Quantum computers hold the promise to solve some hard problems that are intractable for even the most powerful current supercomputers. One of the most famous examples is Shor's algorithm for factorizing large numbers, which has exponential speedup compared to its best classical counterparts. However, running such an algorithm will require to build a large-scale quantum computer consisting of thousands or even millions of qubits that include quantum error correction (QEC) and fault-tolerant (FT) mechanisms. Quantum computing is already a reality with the so-called Noisy Intermediate-Scale Quantum (NISQ) processors, some of them available in the cloud. Noisy refers to the imperfect control over the qubits and intermediate-scale to the relatively low number of quits (from fifty to a few hundred). Although current and near-term quantum devices will not have enough qubits for implementing large and fully corrected quantum computations, the use of small quantum error correction codes may extend the computation lifetime of NISQ devices. In this context and as a first step, it is important to test and demonstrate the fault-tolerance of these QEC codes. In this thesis, we explore the fault-tolerance of two small quantum correction codes that are good candidates to be applied to NISQ processors, the [[4,2,2]] code and the [[7,1,3]] Steane code. To this purpose, by following the FT criterion prosed by Daniel Gottesman in 2016, we tested both codes using two simulators, the stabilizer formalism simulator that includes quite simple error models and a full density matrix simulator called quantumsim, which includes more realistic noise. The simulations are performed under reasonable noise parameter values. For the [[4,2,2]] code, 235 circuits are tested based on the two simulators. The results show that in the stabilizer formalism simulation, the FT criterion is satised for all circuits, while not fully satisfied in the full density matrix simulation. For the [[7,1,3]] Steane code, we use a parallel-flag error correction implementation which is tested using the full density matrix simulator. Our results show that without applying any QEC cycle, for all circuits (84 circuits for 1 logical qubit simulation and 452 circuits for 2 logical qubits simulation), the error rate of the encoded circuits is lower than the unencoded ones. Adding a quantum error correction (QEC) cycle will in general increase the error rate of the computation.
A Bacon-Shor code is a subsystem quantum error-correcting code on an $L\ifmmode\times\else\texttimes\fi{}L$ lattice where the $2(L\ensuremath{-}1)$ weight-
2L stabilizers are usually inferred from the measurements of $2L(L\ensuremath{-}1)$ weight-2 gauge operators. Here, we show that the stabilizers can be measured directly and fault tolerantly with bare ancillary qubits by constructing circuits that follow the pattern of gauge operators. We then examine the implications of this method for small quantum error-correcting codes by comparing distance-3 versions of the rotated surface code and the Bacon-Shor code with the standard depolarizing model and in the context of a trapped-ion quantum computer. We find that for a simple circuit of prepare, error correct, and measure, the Bacon-Shor code outperforms the surface code by requiring fewer qubits, taking less time, and having a lower error rate.
The goal of this paper is to review the theoretical basis for achieving a faithful quantum information transmission and processing in the presence of noise. Initially encoding and decoding, implementing gates and quantum error correction will be considered error free. Finally we will relax this non realistic assumption, introducing the quantum fault-tolerant concept. The existence of an error threshold permits to conclude that there is no physical law preventing a quantum computer from being built. An error model based on the depolarizing channel will be able to provide a simple estimation of the storage or memory computation error threshold: < 5.2 10-5. The encoding is made by means of the [[7,1,3]] Calderbank-Shor-Steane quantum code and the Shor's fault-tolerant method to measure the stabilizer's generators is used.
This paper shows that quantum computation can be made fault-tolerant against errors and inaccuracies when
η, the probability for an error in a qubit or a gate, is smaller than a constant threshold
ηc. This result improves on Shor's result [Proceedings of the 37th Symposium on the Foundations of Computer Science, IEEE, Los Alamitos, CA, 1996, pp. 56–65], which shows how to perform fault-tolerant quantum computation when the error rate
η decays polylogarithmically with the size of the computation, an assumption which is physically unreasonable. The cost of making the quantum circuit fault-tolerant in our construction is polylogarithmic in time and space. Our result holds for a very general local noise model, which includes probabilistic errors, decoherence, amplitude damping, depolarization, and systematic inaccuracies in the gates. Moreover, we allow exponentially decaying correlations between the errors both in space and in time. Fault-tolerant computation can be performed with any universal set of gates. The result also holds for quantum particles with
p>2 states, namely, p-qudits, and is also generalized to one-dimensional quantum computers with only nearest-neighbor interactions. No measurements, or classical operations, are required during the quantum computation. We estimate the threshold of our construction to be
ηc≃10−6, in the best case. By this we show that local noise is in principle not an obstacle for scalable quantum computation. The main ingredient of our proof is the computation on states encoded by a quantum error correcting code (QECC). To this end we introduce a special class of Calderbank–Shor–Steane (CSS) codes, called polynomial codes (the quantum analogue of Reed–Solomon codes). Their nice algebraic structure allows all of the encoded gates to be transversal. We also provide another version of the proof which uses more general CSS codes, but its encoded gates are slightly less elegant. To achieve fault tolerance, we encode the quantum circuit by another circuit by using one of these QECCs. This step is repeated polyloglog many times, each step slightly improving the effective error rate, to achieve the desired reliability. The resulting circuit exhibits a hierarchical structure, and for the analysis of its robustness we borrow terminology from Khalfin and Tsirelson [Found. Phys., 22 (1992), pp. 879–948] and Gács [Advances in Computing Research: A Research Annual: Randomness and Computation, JAI Press, Greenwich, CT, 1989]. The paper is to a large extent self-contained. In particular, we provide simpler proofs for many of the known results we use, such as the fact that it suffices to correct for bit-flips and phase-flips, the correctness of CSS codes, and the fact that two-qubit gates are universal, together with their extensions to higher-dimensional particles. We also provide full proofs of the universality of the sets of gates we use (the proof of universality was missing in Shor's paper). This paper thus provides a self-contained and complete proof of universal fault-tolerant quantum computation in the presence of local noise.
Abstract As quantum computing hardware steadily increases in qubit count and quality, one important question is how to allocate these resources to mitigate the effects of hardware noise. In a transitional era between noisy small-scale and fully fault-tolerant systems, we envisage a scenario in which we are only able to error-correct a fraction of the qubits required to perform an interesting computation. In this work, we develop concrete constructions of logical operations on a joint system of a collection of noisy and a collection of error-corrected logical qubits. Within this setting and under Pauli noise assumptions, we provide analytic evidence that brick-layered circuits display on average slower concentration to the “useless” uniform distribution with increasing circuit depth compared to fully noisy circuits. We corroborate these findings by numerical demonstration of slower decoherence with an increasing fraction of error-corrected qubits under depolarizing noise acting at the circuit level. We find that this advantage only manifests when the number of error-corrected qubits passes a specified threshold which depends on the number of couplings between error-corrected and noisy registers.
This thesis is concerned with fault-tolerant quantum information processing using quantum error-correcting codes. It contains two major pieces of work. The first is a study of coherent noise in the context of stabilizer error-correcting codes. The second is a proposed scheme for a universal set of fault-tolerant logical gates in a particular code family built out of the 3D toric code. Chapter 1 provides an introduction to quantum computation and fault tolerance. Many basic concepts in error-correcting codes are defined. Special attention is paid to the set of code properties that are most likely to determine how easily a given fault-tolerant scheme might be implemented on a physical device. These include the fault-tolerant noise threshold and the overhead. In Chapters 2 and 3 we study the effectiveness of quantum error correction against coherent noise. Coherent errors (for example, unitary noise) can interfere constructively, so that in some cases the average infidelity of a quantum circuit subjected to coherent errors may increase quadratically with the circuit size; in contrast, when errors are incoherent (for example, depolarizing noise), the average infidelity increases at worst linearly with circuit size. We consider the performance of quantum stabilizer codes against a noise model in which a unitary rotation is applied to each qubit, where the axes and angles of rotation are nearly the same for all qubits. In Chapter 2 we introduce coherent noise and incoherent noise and a number of methods that are useful for the study of coherent noise. We study the repetition code as a basic example, and we also study a correlated noise model. In Chapter 3 we show that for the toric code subject to such independent coherent noise, and for minimal-weight decoding, the logical channel after error correction becomes increasingly incoherent as the length of the code increases, provided the noise strength decays inversely with the code distance. A similar conclusion holds for weakly correlated coherent noise. Our methods can also be used for analyzing the performance of other codes and fault-tolerant protocols against coherent noise. However, our result does not show that the coherence of the logical channel is suppressed in the more physically relevant case where the noise strength is held constant as the code block grows, and we recount the difficulties that prevented us from extending the result to that case. Nevertheless our work supports the idea that fault-tolerant quantum computing schemes will work effectively against coherent noise, providing encouraging news for quantum hardware builders who worry about the damaging effects of control errors and coherent interactions with the environment. Chapter 4 is connected to another aspect of fault tolerance, fault-tolerant logical gates. The toric code is a promising candidate for fault-tolerant quantum computation because of its high threshold and low-weight stabilizers. A universal gate set in the toric code generally requires magic state distillation, which can incur a significant qubit overhead. In this work we construct an error-correcting code in three dimensions based on the toric code that features a fault-tolerant T gate with no magic state distillation required. We further describe a subsystem version of our code which supports a universal set of fault-tolerant gates. This code can be converted into the stabilizer version using gauge-fixing. We also argue that our code can be converted to a (2+1)-D protocol, where a 2D lattice undergoes a measurement-based protocol over time. In this way, a fault-tolerant logical T gate can be realized in a 2D toric code structure.