dawson

This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.

•Jan 1, 2006•0 citations

Fault-Tolerant Quantum Computation with Constant Error Rate

Dorit Aharonov, Michael Ben-Or

This paper shows that quantum computation can be made fault-tolerant against errors and inaccuracies when $\eta$, the probability for an error in a qubit or a gate, is smaller than a constant threshold $\eta_c$. This result improves on Shor's result [Proceedings of the 37th Symposium on the Foundations of Computer Science, IEEE, Los Alamitos, CA, 1996, pp. 56–65], which shows how to perform fault-tolerant quantum computation when the error rate $\eta$ decays polylogarithmically with the size of the computation, an assumption which is physically unreasonable. The cost of making the quantum circuit fault-tolerant in our construction is polylogarithmic in time and space. Our result holds for a very general local noise model, which includes probabilistic errors, decoherence, amplitude damping, depolarization, and systematic inaccuracies in the gates. Moreover, we allow exponentially decaying correlations between the errors both in space and in time. Fault-tolerant computation can be performed with any universal set of gates. The result also holds for quantum particles with $p>2$ states, namely, p-qudits, and is also generalized to one-dimensional quantum computers with only nearest-neighbor interactions. No measurements, or classical operations, are required during the quantum computation. We estimate the threshold of our construction to be $\eta_c\simeq 10^{-6}$, in the best case. By this we show that local noise is in principle not an obstacle for scalable quantum computation. The main ingredient of our proof is the computation on states encoded by a quantum error correcting code (QECC). To this end we introduce a special class of Calderbank–Shor–Steane (CSS) codes, called polynomial codes (the quantum analogue of Reed–Solomon codes). Their nice algebraic structure allows all of the encoded gates to be transversal. We also provide another version of the proof which uses more general CSS codes, but its encoded gates are slightly less elegant. To achieve fault tolerance, we encode the quantum circuit by another circuit by using one of these QECCs. This step is repeated polyloglog many times, each step slightly improving the effective error rate, to achieve the desired reliability. The resulting circuit exhibits a hierarchical structure, and for the analysis of its robustness we borrow terminology from Khalfin and Tsirelson [Found. Phys., 22 (1992), pp. 879–948] and Gács [Advances in Computing Research: A Research Annual: Randomness and Computation, JAI Press, Greenwich, CT, 1989]. The paper is to a large extent self-contained. In particular, we provide simpler proofs for many of the known results we use, such as the fact that it suffices to correct for bit-flips and phase-flips, the correctness of CSS codes, and the fact that two-qubit gates are universal, together with their extensions to higher-dimensional particles. We also provide full proofs of the universality of the sets of gates we use (the proof of universality was missing in Shor's paper). This paper thus provides a self-contained and complete proof of universal fault-tolerant quantum computation in the presence of local noise.

arXiv:quant-ph/9906129•SIAM Journal on Computing•Jan 1, 2008•806 citations

Fault-Tolerant Coding for Quantum Communication

Matthias Christandl, Alexander Müller‐Hermes

Designing encoding and decoding circuits to reliably send messages over many uses of a noisy channel is a central problem in communication theory. When studying the optimal transmission rates achievable with asymptotically vanishing error it is usually assumed that these circuits can be implemented using noise-free gates. While this assumption is satisfied for classical machines in many scenarios, it is not expected to be satisfied in the near term future for quantum machines where decoherence leads to faults in the quantum gates. As a result, fundamental questions regarding the practical relevance of quantum channel coding remain open. By combining techniques from fault-tolerant quantum computation with techniques from quantum communication, we initiate the study of these questions. We introduce fault-tolerant versions of quantum capacities quantifying the optimal communication rates achievable with asymptotically vanishing total error when the encoding and decoding circuits are affected by gate errors with small probability. Our main results are threshold theorems for the classical and quantum capacity: For every quantum channel$T$and every$\epsilon >0$there exists a threshold$p(\epsilon,T)$for the gate error probability below which rates larger than$C-\epsilon $are fault-tolerantly achievable with vanishing overall communication error, where$C$denotes the usual capacity. Our results are not only relevant in communication over large distances, but also on-chip, where distant parts of a quantum computer might need to communicate under higher levels of noise than affecting the local gates.

arXiv:2009.07161•IEEE Transactions on Information Theory•Apr 21, 2022•20 citations

Lower overhead fault-tolerant building blocks for noisy quantum computers

Prithviraj Prabhu

Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.

quant-pharXiv:2605.12385•May 13, 2026•0 citations

Improved Error Thresholds for Measurement-Free Error Correction

Daniel Crow, Robert Joynt, Mark E. Saffman

Motivated by limitations and capabilities of neutral atom qubits, we examine whether measurement-free error correction can produce practical error thresholds. We show that this can be achieved by extracting redundant syndrome information, giving our procedure extra fault tolerance and eliminating the need for ancilla verification. The procedure is particularly favorable when multiqubit gates are available for the correction step. Simulations of the bit-flip, Bacon-Shor, and Steane codes indicate that coherent error correction can produce threshold error rates that are on the order of 10^{-3} to 10^{-4}-comparable with or better than measurement-based values, and much better than previous results for other coherent error correction schemes. This indicates that coherent error correction is worthy of serious consideration for achieving protected logical qubits.

arXiv:1510.08359•Physical Review Letters•Sep 21, 2016•50 citations
It is not so well known that measurement-free quantum error correction protocols can be designed to achieve fault-tolerant quantum computing. Despite their potential advantages in terms of the relaxation of accuracy, speed, and addressing requirements, they have usually been overlooked since they are expected to yield a very bad threshold. We show that this is not the case. We design fault-tolerant circuits for the 9-qubit Bacon-Shor code and find an error threshold for unitary gates and preparation of p((p,g)thresh)=3.76×10(-5) (30% of the best known result for the same code using measurement) while admitting up to 1/3 error rates for measurements and allocating no constraints on measurement speed. We further show that demanding gate error rates sufficiently below the threshold pushes the preparation threshold up to p((p)thresh)=1/3.
Quantum error correction is necessary to perform large-scale quantum computations in the presence of noise and decoherence. As a result, several aspects of quantum error correction have already been explored. These have been primarily studies of quantum memory[1, 2], an important first step towards quantum computation, where the objective is to increase the lifetime of the encoded quantum information. Additionally, several works have explored the implementation of logical gates[3-5]. In this work we study a next step - fault-tolerantly implementing quantum circuits. We choose the [[4,1,2]][[4, 1, 2]][[4,1,2]] Bacon-Shor subsystem code, which has a particularly simple error-detection circuit. Through both numerics and site-counting arguments, we compute pseudo-thresholds for the Pauli error rate ppp in a depolarizing noise model, below which the encoded circuits outperform the unencoded circuits. These pseudo-threshold values are shown to be as high as p=3%p=3\%p=3% for short circuits, and p=0.6%p=0.6\%p=0.6% for circuits of moderate depth. Additionally, we see that multiple rounds of stabilizer measurements give an improvement over performing a single round at the end. This provides a concrete suggestion for a small-scale fault-tolerant demonstration of a quantum algorithm that could be accessible with existing hardware.
This thesis is concerned with certain theoretical problems that arise naturally in the context of fault-tolerant quantum computation. Fault-tolerance can be defined as the art of building reliable devices from unreliable components, and is of particular importance for quantum computers that aim to precisely control the dynamics of extremely sensitive quantum systems. A model of quantum computation is a specification of the basic building blocks by which a quantum computation is implemented. The best known model is the quantum circuit model, where computations are implemented by means of unitary quantum gates that are applied to two-level quantum systems known as qubits. In a physical implementation of a quantum circuit, the gates and qubits will inevitably be affected by noise. Fault-tolerant quantum circuits are designed to be resilient against the effects of this noise, provided that it is not too strong. Fault-tolerance in the quantum circuit model is well developed thanks to the theory of quantum error-correcting codes. These codes allow for the correction of small numbers of errors introduced by a variety of noise processes. In a fault-tolerant quantum circuit, qubits are replaced with encoded qubits, and quantum gates with encoded gates that are immediately followed by special quantum circuits for error correction. Provided the rate at which errors occur is below a constant threshold value, the accumulation of errors can be checked so that the correct output of the computation correctly determined. The threshold acts as both a measure of how good the design of a quantum circuit is, and also as a target for experimenters aiming to implement quantum circuits. Much current research in quantum computation is aimed at designing quantum circuits that increase the noise threshold, hopefully to the point where it becomes within the reach of experimenters. A fault-tolerant encoded quantum gate must limit the propagation of errors so that the code’s corrective capabilities are not overwhelmed. It is not so easy to design encoded gates that satisfy this property, and to date only a finite handful of such gates are known. In a faulttolerant quantum circuit, all quantum gates must be decomposed or compiled in terms of those that may be implemented fault-tolerantly. In the first part of this thesis, we present two results that may be applied to this problem of gate compilation. The first is a generic method based on the Solovay-Kitaev theorem that may be applied to all quantum gates, but is most effective for those that act on single qubits. We present the Solovay-Kitaev theorem in its simples known form as an algorithm, together with novel constructions that can be used to implement it. Following this we give a two specialized methods for two-qubit gate decomposition, based on the Cartan decomposition of the Lie group SU(4). The cluster-state model of computation is an alternative to the quantum circuit model, and makes use of quantum measurements and highly entangled cluster-states to implement a quantum computation. The fault-tolerant techniques developed for quantum circuits are not immediately applicable in this model, so in order for it to be a realistic candidate for performing computations we prove that such techniques are possible. In the second part of the thesis we prove that constant fault-tolerance thresholds may be achieved in the cluster-state model, and in particular in an adaption to an optical implementation. Following this we design a complete error correction scheme for optical cluster-state computation, and numerically determine the threshold of this model in the face of the dominant noise models likely to affect such an implementation.
This paper shows that quantum computation can be made fault-tolerant against errors and inaccuracies when η\etaη, the probability for an error in a qubit or a gate, is smaller than a constant threshold ηc\eta_cηc​. This result improves on Shor's result [Proceedings of the 37th Symposium on the Foundations of Computer Science, IEEE, Los Alamitos, CA, 1996, pp. 56–65], which shows how to perform fault-tolerant quantum computation when the error rate η\etaη decays polylogarithmically with the size of the computation, an assumption which is physically unreasonable. The cost of making the quantum circuit fault-tolerant in our construction is polylogarithmic in time and space. Our result holds for a very general local noise model, which includes probabilistic errors, decoherence, amplitude damping, depolarization, and systematic inaccuracies in the gates. Moreover, we allow exponentially decaying correlations between the errors both in space and in time. Fault-tolerant computation can be performed with any universal set of gates. The result also holds for quantum particles with p>2p>2p>2 states, namely, p-qudits, and is also generalized to one-dimensional quantum computers with only nearest-neighbor interactions. No measurements, or classical operations, are required during the quantum computation. We estimate the threshold of our construction to be ηc≃10−6\eta_c\simeq 10^{-6}ηc​≃10−6, in the best case. By this we show that local noise is in principle not an obstacle for scalable quantum computation. The main ingredient of our proof is the computation on states encoded by a quantum error correcting code (QECC). To this end we introduce a special class of Calderbank–Shor–Steane (CSS) codes, called polynomial codes (the quantum analogue of Reed–Solomon codes). Their nice algebraic structure allows all of the encoded gates to be transversal. We also provide another version of the proof which uses more general CSS codes, but its encoded gates are slightly less elegant. To achieve fault tolerance, we encode the quantum circuit by another circuit by using one of these QECCs. This step is repeated polyloglog many times, each step slightly improving the effective error rate, to achieve the desired reliability. The resulting circuit exhibits a hierarchical structure, and for the analysis of its robustness we borrow terminology from Khalfin and Tsirelson [Found. Phys., 22 (1992), pp. 879–948] and Gács [Advances in Computing Research: A Research Annual: Randomness and Computation, JAI Press, Greenwich, CT, 1989]. The paper is to a large extent self-contained. In particular, we provide simpler proofs for many of the known results we use, such as the fact that it suffices to correct for bit-flips and phase-flips, the correctness of CSS codes, and the fact that two-qubit gates are universal, together with their extensions to higher-dimensional particles. We also provide full proofs of the universality of the sets of gates we use (the proof of universality was missing in Shor's paper). This paper thus provides a self-contained and complete proof of universal fault-tolerant quantum computation in the presence of local noise.
Designing encoding and decoding circuits to reliably send messages over many uses of a noisy channel is a central problem in communication theory. When studying the optimal transmission rates achievable with asymptotically vanishing error it is usually assumed that these circuits can be implemented using noise-free gates. While this assumption is satisfied for classical machines in many scenarios, it is not expected to be satisfied in the near term future for quantum machines where decoherence leads to faults in the quantum gates. As a result, fundamental questions regarding the practical relevance of quantum channel coding remain open. By combining techniques from fault-tolerant quantum computation with techniques from quantum communication, we initiate the study of these questions. We introduce fault-tolerant versions of quantum capacities quantifying the optimal communication rates achievable with asymptotically vanishing total error when the encoding and decoding circuits are affected by gate errors with small probability. Our main results are threshold theorems for the classical and quantum capacity: For every quantum channelTTTand everyϵ>0\epsilon >0ϵ>0there exists a thresholdp(ϵ,T)p(\epsilon,T)p(ϵ,T)for the gate error probability below which rates larger than$C-\epsilon arefault−tolerantlyachievablewithvanishingoverallcommunicationerror,whereare fault-tolerantly achievable with vanishing overall communication error, wherearefault−tolerantlyachievablewithvanishingoverallcommunicationerror,whereC$denotes the usual capacity. Our results are not only relevant in communication over large distances, but also on-chip, where distant parts of a quantum computer might need to communicate under higher levels of noise than affecting the local gates.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit. We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Motivated by limitations and capabilities of neutral atom qubits, we examine whether measurement-free error correction can produce practical error thresholds. We show that this can be achieved by extracting redundant syndrome information, giving our procedure extra fault tolerance and eliminating the need for ancilla verification. The procedure is particularly favorable when multiqubit gates are available for the correction step. Simulations of the bit-flip, Bacon-Shor, and Steane codes indicate that coherent error correction can produce threshold error rates that are on the order of 10^{-3} to 10^{-4}-comparable with or better than measurement-based values, and much better than previous results for other coherent error correction schemes. This indicates that coherent error correction is worthy of serious consideration for achieving protected logical qubits.