Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:0911.0718 · Physical Review B

Strongly correlated metal interfaces in the Gutzwiller approximation

Giovanni Borghi, Michele Fabrizio, Erio Tosatti

Published Mar 23, 2010• 26 citations
arXivHTMLPDF

Abstract

We study the effect of spatial inhomogeneity on the physics of a strongly correlated electron system exhibiting a metallic phase and a Mott insulating phase, represented by the simple Hubbard model. In three dimensions, we consider various geometries, including vacuum-metal-vacuum, a junction between a weakly and a strongly correlated metal, and finally the double junctions metal-Mott insulator-metal and metal-strongly correlated metal-metal. We apply the self-consistent Gutzwiller technique recently developed in our group, whose approximate nature is compensated by an extreme flexibility, ability to treat very large systems, and physical transparency. The main general result is a clear characterization of the position-dependent metallic quasiparticle spectral weight. Its behavior at interfaces reveals the ubiquitous presence of exponential decays and crossovers with decay lengths of clear physical significance. The decay length of the metallic strength in a weakly-strongly correlated metal interface is due to poor screening in the strongly correlated side. That from a metal into a Mott insulator is due to tunneling. In both cases, the decay length is a bulk property and diverges with a critical exponent ($\ensuremath{\sim}1/2$ in the present approximation, mean field in character) as the (continuous, paramagnetic) Mott transition is approached.

DOI
10.1103/physrevb.81.115134

Related papers

Mott Transitions

M. A. Contínentino

Introduction In this chapter we study metal–insulator transitions which occur due to correlations between the charge carriers. This quantum phase transitions results from the competition between kinetic energy and Coulomb repulsion where the latter has the tendency to localise the electrons. The simplest model which describes this competition is the one-band Hubbard model with its two energy scales, the bandwidth W and the Coulomb repulsion U between electrons of opposite spins on the same site. For a fixed density of electrons, n = 1; as the ratio U/W increases, we expect to find a zero-temperature phase transition from a metallic state to an insulator where the electrons are frozen at the lattice sites. The method employed here to investigate this transition is the Gutzwiller approach (Gutzwiller, 1965). This is a variational method which played an important role in providing a framework for the ideas of Mott on the problem of the metal–insulator transition (Mott, 1974). On the metallic side of the transition, this approach describes a metal with renormalised Fermi liquid parameters, essentially with enhanced effective mass and uniform susceptibility. This is the so-called highly correlated electron gas (Brinkman and Rice, 1970) for which the metal oxide V 2 O 3 is the prototype system. In the insulating side, Gutzwiller's approximation yields a noninteracting system of localised electrons. This insulating phase is incompressible , i.e. has zero compressibility and infinite zero temperature susceptibility. The latter is not a consequence of interactions but simply due to the divergence of the Curie susceptibility, χ ∝ 1 /T , of non-interacting moments at T = 0. Then, in Gutzwiller's approach the transition is from a paramagnetic metal to a paramagnetic insulator. We will continue using the designation Mott transition to describe this type of phase transition where the insulating phase has no long-range magnetic order. In real systems, most frequently, localisation due to interactions is accompanied by the appearance of antiferromagnetic order.

Cambridge University Press eBooks•Jan 1, 2017•0 citations

Mott Physics in Multicomponent Systems

김아람

We investigate Hubbard-type models by means of the dynamical mean-field theory (DMFT) combined with the continuous-time quantum Monte Carlo (CTQMC) method. In this thesis, a great deal of effort has been devoted to investigating diverse facets of Mott physics. Interesting phenomena in strongly correlated electron systems emerge mostly when various energy scales compete with each other. We introduce additional degrees of freedom to the standard Hubbard model. The additional degrees of freedom include a staggered lattice potential, two orbitals, bilayer structure, and superconductivity. Depending on the model system, we extend the single-site DMFT to the multi-orbital one or employ cluster extension of the DMFT. In addition, two complementary versions of CTQMC, weak and strong coupling algorithm, are adopted as an impurity solver.\nWe first consider a Mott transition of the Hubbard model in infinite dimensions. The DMFT is employed in combination with the CTQMC method for an accurate description at low temperatures. Through the use of the double occupancy and the energy density, which are directly measured via the CTQMC method, we construct the phase diagram. We pay particular attention to the construction of the first-order phase transition line (PTL) in the coexistence region of metallic and insulating phases. The resulting PTL is found to exhibit reasonable agreement with earlier finite-temperature results. We also show, by including systematically low-temperature data, that the PTL, which is obtained independently of the previous zero-temperature results, approaches monotonically the transition point reported in earlier zero-temperature studies.\nWe next investigate paramagnetic metal-insulator transitions in the infinite-dimensional ionic Hubbard model at finite temperatures. By means of the DMFT with an impurity solver of the CTQMC, we show that an increase in the interaction strength brings about a crossover from a band insulating phase to a metallic one, followed by a first-order transition to the Mott insulating phase. The first-order transition turns into a crossover above a certain critical temperature, which becomes higher as the strength of the staggered lattice potential is increased. Further, analysis of the temperature dependence of the energy density discloses that the intermediate metallic phase is a Fermi liquid. It is also found that the metallic phase is stable against strong staggered potentials even at very low temperatures. \nFinite-temperature phase transitions are also examined in the two-orbital Hubbard model with Ising-type Hunds coupling. We adopt the multi-orbital extension of the DMFT combined with the strong coupling CTQMC. It is found that there emerges a peculiar reverse-sloped first-order Mott transition between the orbital-selective Mott phase and the Mott insulator phase. It turns out that the increase of Hunds coupling lowers the critical temperature of the reverse-sloped Mott transition. Beyond a certain critical value of Hunds coupling the first-order transition becomes a finite-temperature crossover.\nBilayer effects in the Hubbard model are also studied in the dynamical cluster approximation (DCA) combined with the weak coupling algorithm of CTQMC. In the magnetic phase diagrams obtained in earlier studies, there still remain several controversial issues, particularly for weak on-site Coulomb interactions. In this study, we adopt eight-site clusters which preserve the underlying lattice symmetry. Magnetic properties and associated metal-insulator transitions are examined at low temperatures, and their implications to the ground-state phase diagram are also discussed.\nFinally, we discuss the BCS+U model which is a natural generalization of Gutzwiller-projected BCS model. For this study, we use the DCA combined with the weak coupling CTQMC and verify the reliability of our calculation by changing the cluster size. Our main focus is on the correlation effects of the phenomenological d-wave superconductor. The transition between the superconductor and the Mott insulator is observed as we change the interaction strength or doping concentration. We discuss the change in the spectral properties of the system during the transition.

•Jan 1, 2015•0 citations

Density of states and magnetic correlations at a metal-Mott insulator interface

Mi Jiang, G. G. Batrouni, Richard T. Scalettar

The possibility of novel behavior at interfaces between strongly and weakly correlated materials has come under increased study recently. In this paper, we use determinant quantum Monte Carlo to determine the interpenetration of metallic and Mott-insulator physics across an interface in the two-dimensional Hubbard Hamiltonian. We quantify the behavior of the density of states at the Fermi level and the short- and long-range antiferromagnetism as functions of the distance from the interface and with different interaction strength, temperature, and hopping across the interface. Induced metallic behavior into the insulator is evident over several lattice spacings, whereas antiferromagnetic correlations remain small on the metallic side. At large interface hopping, singlets form between the two boundary layers, shielding the two systems from each other.

arXiv:1208.3234•Physical Review B•Nov 12, 2012•11 citations

Electronic transport and dynamics in correlated heterostructures

Giacomo Mazza, A. Amaricci, Massimo Capone +1 more

We investigate by means of the time-dependent Gutzwiller approximation the transport properties of a strongly correlated slab subject to Hubbard repulsion and connected with to two metallic leads kept at a different electrochemical potential. We focus on the real-time evolution of the electronic properties after the slab is connected to the leads and consider both metallic and Mott insulating slabs. When the correlated slab is metallic, the system relaxes to a steady state that sustains a finite current. The zero-bias conductance is finite and independent of the degree of correlations within the slab as long as the system remains metallic. On the other hand, when the slab is in a Mott insulating state, the external bias leads to currents that are exponentially activated by charge tunneling across the Mott-Hubbard gap, consistent with the Landau-Zener dielectric breakdown scenario.

arXiv:1412.6415•Physical Review B•May 15, 2015•32 citations

Metallic surface of a Mott insulator–Mott insulating surface of a metal

Michael Potthoff, Wolfgang Nolting

The dynamical mean-field theory (DMFT) is employed to study the correlation-driven metal-insulator transition in the semi-infinite Hubbard model at half-filling and zero temperature. We consider the low-index surfaces of the three-dimensional simple-cubic lattice, and systematically vary the model parameters at the very surface, the intralayer and interlayer surface hopping, and the surface Coulomb interaction. Within the DMFT the self-energy functional is assumed to be local. Therewith, the problem is self-consistently mapped onto a set of coupled effective impurity models corresponding to the inequivalent layers parallel to the surface. Assuming that the influence of the high-energy Hubbard bands on the low-energy quasiparticle resonance can be neglected at the critical point, a simplified ``linearized DMFT'' becomes possible. The linearized theory, however, is formally equivalent to the Weiss molecular-field theory for the semi-infinite Ising model. This implies that qualitatively the rich phenomenology of the Landau description of second-order phase transitions at surfaces has a direct analog for the surface Mott transition. Motivated by this formal analogy, we work out the predictions of the linearized DMFT in detail. It is found that under certain circumstances the surface of a Mott insulator can be metallic, while a Mott-insulating surface of a normal metal is not possible. We derive the corresponding phase diagrams, the (mean-field) critical exponents and the critical profiles of the quasiparticle weight. The results are confirmed by a fully numerical evaluation of the DMFT equations using the exact-diagonalization (ED) method. By means of the ED approach, we especially investigate the noncritical parts of the phase diagrams and discuss the U and layer dependence of the quasi-particle weight. For strong modifications of the surface model parameters, the surface low-energy electronic structure dynamically decouples from the bulk.

arXiv:cond-mat/9906412•Physical review. B, Condensed matter•Sep 15, 1999•100 citations

Kondo Proximity Effect: How Does a Metal Penetrate into a Mott Insulator?

R. W. Helmes, Theo A. Costi, Achim Rosch

We consider a heterostructure of a metal and a paramagnetic Mott insulator using an adaptation of dynamical mean-field theory to describe inhomogeneous systems. The metal can penetrate into the insulator via the Kondo effect. We investigate the scaling properties of the metal-insulator interface close to the critical point of the Mott insulator. At criticality, the quasiparticle weight decays as 1/x;{2} with distance x from the metal within our mean-field theory. Our numerical results (using the numerical renormalization group as an impurity solver) show that the prefactor of this power law is extremely small.

arXiv:0805.0566•Physical Review Letters•Aug 6, 2008•82 citations
We study the effect of spatial inhomogeneity on the physics of a strongly correlated electron system exhibiting a metallic phase and a Mott insulating phase, represented by the simple Hubbard model. In three dimensions, we consider various geometries, including vacuum-metal-vacuum, a junction between a weakly and a strongly correlated metal, and finally the double junctions metal-Mott insulator-metal and metal-strongly correlated metal-metal. We apply the self-consistent Gutzwiller technique recently developed in our group, whose approximate nature is compensated by an extreme flexibility, ability to treat very large systems, and physical transparency. The main general result is a clear characterization of the position-dependent metallic quasiparticle spectral weight. Its behavior at interfaces reveals the ubiquitous presence of exponential decays and crossovers with decay lengths of clear physical significance. The decay length of the metallic strength in a weakly-strongly correlated metal interface is due to poor screening in the strongly correlated side. That from a metal into a Mott insulator is due to tunneling. In both cases, the decay length is a bulk property and diverges with a critical exponent (\ensuremath∼1/2\ensuremath{\sim}1/2\ensuremath∼1/2 in the present approximation, mean field in character) as the (continuous, paramagnetic) Mott transition is approached.
Introduction In this chapter we study metal–insulator transitions which occur due to correlations between the charge carriers. This quantum phase transitions results from the competition between kinetic energy and Coulomb repulsion where the latter has the tendency to localise the electrons. The simplest model which describes this competition is the one-band Hubbard model with its two energy scales, the bandwidth W and the Coulomb repulsion U between electrons of opposite spins on the same site. For a fixed density of electrons, n = 1; as the ratio U/W increases, we expect to find a zero-temperature phase transition from a metallic state to an insulator where the electrons are frozen at the lattice sites. The method employed here to investigate this transition is the Gutzwiller approach (Gutzwiller, 1965). This is a variational method which played an important role in providing a framework for the ideas of Mott on the problem of the metal–insulator transition (Mott, 1974). On the metallic side of the transition, this approach describes a metal with renormalised Fermi liquid parameters, essentially with enhanced effective mass and uniform susceptibility. This is the so-called highly correlated electron gas (Brinkman and Rice, 1970) for which the metal oxide V 2 O 3 is the prototype system. In the insulating side, Gutzwiller's approximation yields a noninteracting system of localised electrons. This insulating phase is incompressible , i.e. has zero compressibility and infinite zero temperature susceptibility. The latter is not a consequence of interactions but simply due to the divergence of the Curie susceptibility, χ ∝ 1 /T , of non-interacting moments at T = 0. Then, in Gutzwiller's approach the transition is from a paramagnetic metal to a paramagnetic insulator. We will continue using the designation Mott transition to describe this type of phase transition where the insulating phase has no long-range magnetic order. In real systems, most frequently, localisation due to interactions is accompanied by the appearance of antiferromagnetic order.
We investigate Hubbard-type models by means of the dynamical mean-field theory (DMFT) combined with the continuous-time quantum Monte Carlo (CTQMC) method. In this thesis, a great deal of effort has been devoted to investigating diverse facets of Mott physics. Interesting phenomena in strongly correlated electron systems emerge mostly when various energy scales compete with each other. We introduce additional degrees of freedom to the standard Hubbard model. The additional degrees of freedom include a staggered lattice potential, two orbitals, bilayer structure, and superconductivity. Depending on the model system, we extend the single-site DMFT to the multi-orbital one or employ cluster extension of the DMFT. In addition, two complementary versions of CTQMC, weak and strong coupling algorithm, are adopted as an impurity solver.\nWe first consider a Mott transition of the Hubbard model in infinite dimensions. The DMFT is employed in combination with the CTQMC method for an accurate description at low temperatures. Through the use of the double occupancy and the energy density, which are directly measured via the CTQMC method, we construct the phase diagram. We pay particular attention to the construction of the first-order phase transition line (PTL) in the coexistence region of metallic and insulating phases. The resulting PTL is found to exhibit reasonable agreement with earlier finite-temperature results. We also show, by including systematically low-temperature data, that the PTL, which is obtained independently of the previous zero-temperature results, approaches monotonically the transition point reported in earlier zero-temperature studies.\nWe next investigate paramagnetic metal-insulator transitions in the infinite-dimensional ionic Hubbard model at finite temperatures. By means of the DMFT with an impurity solver of the CTQMC, we show that an increase in the interaction strength brings about a crossover from a band insulating phase to a metallic one, followed by a first-order transition to the Mott insulating phase. The first-order transition turns into a crossover above a certain critical temperature, which becomes higher as the strength of the staggered lattice potential is increased. Further, analysis of the temperature dependence of the energy density discloses that the intermediate metallic phase is a Fermi liquid. It is also found that the metallic phase is stable against strong staggered potentials even at very low temperatures. \nFinite-temperature phase transitions are also examined in the two-orbital Hubbard model with Ising-type Hunds coupling. We adopt the multi-orbital extension of the DMFT combined with the strong coupling CTQMC. It is found that there emerges a peculiar reverse-sloped first-order Mott transition between the orbital-selective Mott phase and the Mott insulator phase. It turns out that the increase of Hunds coupling lowers the critical temperature of the reverse-sloped Mott transition. Beyond a certain critical value of Hunds coupling the first-order transition becomes a finite-temperature crossover.\nBilayer effects in the Hubbard model are also studied in the dynamical cluster approximation (DCA) combined with the weak coupling algorithm of CTQMC. In the magnetic phase diagrams obtained in earlier studies, there still remain several controversial issues, particularly for weak on-site Coulomb interactions. In this study, we adopt eight-site clusters which preserve the underlying lattice symmetry. Magnetic properties and associated metal-insulator transitions are examined at low temperatures, and their implications to the ground-state phase diagram are also discussed.\nFinally, we discuss the BCS+U model which is a natural generalization of Gutzwiller-projected BCS model. For this study, we use the DCA combined with the weak coupling CTQMC and verify the reliability of our calculation by changing the cluster size. Our main focus is on the correlation effects of the phenomenological d-wave superconductor. The transition between the superconductor and the Mott insulator is observed as we change the interaction strength or doping concentration. We discuss the change in the spectral properties of the system during the transition.
The possibility of novel behavior at interfaces between strongly and weakly correlated materials has come under increased study recently. In this paper, we use determinant quantum Monte Carlo to determine the interpenetration of metallic and Mott-insulator physics across an interface in the two-dimensional Hubbard Hamiltonian. We quantify the behavior of the density of states at the Fermi level and the short- and long-range antiferromagnetism as functions of the distance from the interface and with different interaction strength, temperature, and hopping across the interface. Induced metallic behavior into the insulator is evident over several lattice spacings, whereas antiferromagnetic correlations remain small on the metallic side. At large interface hopping, singlets form between the two boundary layers, shielding the two systems from each other.
We investigate by means of the time-dependent Gutzwiller approximation the transport properties of a strongly correlated slab subject to Hubbard repulsion and connected with to two metallic leads kept at a different electrochemical potential. We focus on the real-time evolution of the electronic properties after the slab is connected to the leads and consider both metallic and Mott insulating slabs. When the correlated slab is metallic, the system relaxes to a steady state that sustains a finite current. The zero-bias conductance is finite and independent of the degree of correlations within the slab as long as the system remains metallic. On the other hand, when the slab is in a Mott insulating state, the external bias leads to currents that are exponentially activated by charge tunneling across the Mott-Hubbard gap, consistent with the Landau-Zener dielectric breakdown scenario.
The dynamical mean-field theory (DMFT) is employed to study the correlation-driven metal-insulator transition in the semi-infinite Hubbard model at half-filling and zero temperature. We consider the low-index surfaces of the three-dimensional simple-cubic lattice, and systematically vary the model parameters at the very surface, the intralayer and interlayer surface hopping, and the surface Coulomb interaction. Within the DMFT the self-energy functional is assumed to be local. Therewith, the problem is self-consistently mapped onto a set of coupled effective impurity models corresponding to the inequivalent layers parallel to the surface. Assuming that the influence of the high-energy Hubbard bands on the low-energy quasiparticle resonance can be neglected at the critical point, a simplified ``linearized DMFT'' becomes possible. The linearized theory, however, is formally equivalent to the Weiss molecular-field theory for the semi-infinite Ising model. This implies that qualitatively the rich phenomenology of the Landau description of second-order phase transitions at surfaces has a direct analog for the surface Mott transition. Motivated by this formal analogy, we work out the predictions of the linearized DMFT in detail. It is found that under certain circumstances the surface of a Mott insulator can be metallic, while a Mott-insulating surface of a normal metal is not possible. We derive the corresponding phase diagrams, the (mean-field) critical exponents and the critical profiles of the quasiparticle weight. The results are confirmed by a fully numerical evaluation of the DMFT equations using the exact-diagonalization (ED) method. By means of the ED approach, we especially investigate the noncritical parts of the phase diagrams and discuss the U and layer dependence of the quasi-particle weight. For strong modifications of the surface model parameters, the surface low-energy electronic structure dynamically decouples from the bulk.
We consider a heterostructure of a metal and a paramagnetic Mott insulator using an adaptation of dynamical mean-field theory to describe inhomogeneous systems. The metal can penetrate into the insulator via the Kondo effect. We investigate the scaling properties of the metal-insulator interface close to the critical point of the Mott insulator. At criticality, the quasiparticle weight decays as 1/x;{2} with distance x from the metal within our mean-field theory. Our numerical results (using the numerical renormalization group as an impurity solver) show that the prefactor of this power law is extremely small.