Nano-manipulation of diamond-based single photon sources
Eric Ampem-Lassen, David Simpson, Brant C. Gibson, Steven Trpkovski, Farhad M. Hossain, Shane T. Huntington, Kumaravelu Ganesan, Lloyd C. L. Hollenberg, Steven Prawer
The ability to manipulate nano-particles at the nano-scale is critical for the development of active quantum systems. This paper presents a technique to manipulate diamond nano-crystals at the nano-scale using a scanning electron microscope, nano-manipulator and custom tapered optical fibre probes. The manipulation of a approximately 300 nm diamond crystal, containing a single nitrogen-vacancy centre, onto the endface of an optical fibre is demonstrated. The emission properties of the single photon source post manipulation are in excellent agreement with those observed on the original substrate.
The ability to manipulate nano-particles at the nano-scale is critical for the development of active quantum systems. This paper presents a technique to manipulate diamond nano-crystals at the nano-scale using a scanning electron microscope, nano-manipulator and custom tapered optical fibre probes. The manipulation of a approximately 300 nm diamond crystal, containing a single nitrogen-vacancy centre, onto the endface of an optical fibre is demonstrated. The emission properties of the single photon source post manipulation are in excellent agreement with those observed on the original substrate.
Defects in diamond have evolved as unique object for their potential application for Optical imaging and Nano-photonics. High pressure high temperature (HPHT) grown type-Ib diamond particles were milled down to the size of ~ 80 nm and purified to remove iron & graphitic carbon impurities and irradiated with 35 KeV He+ ions to create vacancies in the diamond lattice. Vacancies diffuse close to substitutional nitrogen impurities of nano-diamond particles upon thermal treatment. Characteristic sharp emission of NV centers were observed at 575.5 nm and 637.9 nm corresponding to NV° and NV− charged states in addition to a broad emission in the range 550-750 nm. Structural and photo-physical behavior of these fluorescent diamonds was found to depend on the method of purification adopted. Samples purified through acid reflux were found suitable for bio-imaging applications while, sample purified through air oxidation shows properties desirable for Nano-photonic applications. Photon-correlation measurements of emission from individual diamond nanoparticles using Hanbury Brown and Twiss interferometer (HBT) shows anti-bunching curve with g2(t)= 0 confirming their suitability as single photon source. Such sources of indistinguishable photons are highly desirable for quantum computation and quantum optics applications.
A diamond nano-crystal hosting a single nitrogen vacancy (NV) center is optically selected with a confocal scanning microscope and positioned deterministically onto the subwavelength-diameter waist of a tapered optical fiber (TOF) with the help of an atomic force microscope. Based on this nano-manipulation technique, we experimentally demonstrate the evanescent coupling of single fluorescence photons emitted by a single NV-center to the guided mode of the TOF. By comparing photon count rates of the fiber-guided and the free-space modes and with the help of numerical finite-difference time domain simulations, we determine a lower and upper bound for the coupling efficiency of (9.5 ± 0.6)% and (10.4 ± 0.7)%, respectively. Our results are a promising starting point for future integration of single photon sources into photonic quantum networks and applications in quantum information science.
The nitrogen-vacancy defect in diamond (NV centre) is a leading candidate for solid-state implementations of quantum information technologies. Among other useful properties, it is a bright source of single photons. It is difficult, though, to collect the emitted photons in a single spatial and spectral mode which is often needed for quantum information applications. One way to improve the single-mode collection efficiency is to embed an NV centre in a high-finesse cavity. The coupling of the NV centre dipole to the cavity mode gives rise to the Purcell enhancement -- an increase of the emission into the cavity's spectral and spatial mode.
The goal of this project will be to develop a fibre-based microcavity and to use it for the observation of enhanced single-photon emission from a diamond nanocrystal. It will involve a wide range of experimental techniques, for example basic optics (particularly Gaussian beam propagation), CO2 laser ablation, surface analysis by optical and atomic force microscopes, interferometry, photon counting, etc. There will also be a certain amount of data analysis, simulations and theoretical calculations.
A huge variety of optical colour centres can be found in diamond, emitting in its whole wide transparency range. Although several of these centres have been demonstrated as single-photon emitters, none of them meets all of the requirements of an ideal single-photon source. In this view, we discuss the properties of prominent optical centres, such as the nitrogen vacancy, the silicon vacancy or the so-called NE8 centre, as well as recently found centres ascribed to defects containing Ni, Si, Cr and Xe. Besides suitable intrinsic properties, it is necessary for practical applications that optical centres can be created artificially on demand. Of all known methods, only ion implantation allows for the most controlled creation of such defect centres. In this paper, we discuss how nanoscalability, that is, the nanometre placement and the deterministic creation of optical centres, can, could or cannot be achieved by the available ion implantation techniques. A fine analysis of individual optical centres is now possible, thanks to the recently developed subdiffraction optical microscopy methods.
Quantum communication and quantum metrology established a demand for an accessible solid state systems which can generate a stream of single photons on demand [1]. Although single photon emission has been demonstrated from quantum dots (QD)[1,2], single molecules [3] and nanowires [4], their practical operation is limited by the temperature or photostability. Diamond crystals, however, are the most promising platform for generation of robust, photo-stable, single photons at room temperature [5,6]. Nevertheless, out of more than 500 existing optical centers in diamond only three known centers demonstrated a clear single photon emission: the nitrogen-vacancy complex [6,7], the silicon-vacancy complex [8] and the nickel-nitrogen complex [9,10]. Recent progress in materials science and fabrication techniques of diamond color centers unveiled novel quantum emitters with photo-physical properties surpassing the current mainstream [11,12,13]. Consequently, the versatility of the diamond lattice to host various impurities which give luminescence signals lead to a dramatic discovery of ultra bright single photon emitters operating in the MHz regime [14]. These new centers, comparable with QD in terms of brightness [1], but have the tremendous advantage of their room temperature operation and photo-stability. Furthermore, it opened a new avenue to investigate essentially an unknown group of single photon emitters. A brief description of the fabrication methods and a detailed quantum optical characterization of this class of diamond emitters is the subject of this presentation. In particular we will present the photo-physical properties of a novel family of single photon emitters, most likely originated from Cr impurities within the chemical vapor deposition grown nano-diamond crystals. We concentrate on the typical emission lines in the range of 740 - 790 nm, which exhibit single photon emission with count rate in the range of 0.8-3.2 106 counts/s at the limit of infinite optical excitation power, and life time as short as 1 ns. Even more, some of the emitters exhibit a photon statistics without any photon bunching, indicating a two-level system with unitary quantum efficiency. We will also show preliminary results of a resonant excitation at 4 K. We will highlight future directions to optimize these sources and avenues to investigate the fundamental properties of these centers.
NV center in diamond is attracting a lot of attention in quantum information processing community [1]. Been spin system in clean and well-controlled environment of diamond it shows outstanding performance as quantum memory even at room temperature, spin control with single shot optical readout and possibility to build up quantum registers even on single NV center. Moreover, NV centers could be used as high-resolution sensitive elements of detectors of magnetic or electric field, temperature, tension, force or rotation. For all of these applications collection of the light emitted by NV center is crucial point. There were number of approaches suggested to address this issue, proposing use of surface plasmoms [2], manufacturing structures in diamond [3] etc. One of the key feature of any practically important interface is compatibility with the fiber technology. Several groups attacking this problem using various approaches. One of them is placing of nanodiamonds in the holes of photonic crystal fiber [4], another is utilization of AFM to pick and place nanodiamond on the tapered fiber[5]. We have developed a novel technique of placing a nanodiamond with single NV center on the tapered fiber by controlled transfer of a nanodiamond from one “donor” tapered fiber to the “target” clean tapered fiber. We verify our ability to transfer only single color centers by means of measurement of second order correlation function. With this technique, we were able to double collection efficiency of confocal microscope. The majority of the factors limiting the collection of photons via optical fiber are technical and may be removed allowing order of magnitude improved in collection. We also discuss number of extensions of this technique to all fiber excitation and integration with nanostructures. References: [1] Marcus W. Doherty, Neil B. Manson, Paul Delaney, Fedor Jelezko, Jörg Wrachtrup, Lloyd C.L. Hollenberg , " The nitrogen-vacancy colour centre in diamond," Physics Reports, vol. 528, no. 1, p. 1–45, 2013. [2] A.V. Akimov, A. Mukherjee, C.L. Yu, D.E. Chang, A.S. Zibrov, P.R. Hemmer, H. Park and M.D. Lukin, "Generation of single optical plasmons in metallic nanowires coupled to quantum dots," Nature, vol. 450, p. 402–406, 2007. [3] Michael J. Burek , Yiwen Chu, Madelaine S.Z. Liddy, Parth Patel, Jake Rochman , Srujan Meesala, Wooyoung Hong, Qimin Quan, Mikhail D. Lukin and Marko Loncar High quality-factor optical nanocavities in bulk single-crystal diamond, Nature communications 6718 (2014) [4] Tim Schroder, Andreas W. Schell, Gunter Kewes, Thomas Aichele, and Oliver Benson Fiber-Integrated Diamond-Based Single Photon Source, Nano Lett. 2011, 11, 198-202 [5]Lars Liebermeister, et. al. “Tapered fiber coupling of single photons emitted by a deterministically positioned single nitrogen vacancy center”, Appl. Phys. Lett. 104, 031101 (2014)